EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 275 (2019) MATEC Web Conf., 275 (2019) 02002 References
Open Access
Issue
MATEC Web Conf.
Volume 275, 2019
1st International Conference on Advances in Civil Engineering and Materials (ACEM1) and 1st World Symposium on Sustainable Bio-composite Materials and Structures (SBMS1) (ACEM2018 and SBMS1)
Article Number 02002
Number of page(s) 5
Section New Materials and Structural Engineering
DOI https://doi.org/10.1051/matecconf/201927502002
Published online 13 March 2019
  1. Wu Q, Yang FY, Sun GQ, Liu WQ, Wang L (2018). Analytical method for determination of temperature-induced interfacial shear stress in foam-core composite sandwich materials. Plastics, Rubber and Composites, 47(5). pp232-239. [CrossRef] [Google Scholar]
  2. Wang L, Wu ZM, Liu WQ, Wan L (2018). Structural behavior of load-bearing sandwich wall panels with GFRP skins and a foam-web core. Science and Engineering of Composite Materials, 25(1). pp173-188. [CrossRef] [Google Scholar]
  3. Zhang LF, Liu WQ, Sun GQ, Wang L, Li LZ (2018). Two-dimensional Modeling of Thermo-mechanical Responses of Rectangular GFRP Profiles Exposed to Fire. Advances in Materials Science and Engineering, 1705915. [Google Scholar]
  4. Xia YW, Li XP, Peng Y, Lai MH, Wang L (2018). Impact and Post-Impact Performance of Sandwich Wall Boards with GFRP Face Sheets and a Web-Foam Core: The Effects of Impact Location. Materials, 11, 1714. [CrossRef] [Google Scholar]
  5. Wang XK, Ma YL, Liu WQ, Liang RF, Wang L (2018). Mode I interfacial fracture characterization of foam core sandwich materials at elevated temperatures. Journal of Reinforced Plastics and Composites, 36(14). pp1009-1018. [CrossRef] [Google Scholar]
  6. Fang Y, Wang K, Hui D, Xu FJ, Liu WQ, Yang SL, Wang L (2017). Monitoring of seawater immersion degradation in glass fibre reinforced polymer composites using quantum dots. Composites Part B, 112. pp93-102. [CrossRef] [Google Scholar]
  7. Wang L, Fan XM, Chen H, Liu WQ (2016). Axial crush behavior and energy absorption capability of foam-filled GFRP tubes under elevated and high temperature. Composite structures, 149. pp339-350. [CrossRef] [Google Scholar]
  8. Davies JM, Dewhurst DW (1999). The fire performance of GRP pipes inempty and dry, stagnant water filled and flowing water filled conditions. Composites in Fire. Proceedings of the International Conference on the Response of Composite Materials. Newcastle upon Tyne, 1999.pp. 69-84. [Google Scholar]
  9. Keller Thomas, Zhou Aixi, Tracy Craig, Hugi Erich, Schnewlin Peter (2005). Experimental study on the concept of liquid cooling for improving fire resistance of FRP structures for construction. Composites Part A, 36(11). pp 1569-1580. [CrossRef] [Google Scholar]
  10. Keller Thomas, Tracy Craig, Hugi Erich (2006). Fire endurance of loaded and liquid-cooled GFRP slabs for construction. Composites Part A, 37(7).pp 1055-1067. [CrossRef] [Google Scholar]
  11. Tracy Craig (2005).Fire endurance of multicellular panels in an FRP building system. Ph.D. Thesis No. 3235, EPFL-CCLab. [Google Scholar]
  12. Correia JR, Branco FA, Ferreira JG, Bai Yu, Keller Thomas (2010). Fire protection systems for building floors made of pultruded GFRP profiles: Part 1: Experimental investigations. Composites Part B, 41(8). pp 617-629. [CrossRef] [Google Scholar]
  13. Bai Yu, Hugi Erich, Ludwig Carsten, Keller Thomas (2011). Fire performance of water-cooled GFRP columns. I: fire endurance investigation. Journal of Composites for Construction, 15(3). pp 404-412. [CrossRef] [Google Scholar]
  14. Henderson JB, Wiebelt JA, Tant MR (1985). A model for the thermal response of polymer composite materials with experimental verification. Journal of composite materials, 19(6). pp 579-595. [CrossRef] [Google Scholar]
  15. Lattimer B Y, Ouellette J (2006). Properties of composite materials for thermal analysis involving fires. Composites Part A, 37(7). pp1068-1081. [CrossRef] [Google Scholar]
  16. Gibson AG, Wright PNH, Wu Y, Mouritz AP, Mathys Z, Gardiner CP (2003). Modelling residual mechanical properties of polymer composites after fire. Plastics, Rubber and Composites, 32(2). pp 81-90. [CrossRef] [Google Scholar]
  17. Gibson A G, Wright P N H, Wu Y S, Mouritz AP, Mathys Z, Gardiner CP (2004). The integrity of polymer composites during and after fire. Journal of composite materials, 38 (15). pp 1283-1307. [CrossRef] [Google Scholar]
  18. Mouritz AP, Mathys Z (1999). Post-fire mechanical properties of marine polymer composites. Composite Structures, 47(1). pp 643-653. [CrossRef] [Google Scholar]
  19. Gibson AG, Browne TNA, Feih S, Mouritz AP (2012). Modeling composite high temperature behavior and fire response under load. Journal of composite materials, 46(16). pp 2005-2022. [CrossRef] [Google Scholar]
  20. Feih S, Mathys Z, Gibson AG, Mouritz AP (2007). Modelling the compression strength of polymer laminates in fire. Composites Part A, 38(11). pp 2354-2365. [CrossRef] [Google Scholar]
  21. Feih S, Mathys Z, Gibson AG, Mouritz AP (2007). Modelling the tension and compression strengths of polymer laminates in fire. Composites Science and Technology, 67(3). pp 551-564. [CrossRef] [Google Scholar]
  22. Feih S, Mathys Z, Gibson A G, Mouritz AP (2008). Modeling compressive skin failure of sandwich composites in fire. Journal of Sandwich Structures & Materials, 10(3). pp 217-245. [CrossRef] [Google Scholar]
  23. Anjang A, Chevali VS, Kandare E, Mouritz AP, Feih S (2014;). Tension modelling and testing of sandwich composites in fire. CompositeStructures, 113. pp 437-445. [Google Scholar]
  24. Anjang A, Chevali VS, Lattimer BY, Case SW, Feih S, Mouritz AP (2015;). Post-fire mechanical properties of sandwich composite structures. Composite Structures, 132. pp 1019-1028. [CrossRef] [Google Scholar]
  25. Keller Thomas, Tracy Craig, Zhou Aixi (2006).Structural response of liquid-cooled GFRP slabs subjected to fire–Part II: Thermo-chemical and thermo-mechanical modeling. Composites Part A, 37(9).pp 1296-1308. [CrossRef] [Google Scholar]
  26. Bai Yu, Vallée Till, Keller Thomas (2007). Modeling of thermo-physical properties for FRP composites under elevated and high temperature. Composite Science and Technology, 67 (15). pp 3098-3109. [CrossRef] [Google Scholar]
  27. Bai Yu, Vallée Till, Keller Thomas (2008). Modeling of thermal responses for FRP composites under elevated and high temperatures. Composite Science and Technology, 68(1). pp 47-56. [CrossRef] [Google Scholar]
  28. Bai Yu, Keller Thomas, Correia JR, Branco FA, Ferreira JG (2010). Fire protection systems for building floors made of pultruded GFRP profiles–Part 2: Modeling of thermomechanical responses. Composite Part B, 41(8). pp 630-636. [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.