EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 262 (2019) MATEC Web Conf., 262 (2019) 05002 References
Open Access
Issue
MATEC Web Conf.
Volume 262, 2019
64 Scientific Conference of the Committee for Civil Engineering of the Polish Academy of Sciences and the Science Committee of the Polish Association of Civil Engineers (PZITB) (KRYNICA 2018)
Article Number 05002
Number of page(s) 7
Section Transportation Engineering
DOI https://doi.org/10.1051/matecconf/201926205002
Published online 30 January 2019
  1. D.C. Saha, J.N. Mandal, Laboratory Investigations on Reclaimed Asphalt Pavement (RAP) for using it as Base Course of Flexible Pavement, Procedia Engineering, 189, pp. 434–439, (2017). [CrossRef] [Google Scholar]
  2. B. Świeczko-Żurek, P. Jaskuła, J.A. Ejsmont, A. Kędzierska, P. Czajkowski, Rolling resistance and tyre/road noise on rubberised asphalt pavement in Poland, Road Materials and Pavement Design, 18(1), pp.151–167, (2017). doi.org/10.1080/14680629.2016.1159245 [Google Scholar]
  3. A. Chomicz-Kowalska, W. Gardziejczyk, M.M. Iwański, Moisture resistance and compactibility of asphalt concrete produced in half-warm mix asphalt technology with foamed bitumen. Constr. Build. Mater. 126 pp. 108–118. (2016). doi.org/10.1016/j.conbuildmat.2016.09.004 [CrossRef] [Google Scholar]
  4. M. Dinis-Almeida, J. Castro-Gomes, C. Sangiorgi, S.E. Zoorob, M. Lopes Afonso, Performance of Warm Mix Recycled Asphalt containing up to 100% RAP. Constr. Build. Mater. 112, pp. 1–6, (2016). doi.org/10.1016/j.conbuildmat.2016.02.108 [CrossRef] [Google Scholar]
  5. S. Li, F. Yang, Z. Liu, A new structure for continuously reinforced concrete pavement with road performance evaluation. Constr. Build. Mater. 157 pp. 1047–1052, (2017). doi.org/10.1016/j.conbuildmat.2017.09.087 [CrossRef] [Google Scholar]
  6. J. Piłat, P. Radziszewski, Nawierzchnie asfaltowe. WKŁ, Warszawa, 2010. (in Polish) [Google Scholar]
  7. J. Judycki, P. Jaskuła, M. Pszczoła, J. Alenowicz, B. Dołżycki, M. Jaczewski, D. Ryś, M. Stienss, Catalogue of typical flexible and semi-rigid pavements. Gdańsk University of Technology, Poland (in Polish) (General Directorate for National Roads and Motorways) (in Polish) (2014). [Google Scholar]
  8. A. Szydło, P. Mackiewicz, R. Wardęga, B. Krawczyk. Catalogue of typical rigit pavements. Wrocław University of Technology, Poland (in Polish) (General Directorate for National Roads and Motorways) (in Polish) (2014). [Google Scholar]
  9. K. Kowalski, J. Król, W. Bańkowski, P. Radziszewski, M. Sarnowski, 2017 Thermal and Fatigue Evaluation of Asphalt Mixtures Containing RAP Treated with a Bio-Agent. Applied Sciences, 7(3):216, p. 1–11, (2017). doi:10.3390/app7030216 [CrossRef] [Google Scholar]
  10. W. Bańkowski, D. Sybilski, J. Król, K. Kowalski, P. Radziszewski, P. Skorek, Wykorzystanie destruktu asfaltowego – konieczność i innowacja, Budownictwo i Architektura 15(1), pp.157–167. (in Polish) (2016). [Google Scholar]
  11. R. Izaksa, V. Haritonovs, I. Klasa, M. Zaumanis, Hot Mix Asphalt With High RAP Content. Procedia Engineering 114 pp. 676 – 684, (2015). doi.org/10.1016/j.proeng.2015.08.009 [CrossRef] [Google Scholar]
  12. M. Iwański, P. Buczyński, G. Mazurek, The use of gabbro dust in the cold recycling of bitumen paving mixes with foamed bitumen. Bulletin of the Polish Academy of Sciences Technical Sciences 64(4) pp. 763–773, (2016). doi.org/10.1515/bpasts-2016-0085 [Google Scholar]
  13. M. Iwański, A. Chomicz-Kowalska, Application of the foamed bitumen and bitumen emulsion to the road base mixes in the deep cold recycling technology. The Baltic Journal of Road and Bridge Engineering 11(4), p. 291–301, (2016). http://dx.doi.org/10.3846/bjrbe.2016.34 [CrossRef] [Google Scholar]
  14. B. Dołżycki, M. Jaczewski, C. Szydłowski, The long-term properties of mineral-cement-emulsion mixtures, Constr. Build. Mater. 156 pp 799–808, (2017). doi.org/10.1016/j.conbuildmat.2017.09.032 [CrossRef] [Google Scholar]
  15. V. Letelier, E. Tarela, P. Muñoz, G. Moriconi, Combined effects of recycled hydrated cement and recycled aggregates on the mechanical properties of concrete. Constr. Build. Mater. 132, pp. 365–375 (2017). doi.org/10.1016/j.conbuildmat.2016.12.010 [CrossRef] [Google Scholar]
