Investigation of thermal, moisture, and mechanical properties of wet and dry fired clay materials to assess frost damage risk

Kazuma Fukui; Chiemi Iba; Madoka Taniguchi; Kouichi Takahashi; Daisuke Ogura

doi:10.1051/matecconf/201928202083

All issues

Volume 282 (2019)

MATEC Web Conf., 282 (2019) 02083

References

Open Access

Issue		MATEC Web Conf. Volume 282, 2019 4^th Central European Symposium on Building Physics (CESBP 2019)


Article Number		02083
Number of page(s)		6
Section		Regular Papers
DOI		https://doi.org/10.1051/matecconf/201928202083
Published online		06 September 2019

M. Maage, Mater. Struct. 17, 345-50 (1984) [Google Scholar]
K. Elert et al., J. Cult. Herit. 4, 91-99 (2003) [CrossRef] [Google Scholar]
M. Radeka et al., Ind. Ceram. 30, 97-104 (2010) [Google Scholar]
J. Ranogajec et al., J. Mater. Civ. Eng. 24, 1254-60 (2012) [CrossRef] [Google Scholar]
G. Wardeh, B. Perrin, Constr. Build. Mater. 22, 820-28 (2008) [CrossRef] [Google Scholar]
C. Iba, A. Ueda, S. Hokoi, Struct. Sur. 34, 135-49 (2016) [CrossRef] [Google Scholar]
J. García Ten et al., Ceram. Int. 36, 1951-59 (2010) [CrossRef] [Google Scholar]
S.N. Monteiro, C.M.F. Vieira, Appl. Clay Sci. 27, 229-34 (2004) [CrossRef] [Google Scholar]
S. Karaman, S. Ersahin, H. Gunal, J. Sci. Ind. Res. 65, 153-59 (2006) [Google Scholar]
I. Johari et al., Sci. Sinter. 42, 245-54 (2010) [CrossRef] [Google Scholar]
S. Karaman, H. Gunal, S. Ersahin, Constr. Build. Mater. 20, 348-54 (2006) [CrossRef] [Google Scholar]
M. Brun et al., Thermochim. Acta. 21, 59-88 (1977) [CrossRef] [Google Scholar]
ISO 8894-2:2007, Refractory materials–Determination of thermal conductivity–Part 2: Hot-wire method (parallel) (2007) [Google Scholar]
M.K. Kumaran, J. Therm. Env. Build. Sci. 22, 349-55 (1999) [CrossRef] [Google Scholar]
JIS R 1668, Testing method for fracture toughness of porous fine ceramics (2005) [Google Scholar]
ASTM C 666, Standard test method for resistance of concrete to rapid freezing and thawing (2015) [Google Scholar]
G. Fagerlund, Critical degrees of saturation at freezing of porous and brittle materials. Lund University, Lund (1973) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.

[1] M. Maage, Mater. Struct. 17, 345-50 (1984) [Google Scholar]

[2] K. Elert et al., J. Cult. Herit. 4, 91-99 (2003) [CrossRef] [Google Scholar]

[3] M. Radeka et al., Ind. Ceram. 30, 97-104 (2010) [Google Scholar]

[4] J. Ranogajec et al., J. Mater. Civ. Eng. 24, 1254-60 (2012) [CrossRef] [Google Scholar]

[5] G. Wardeh, B. Perrin, Constr. Build. Mater. 22, 820-28 (2008) [CrossRef] [Google Scholar]

[6] C. Iba, A. Ueda, S. Hokoi, Struct. Sur. 34, 135-49 (2016) [CrossRef] [Google Scholar]

[7] J. García Ten et al., Ceram. Int. 36, 1951-59 (2010) [CrossRef] [Google Scholar]

[8] S.N. Monteiro, C.M.F. Vieira, Appl. Clay Sci. 27, 229-34 (2004) [CrossRef] [Google Scholar]

[9] S. Karaman, S. Ersahin, H. Gunal, J. Sci. Ind. Res. 65, 153-59 (2006) [Google Scholar]

[10] I. Johari et al., Sci. Sinter. 42, 245-54 (2010) [CrossRef] [Google Scholar]

[11] S. Karaman, H. Gunal, S. Ersahin, Constr. Build. Mater. 20, 348-54 (2006) [CrossRef] [Google Scholar]

[12] M. Brun et al., Thermochim. Acta. 21, 59-88 (1977) [CrossRef] [Google Scholar]

[13] ISO 8894-2:2007, Refractory materials–Determination of thermal conductivity–Part 2: Hot-wire method (parallel) (2007) [Google Scholar]

[14] M.K. Kumaran, J. Therm. Env. Build. Sci. 22, 349-55 (1999) [CrossRef] [Google Scholar]

[15] JIS R 1668, Testing method for fracture toughness of porous fine ceramics (2005) [Google Scholar]

[16] ASTM C 666, Standard test method for resistance of concrete to rapid freezing and thawing (2015) [Google Scholar]

[17] G. Fagerlund, Critical degrees of saturation at freezing of porous and brittle materials. Lund University, Lund (1973) [Google Scholar]