Open Access
Issue
MATEC Web Conf.
Volume 274, 2019
RICON17 - REMINE International Conference Valorization of Mining and other Mineral Wastes into Construction Materials by Alkali-Activation
Article Number 02003
Number of page(s) 6
Section Characterization of AAM, Such as Microstructure and Physical Properties
DOI https://doi.org/10.1051/matecconf/201927402003
Published online 22 February 2019
  1. Szulejko JE, Kumar P, Deep A, Kim KH. Global warming projections to 2100 using simple CO2 greenhouse gas modeling and comments on CO2 climate sensitivity factor. Atmos Pollut Res [Internet]. 2016;1-5. Available from: https://dx.doi.org/10.1016/j.apr.2016.08.002 [Google Scholar]
  2. Eurostat. Waste statistics Main statistical findings -Total waste generation. 2016;(September 2015):3. [Google Scholar]
  3. Castro-Gomes J, Albuquerque A, Silva AP, Cano RP, Suarez JD. Valorização de resíduos de minas em compósitos poliméricos. Mater Construção. 2011;2006(March 2006):40-6. [Google Scholar]
  4. Hebhoub H, Aoun H, Belachia M, Houari H, Ghorbel E. Use of waste marble aggregates in concrete. Constr Build Mater. 2011;25(3):1167-71. [CrossRef] [Google Scholar]
  5. Mun KJ, Choi NW, So SY, Soh YS. Influence of fine tailings on polyester mortar properties. Constr Build Mater. 2007;21(6):1335-41. [CrossRef] [Google Scholar]
  6. Raupp-Pereira F, Ball RJ, Rocha J, Labrincha JA, Allen GC. New waste based clinkers: Belite and lime formulations. Cem Concr Res. 2008;38(4):511-21. [CrossRef] [Google Scholar]
  7. Yellishetty M, Karpe V, Reddy EH, Subhash KN, Ranjith PG. Reuse of iron ore mineral wastes in civil engineering constructions: A case study. Resour Conserv Recycl. 2008;52(11):1283-9. [CrossRef] [Google Scholar]
  8. Castro-Gomes JP, Silva AP, Cano RP, Durán Suarez J, Albuquerque A. Potential for reuse of tungsten mining waste-rock in technical-artistic value added products. J Clean Prod [Internet]. 2012;25:34-41. Available from: https://dx.doi.org/10.1016/j.jclepro.2011.11.064 [CrossRef] [Google Scholar]
  9. Kumar A, Kumar S. Development of paving blocks from synergistic use of red mud and fly ash using geopolymerization. Constr Build Mater [Internet]. 2013;38:865-71. Available from: https://dx.doi.org/10.1016/j.conbuildmat.2012.09.013 [CrossRef] [Google Scholar]
  10. Okada K, Ooyama A, Isobe T, Kameshima Y, Nakajima A, MacKenzie KJD. Water retention properties of porous geopolymers for use in cooling applications. J Eur Ceram Soc. 2009;29(10):1917-23. [CrossRef] [Google Scholar]
  11. Pacheco-Torgal F, Jalali S, Castro Gomes JP. Geopolymers structure, processing, properties and industrial applications. In: Geopolymers Structure, processing, properties and industrial applications. 2009. p. 267-93. [Google Scholar]
  12. Silva I, Castro-Gomes JP, Albuquerque A. Effect of immersion in water partially alkali-activated materials obtained of tungsten mine waste mud. Constr Build Mater [Internet]. 2012;35:117-24. Available from: https://dx.doi.org/10.1016/j.conbuildmat.2012.02.069 [CrossRef] [Google Scholar]
  13. Zhang L, Ahmari S, Zhang J. Synthesis and characterization of fly ash modified mine tailings-based geopolymers. Constr Build Mater [Internet]. 2011;25(9):3773-81. Available from: https://dx.doi.org/10.1016/j.conbuildmat.2011.04.005 [CrossRef] [Google Scholar]
  14. Ding Y, Dai JG, Shi CJ. Mechanical properties of alkali-activated concrete: A state-of-the-art review. Constr Build Mater [Internet]. 2016;127:68-79. Available from: https://dx.doi.org/10.1016/j.conbuildmat.2016.09.121 [CrossRef] [Google Scholar]
  15. Kramar S, Šajna A, Ducman V. Assessment of alkali activated mortars based on different precursors with regard to their suitability for concrete repair. Constr Build Mater [Internet]. 2016;124:937-44. Available from: http://linkinghub.elsevier.com/retrieve/pii/S0950061816312818 [CrossRef] [Google Scholar]
  16. Topcu IB. Alternative estimation of the modulus of elasticity for dam concrete. Cem Concr Res. 2005;35(11):2199-202. [CrossRef] [Google Scholar]
  17. Yildirim H, Sengul O. Modulus of elasticity of substandard and normal concretes. Constr Build Mater. 2011;25(4):1645-52. [CrossRef] [Google Scholar]
  18. Zhou Y, Gao J, Sun Z, Qu W. A fundamental study on compressive strength, static and dynamic elastic moduli of young concrete. Constr Build Mater [Internet]. 2015;98:137-45. Available from: https://dx.doi.org/10.1016/j.conbuildmat.2015.08.110 [CrossRef] [Google Scholar]
  19. American Society for Testing Material. ASTM C 469 - 02: Standard Test Method for Static Modulus of Elasticity and Poisson ' s Ratio of Concrete. West Conshohocken, Pennsylvania, USA; 2002. 1-5 p. [Google Scholar]
  20. EUROPEAN COMMITTEE FOR STANDARDIZATION. EN 12390-13: Testing hardened concrete - Part 13: Determination of secant modulus of elasticity in compression Essai. Brussels; 2013. [Google Scholar]
  21. LNEC LN de EC. E 397-1993 Ec: Determinacao do Modulo de Elasticidade em Compressao. Vol. 3. Lisboa; 1993. 1-2 p. [Google Scholar]
  22. Standard B. Eurocode 2 : Design of concrete structures. Concrete. 2003;(July). [Google Scholar]
  23. Górski M, Krzywoń R, Safuta M, Paszek N, Dawczyński S, Pizoń J. Badania cech materiałowych geopolimerów z odpadowych kruszyw pokopalnianych i ich symulacje numeryczne. Mater Bud [Internet]. 2016 Aug 5 [cited 2017 Jul 28];1(8):91-3. Available from: http://sigma-not.pl/publikacja-100246-2016-8.html [Google Scholar]
  24. Pacheco-Torgal F, Castro-Gomes JP, Jalali S. Investigations of tungsten mine waste geopolymeric binder: Strength and microstructure. Constr Build Mater. 2008;22(11):2212-9. [CrossRef] [Google Scholar]
  25. ACI ACI. Building code requirements for structural concrete (ACI 318-95). Farmington Hills; 1995. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.