Open Access
MATEC Web Conf.
Volume 254, 2019
XXIII Polish-Slovak Scientific Conference on Machine Modelling and Simulations (MMS 2018)
Article Number 02001
Number of page(s) 9
Section Modelling and Simulation, Structural Optimization
Published online 15 January 2019
  1. D. Wojtkowiak, K. Talaśka, I. Malujda, G. Domek, Analysis of the influence of the cutting edge geometry on parameters of the perforation process for conveyor and transmission belts. MATEC Web of Conferences 157, 01022 (2018) [CrossRef] [EDP Sciences] [Google Scholar]
  2. D. Wojtkowiak, K. Talaśka, I. Malujda, G. Domek, Estimation of the perforation force for polymer composite conveyor belts taking into consideration the shape of the piercing punch. The International Journal of Advanced Manufacturing Technology 98, 9-12, 2539-2561 (2018) [CrossRef] [Google Scholar]
  3. D. Wojtkowiak, K. Talaśka, I. Malujda, G. Domek, Vacuum conveyor belts perforation – methods, materials and problems, Mechanik 12/2017, 1138-1142 (2017) [CrossRef] [Google Scholar]
  4. K. Talaśka, D. Wojtkowiak, Modelling a mechanical properties of the multilayer composite materials with the polyamide core. MATEC Web of Conferences 157, 02052 (2018) [CrossRef] [EDP Sciences] [Google Scholar]
  5. G. Domek, A. Kołodziej, Design of the tendon structure in timing belts, Procedia Engineering 136, 365-369 (2016) [CrossRef] [Google Scholar]
  6. K. Wałęsa, I. Malujda, K. Talaśka, Butt welding of round drive belts. Acta Mechanica et Automatica 12 (2), 115-126 (2018) [CrossRef] [Google Scholar]
  7. Nitta Industries website –, (Access date: 06.08.2018) [Google Scholar]
  8. Wilhelm Her M. Müller, Nitta Industries – polish catalog, In: (Access date: 06.08.2018) [Google Scholar]
  9. D. Wilczyński, K. Talaśka, I. Malujda, P. Jankowiak, Experimental research on biomass cutting process. MATEC Web of Conferences 157, 07016 (2018) [CrossRef] [EDP Sciences] [Google Scholar]
  10. K. Talaśka, I. Malujda, D. Wilczyński, Agglomeration of natural fibrous materials in perpetual screw technique – a challenge for designer. Procedia Engineering, Vol. 136, 63-69 (2016) [CrossRef] [Google Scholar]
  11. D. Wilczyński, I. Malujda, K. Talaśka, R. Długi, The study of mechanical properties of natural polymers in the compacting process. Procedia Engineering, Vol. 177, 411-418 (2017) [CrossRef] [Google Scholar]
  12. J. Górecki, I. Malujda, K. Talaśka, M. Kukla, P. Tarkowski, Influence of the Value of Limit Densification Stress on the Quality of the Pellets During the Agglomeration Process of CO2. Procedia Engineering 136, 269-274 (2016) [CrossRef] [Google Scholar]
  13. J. Górecki, I. Malujda, K. Talaśka, Investigation of Internal Friction of Agglomerated Dry Ice. Procedia Engineering 136, 275-279 (2016) [CrossRef] [Google Scholar]
  14. J. Górecki, I. Malujda, K. Talaśka, D. Wojtkowiak, Dry ice compaction in piston extrusion process. Acta Mechanica et Automatica 11, 4, 313-316 (2017) [CrossRef] [Google Scholar]
  15. I. Malujda, D. Wilczyński, Mechanical Properties Investigation of Natural Polymers. Procedia Engineering Vol. 136, 263-268 (2016) [CrossRef] [Google Scholar]
  16. A. Kocanda, P. Czyżewski, Numerical analysis of abrasive wear of forging dies. In: K. Mori, Simulation of Material Processing: Theory, Methods and Applications, 421-424 (2001) [Google Scholar]
  17. R. Dyja, E. Gawronska, A. Grosser, P. Jeruszka, N. Sczygiol, Estimate the Impact of Different Heat Capacity Approximation Methods on the Numerical Results During Computer Simulation of Solidification. Engineering Letters 24, 2, 1-14 (2015) [Google Scholar]
  18. M. Dudziak, G. Domek, A. Kołodziej, K. Talaśka, Contact Problems Between the Hub and the Shaft with a Three-angular Shape of Cross-section for Different Angular Positions. Procedia Engineering 96, 50-58 (2014) [CrossRef] [Google Scholar]
  19. M. Žmindák, Z. Pelagića, P. Pastoreka, M. Močilana, M. Vybošťoka, Finite element modelling of high velocity impact on plate structures. Procedia Engineering 136, 162-168 (2016) [CrossRef] [Google Scholar]
  20. T. Domański, A. Sapietová, M. Sága, Application of Abaqus software for the modeling of surface progressive hardening. Procedia Engineering 177, 64-69 (2017) [CrossRef] [Google Scholar]
  21. M. Dudziak, A. Kołodziej, G. Domek, K. Talaśka, Multi-angularity identification of parameters and compatibility conditions of the axisymmetric connection with form deviations. Procedia Engineering 177, 431-438 (2017) [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.