Open Access
Issue
MATEC Web Conf.
Volume 282, 2019
4th Central European Symposium on Building Physics (CESBP 2019)
Article Number 02046
Number of page(s) 9
Section Regular Papers
DOI https://doi.org/10.1051/matecconf/201928202046
Published online 06 September 2019
  1. BASSE. Building Active Steel Skin. General Directorate for Research of the European Commission. RFCS Funds; 2013 – 2016. Grant Agreement nº: RFSR-CT-2013-00026. Retrieved from https://ec.europa.eu/info/sites/info/files/rfcs_infopack2018.pdf. (accessed XXX) [Google Scholar]
  2. P. Elguezabal, A. Lopez, J.M. Blanco & J.A. Chica (2019). CFD model-based analysis and experimental assessment of key design parameters for an integrated unglazed metallic thermal collector façade [Google Scholar]
  3. P. Elguezabal, R. Garay & K.Martin (2017). Experimentation under real performing conditions of a highly integrable unglazed solar collector into a building façade. Energy Procedia. Vol. 122 (2017), 775-780. doi. https://doi.org/10.1016/j.egypro.2017.07.395 [CrossRef] [Google Scholar]
  4. J. Duffie, & W. Beckmann, Solar Engineering of Thermal Processes, fourth Ed., Hoboken, New Jersey, 2013 [Google Scholar]
  5. S. Kumar, S.C. Mullick, Wind heat transfer coefficient in solar collectors in outdoor conditions, Sol. Energy. 84 (2010) 956–963. doi:10.1016/J.SOLENER.2010.03.003. [CrossRef] [Google Scholar]
  6. D.G. Gunjo, P. Mahanta, P.S. Robi, CFD and experimental investigation of flat plate solar water heating system under steady state condition, Renew. Energy. 106 (2017) 24–36. doi:10.1016/j.renene.2016.12.041. [CrossRef] [Google Scholar]
  7. R. O’Hegarty, O. Kinnane, S.J. McCormack, Parametric investigation of concrete solar collectors for façade integration, Sol. Energy. 153 (2017) 396–413. doi:10.1016/J.SOLENER.2017.05.092. [CrossRef] [Google Scholar]
  8. M.C. Rodríguez-Hidalgo, P.A. Rodríguez-Aumente, A. Lecuona, G.L. Gutiérrez-Urueta, R. Ventas, Flat plate thermal solar collector efficiency: Transient behavior under working conditions. Part I: Model description and experimental validation, Appl. Therm. Eng. 31 (2011) 2394–2404. doi:10.1016/J.APPLTHERMALENG.2011.04.003. [CrossRef] [Google Scholar]
  9. M.C. Rodríguez-Hidalgo, P.A. Rodríguez-Aumente, A. Lecuona, G.L. Gutiérrez-Urueta, R. Ventas, Flat plate thermal solar collector efficiency: Transient behavior under working conditions part II: Model application and design contributions, Appl. Therm. Eng. 31 (2011) 2385–2393. doi:10.1016/J.APPLTHERMALENG.2011.04.002. [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.