  16. C. Thomas, J. Setién, J.A. Polanco, P. Alaejos, M. Sánchez de Juan, Durability of recycled aggregate concrete. Constr. Build. Mater. 40, pp. 1054–1065, (2013). doi.org/10.1016/j.conbuildmat.2012.11.106 [CrossRef] [Google Scholar]
  17. L. Evangelista, J. de Brito, Durability performance of concrete made with fine recycled concrete aggregates. Cement and Concrete Composites, 32(1), pp. 9–14, (2010). doi.org/10.1016/j.cemconcomp.2009.09.005 [Google Scholar]
  18. M. J. McGinnis, M. D. Andres de la Rosa, B. D. Weldon, Y. C. Kurama, Strength and stiffness of concrete with recycled concrete aggregates. Constr. Build. Mater. 154, pp. 258–269, (2017). doi.org/10.1016/j.conbuildmat.2017.07.015 [CrossRef] [Google Scholar]
  19. Ahmed Ebrahim Abu El-Maaty Behiry, Utilization of cement treated recycled concrete aggregates as base or subbase layer in Egypt, Ain Shams Engineering Journal 4(4) pp. 661–673, (2013). doi.org/10.1016/j.asej.2013.02.005 [CrossRef] [Google Scholar]
  20. M. Iwański, A. Chomicz-Kowalska, Application of recycled aggregates to the road base mixtures with foamed bitumen in the cold recycling technology. International Conference on Environmental Engineering (ICEE) 155, pp.1–8, (2014). doi.org/10.3846/enviro.2014.155 [Google Scholar]
  21. N.I.Md. Yusoff, G.D. Airey, M.R. Hainin, Predictability of Complex Modulus Using Rheological Models. Asian Journal of Scientific Research 3 pp.18–30, (2010). http://dx.doi.org/10.3923/ajsr.2010.18.30 [CrossRef] [Google Scholar]
  22. C. Godenzoni, A. Graziani, D. Perraton, Complex modulus characterisation of coldrecycled mixtures with foamed bitumen and different contents of reclaimed bitumen. Road Materials and Pavement Design 18(1) pp.130–150, (2017). doi.org/10.1080/14680629.2016.1142467 [CrossRef] [Google Scholar]
  23. EN 12697-26 Bituminous mixtures. Test methods for hot mix asphalt. Stiffness. [Google Scholar]
  24. Wirtgen Cold Recycling Technology (1rd ed.). Windhagen: Wirtgen GmbH. (2012). [Google Scholar]
  25. OST D-04.10.01a, “The detailed technical specifications: The road base of the mineral-cement with foamed bitumen mixture made in cold recycling technology”. Warsaw, GDDKiA. (2013). (in Polish) [Google Scholar]
  26. EN-12697-31 Bituminous mixtures. Test methods for hot mix asphalt. Specimen preparation by gyratory compactom [Google Scholar]
  27. A. Grilli, A. Graziani, M. Bocci, Compactability and thermal sensitivity of cement-Bitumen treated materials. Road Materials and Pavement Design, 13(4) pp. 599–617, (2012). https://doi.org/10.1080/14680629.2012.742624 [CrossRef] [Google Scholar]
  28. B. Dołżycki, M. Jaczewski, C. Szydłowski, The long-term properties of mineral-cement-emulsion mixtures. Constr. Build. Mater. 156, pp. 799 – 808, (2017). doi.org/10.1016/j.conbuildmat.2017.09.032 [CrossRef] [Google Scholar]
  29. G.M Rowe, M.J. Sharrock, Alternate Shift Factor Relationship for Describing the Temperature Dependency of the Visco-Elastic Behaviour of Asphalt Materials. Transportation Research Record, 2207, p. 125–135, (2011). [CrossRef] [Google Scholar]
  30. M.W. Witczak, R.E. Root, Summary of Complex Modulus Laboratory Test Procedures and Results. STP 561, American Society for Testing and Materials, pp. 67–94, (1976). [Google Scholar]
  31. N.I.Md Yusoff, G.D. Airey M.R. Hainin, Predictability of Complex Modulus Using Rheological Models. Asian Journal of Scientific Research 3, p. 18–30, (2010). [CrossRef] [Google Scholar]
  32. G. Mazurek, M. Iwański, Modelling of Asphalt Concrete Stiffness in the Linear Viscoelastic Region. IOP Publishing. IOP Conf. Ser.: Materials Science and Engineering 245:032029, pp. 1–10, (2017). doi:10.1088/1757-899X/245/3/032029. [Google Scholar]
  33. A.C. Pronk, M. Gajewski, W. Bańkowski, Processing of four point bending test results for visco-elasticity and fatigue models. International Journal of Pavement Engineering pp. 1–5, (2017). doi.org/10.1080/10298436.2017.1398549 [CrossRef] [Google Scholar]
  34. J. Król, K. Kowalski, P. Radziszewski, Rheological behavior of n-alkane modified bitumen in aspect of Warm Mix Asphalt technology, Constr. Build. Mater. 93, pp.703–710, (2015). DOI:10.1016/j.conbuildmat.2015.06.033. [CrossRef] [Google Scholar]
  35. G. Mazurek, M. Iwański, Relaxation Modulus of SMA with Polymer Modified and Highly Polymer Modified Bitumen, Procedia Engineering 172, pp. 731–738, (2017). doi.org/10.1016/j.proeng.2017.02.093. [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.