Open Access
| Issue |
MATEC Web Conf.
Volume 254, 2019
XXIII Polish-Slovak Scientific Conference on Machine Modelling and Simulations (MMS 2018)
|
|
|---|---|---|
| Article Number | 02004 | |
| Number of page(s) | 6 | |
| Section | Modelling and Simulation, Structural Optimization | |
| DOI | https://doi.org/10.1051/matecconf/201925402004 | |
| Published online | 15 January 2019 | |
- H. Sungkon, Fatigue analysis of drillstring threaded connections, Proceedings of The Thirteenth International Offshore and Polar Engineering Conference Honolulu,Hawaii, USA, May 25-30, pp.202-208, (2003). [Google Scholar]
- L. Jakubovičová, M. Sága, M. Vaško, Numerical study of influence of mutual slewigof roller bearing rings on the principal stresses at contact area. Scientific journalof Silesian University of Technology – Series Transport 84, 83-91 (2014) [Google Scholar]
- P. Kopas, M. Blatnický, M. Sága, M. Vaško, Identification of mechanical propertiesof weld joints of AlMgSi07.F25 aluminium alloy. Metalurgija 56 (1-2), 99-102 (2017) [Google Scholar]
- A. Sapietová, M. Sága, I. Kuric et al., Application of optimization algorithms for robotsystems designing. International Journal of Advanced Robotic Systems 15/1 (2018) [Google Scholar]
- V. Baniari, M. Blatnická, M. Šajgalík, M. Vaško, M. Sága, Measurement and numericalanalyses of residual stress distribution near weld joint. Procedia Engineering 192, 22-27 (2017) [CrossRef] [Google Scholar]
- P. Kopas, M. Sága, V. Baniari, M. Vaško, M. Handrik, A plastic strain and stressanalysis of bending and torsion fatigue specimens in the low-cycle fatigue region usingthe finite element methods. Procedia Engineering 177, 526-531 (2017) [CrossRef] [Google Scholar]
- M. Handrik, P. Kopas, V. Baniari, M. Vaško, M. Sága, Analysis of stress and strainof fatigue specimens localised in the cross-sectional area of the gauge section testingon bi-axial fatigue machine loaded in the high-cycle fatigue region. Procedia Engineering 177, 516-519 (2017) [CrossRef] [Google Scholar]
- P. Pecháč, M. Sága, Controlling of local search methods’ parameters in memeticalgorithms using the principles of simulated annealing. Proc. Eng. 136, 70-76 (2016) [CrossRef] [Google Scholar]
- L. Jakubovičová, M. Sága, Computational analysis of contact stress distributionin the case of mutual stewing of roller bearing rings. Novel Trends in ProductionDevices and Systems, Applied Mechanics and Materials 474, 363-368 (2014) [CrossRef] [Google Scholar]
- I. Hren, P. Hejma, Š. Michna, M. Svoboda, J. Soukup, Analysis of torque cam mechanism.MATEC Web of Conferences 157, 06004 (2018) [CrossRef] [EDP Sciences] [Google Scholar]
- A. Sapietová, L. Gajdoš, V. Dekýš, M. Sapieta, Analysis of the influence of input functioncontact Parameters of the impact force Process in the MSC. ADAMS. Advances in Intelligent Systems and Computing 393, pp. 243-253 (2016) [CrossRef] [Google Scholar]
- A. Sapietová, J. Bukovan, M. Sapieta, L. Jakubovičová, Analysis and Implementationof Input Load Effects on an Air Compressor Piston in MSC.ADAMS. Procedia Engineering 177, pp. 554-561 (2017) [CrossRef] [Google Scholar]
- T. Domański, A. Sapietová, M. Sága, Application of Abaqus Software for the Modelingof Surface Progressive Hardening. Procedia Engineering 177, pp. 64-69 (2017) [CrossRef] [Google Scholar]
- J. Flizikowski, M. Macko, J. Czerniak, A. Mroziński, Implementation of geneticalgorithms into development of mechatronic multi-edge’s grinder design. ASME 2011International Mechanical Engineering Congress and Exposition, IMECE. (2011) [Google Scholar]
- M. Macko, J. Flizikowski, The method of the selection of comminution design for non-brittle materials. Conference Proceedings AIChE, (The American Institute of ChemicalEngineers) Annual Meeting in Salt Lake City session: Comminution Experiments,Theory & Modeling. (2010). [Google Scholar]
- M. Dudziak, A. Kołodziej, G. Domek, K. Talaśka, Multi-angularity identificationof parameters and compatibility conditions of the axisymmetric connection with formdeviations. Procedia Engineering, Vol. 177, pp. 431-438 (2017) [CrossRef] [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.