Open Access
Issue |
MATEC Web Conf.
Volume 220, 2018
2018 The 2nd International Conference on Mechanical, System and Control Engineering (ICMSC 2018)
|
|
---|---|---|
Article Number | 01003 | |
Number of page(s) | 6 | |
Section | Functional Material Design and Modeling | |
DOI | https://doi.org/10.1051/matecconf/201822001003 | |
Published online | 29 October 2018 |
- A. Kocanda, H. Sadlowska, Automotive component development by means of hydroforming: a review, Arch Civ Mech Eng 8, (3) 55-72 (2008). [CrossRef] [Google Scholar]
- S.M. Kulkarni, V.V. Ruiwale, M.S. Jadhao, A.A. Kadam, S.R. Kale, A review on Hydroforming Processes, International Journal of Current Engineering and Technology 160-163 (2017). [Google Scholar]
- L.H. Lang, Z.R. Wang, D.C. Kang, S.J. Yuan, S.H. Zhang, J. Danckert, K.B. Nielsen, Hydroforming highlights: sheet hydroforming and tube hydroforming, J Mater Process Tech 151, (1-3) 165-177 (2004). [Google Scholar]
- Q. Wang, Hydromechanical deep-drawing, New Technol. New Process. 5, 23–34 (1994). [Google Scholar]
- S.H. Zhang, Z.R. Wang, Y. Xu, Z.T. Wang, L.X. Zhou, Recent developments in sheet hydroforming technology, J Mater Process Tech 151, (1-3) 237-241 (2004). [CrossRef] [Google Scholar]
- S.S. Kim, C.S. Han, Y.S. Lee, Development of a new burr-free hydro-mechanical punching, J Mater Process Tech 162, 524-529 (2005). [Google Scholar]
- M. Uchida, M. Kojima, Hydropiercing of Tube Wall in Hydroforming, International conference; 7th, Technology of plasticity, Advanced Technology of Plasticity, Yokohama, Japan, 2002, pp. 1483-1488. [Google Scholar]
- M. Shiomi, Y. Ueda, K. Osakada, Piercing of steel sheet by using hydrostatic pressure, Cirp Ann-Manuf Techn 55, (1) 255-258 (2006). [CrossRef] [Google Scholar]
- Z.G. Wu, S.H. Li, W.G. Zhang, W.R. Wang, Ductile fracture simulation of hydropiercing process based on various criteria in 3D modeling, Mater Design 31, (8) 3661-3671 (2010). [CrossRef] [Google Scholar]
- C.M. G., L.D. J., Ductility and the Workability of Metals, Journal of the Institute of Metals 96, 33–39 (1968). [Google Scholar]
- S.E. Clift, P. Hartley, C.E.N. Sturgess, G.W. Rowe, Fracture Prediction in Plastic-Deformation Processes, Int J Mech Sci 32, (1) 1-17 (1990). [CrossRef] [Google Scholar]
- H. P, P. I, S. C., Numerical Modelling of Material Deformation Processes Research, Development and Applications, Springer, Berlin, 1992. [Google Scholar]
- R. Hambli, M. Reszka, Fracture criteria identification using an inverse technique method and blanking experiment, Int J Mech Sci 44, (7) 1349-1361 (2002). [CrossRef] [Google Scholar]
- R. J.R., T. D.M., On the ductile enlargement of voids in triaxial stress fields, Journal of the Mechanics and Physics of Solids 17, (3) 201-217 (1969). [CrossRef] [Google Scholar]
- A. Hassannejadasl, D.E. Green, W.J. Altenhof, C. Maris, M. Mason, Numerical modeling of multi-stage tube hydropiercing, Mater Design 46, 235-246 (2013). [CrossRef] [Google Scholar]
- G.H. Majzoobi, F.R. Dehgolan, Determination of the constants of damage models, Procedia Engineer 10, (2011). [Google Scholar]
- M. Feucht, D.-Z. Sun, T. Enhart, T. Frank, Recent development and applications of the Gurson model, LS-DYNA Anwenderforum D II, 21-32 (2006). [Google Scholar]
- W. Liu, J. Hao, G. Liu, G.L. Gao, S.J. Yuan, Influence of punch shape on geometrical profile and quality of hole piercing-flanging under high pressure, Int J Adv Manuf Tech 86, (5-8) 1253-1262 (2016). [CrossRef] [Google Scholar]
- D. Anderson, S. Winkler, A. Bardelcik, M.J. Worswick, Influence of stress triaxiality and strain rate on the failure behavior of a dual-phase DP780 steel, Mater Design 60, 198-207 (2014). [CrossRef] [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.