Open Access
MATEC Web Conf.
Volume 306, 2020
The 6th International Conference on Mechatronics and Mechanical Engineering (ICMME 2019)
Article Number 04001
Number of page(s) 11
Section Power Electronics and Transmission Technology
Published online 14 January 2020
  1. B. Bindu, B. Vinod. Measurement of Cutting Forces in CNC Turning Centers: A Review, International. Journal of Mechanical Engineering, 3(5): 77–87, (2015) [Google Scholar]
  2. M. Rizal, J. Ghani, M. Nuawi, C. Haron. A Review of Sensor Systems and Application in Milling Processes for Tool Condition Monitoring, Research Journal of Applied Sciences, Engineering and Technology, 7(10): 2083–2097 (2014) [CrossRef] [Google Scholar]
  3. D. Dimla. Sensor Signals for Tool-Wear Monitoring in Metal Cutting Operations – a Review of Methods, International Journal of Machine Tools and Manufacturing, 40: 1073–1098 (2000) [CrossRef] [Google Scholar]
  4. J. Stein, K. Shin. Current Monitoring of Controlled DC Spindle Drives, Journal of Dynamic Systems, Measurement and Control, 108: 189–295 (1986) [Google Scholar]
  5. Y. Altintas. Prediction of Cutting Forces and Tool Breakage in Milling from Feed Drive Current Measurements, Journal of Engineering for Industry, 114: 386–392 (1992) [CrossRef] [Google Scholar]
  6. G. Kim, N. Chong. Indirect Cutting Force Measurement Considering Frictional Behaviour in a Machining Center using Feed Motor Current, International Journal of Advanced Manufacturing Technology, 15: 478–484 (1999) [CrossRef] [Google Scholar]
  7. R. Sato, M: Hasegawa, K. Shirase. Cutting Force Monitoring based on the Frequency Analysis of Feed Motor Torques, Journal of SME Japan (2013) [Google Scholar]
  8. T. Kim, J. Woo, D. Shin, J. Kim. Indirect Cutting Force Measurement in multi-axis simultaneous NC Milling Processes, International Journal of Machine Tools and Manufacture, 39: 1717–1731 (1999) [CrossRef] [Google Scholar]
  9. G. Pritschow, J Bretschneider, S. Fritz. Reconstruction of Process Forces within Digital Servodrive Systems, Annals of the German Academic Society for Production Engineering, 5(1): 73–78 (1999) [Google Scholar]
  10. T. Murakami, F. Yu, K. Ohnishi. Torque Sensorless Control in Multidegree-of-Freedom Manipulator, IEEE Transactions on Industrial Electronics, 40(2): 259–265 (1993) [CrossRef] [Google Scholar]
  11. Y. Kakinuma, Y. Sudo, T. Aoyama. Detection of chatter vibration in end milling applying disturbance observer, CIRP Annals – Manufacturing Technology, 60: 109–112 (2011) [CrossRef] [Google Scholar]
  12. C. Mitsantisuk, M. Nandayapa, K. Ohnishi, S. Katsura. Design for Sensorless Force Control of Flexible Robot using Resonance Ratio Control based on Coefficient Diagram Method, Journal for Control, Measurement, Electronics, Computing and Communications, 54(1): 62–73 (2013) [Google Scholar]
  13. S. Katsura, J. Suzuki, K. Ohnishi. Pushing Operation by flexible Manipulator Taking Environmental Information into Account, IEEE Transactions on Industrial Electronics, 53(5): 1688–1697 (2006) [CrossRef] [Google Scholar]
  14. Y. Yamada, Y. Kakinuma. Sensorless Cutting force estimation for full-closed controlled ball-screw- driven stage, International Journal of Advanced Manufacturing Technology, 87: 3337–3348 (2016) [CrossRef] [Google Scholar]
  15. K. Hipp. Einsatz hybrider Optimierungsverfahren zur Inbetriebnahme elektromechanischer Systeme, Berichte aus dem IWU, 98 (2017) [Google Scholar]
  16. M. Kunc. Identifikation und Modellierung von nichtlinearen Dämpfungseffekten in Vorschubachsen für Werkzeugmaschinen, Ergebnisse aus der Produktionstechnik, 11 (2013) [Google Scholar]
  17. S. Hofmann. Identifikation parametrischer Modelle für geregelte, elektromechanische Achsen mit modifizierter, sukzessiver Polkompensation, Berichte aus dem IWU, 69 (2012) [Google Scholar]
  18. A. Hellmich, K. Hipp, H. Schlegel, R. Neugebauer. Parameter identification of NC-axes during regular operation of a machine tool, Advanced Materials Research, 1018: 419–426 (2014) [CrossRef] [Google Scholar]
  19. D. Maier. Sensorlose online Zustandserfassung von Vorschubantriebskomponenten in Werkzeugmaschinen, Berichte aus dem institute für Maschinenelemente, 157 (2015) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.