Open Access
MATEC Web Conf.
Volume 213, 2018
2018 6th Asia Conference on Mechanical and Materials Engineering (ACMME 2018)
Article Number 01013
Number of page(s) 4
Section Mechanical Manufacturing and Automation
Published online 15 October 2018
  1. ASTM Standard F2792-12a. (2012). Standard Terminology for Additive Manufacturing Technologies. ASTM International, West Conshohocken, PA. [Google Scholar]
  2. Lee, J.-Y., J. An and C. K. Chua. (2017).Fundamentals and applications of 3D printing for novel materials. Applied Materials Today 7(Supplement C): 120–133. [CrossRef] [Google Scholar]
  3. J. Benbow and J. Bridgwater. (1993). Paste flow and extrusion. Oxford series on advanced manufacturing, Oxford. [Google Scholar]
  4. Amza, C., A. Zapciu and D. Popescu (2017). Paste Extruder-Hardware Add-On for Desktop 3D Printers. Technologies 5(3): 50. [CrossRef] [Google Scholar]
  5. Li, W., A. Ghazanfari, M. C. Leu and R. G. Landers., (2017). Extrusion-on-demand methods for high solids loading ceramic paste in freeform extrusion fabrication. Virtual and Physical Prototyping 12(3): 193–205 [CrossRef] [Google Scholar]
  6. Rough, S. L., J. Bridgwater and D. I. Wilson., (2000). Effects of liquid phase migration on extrusion of microcrystalline cellulose pastes. International Journal of Pharmaceutics 204(1): 117–126. [CrossRef] [Google Scholar]
  7. Jianping, L. and G. Deng., (2004). Technology development and basic theory study of fluid dispensing a review. [Google Scholar]
  8. S. Mason, M., T. Huang, R. G. Landers, M. Leu, G. Hilmas and M. W. Hayes., (2007). Aqueous-Based Extrusion Fabrication of Ceramics on Demand. [Google Scholar]
  9. Liu, H. and M. C. Leu., (2009). Liquid Phase Migration In Extrusion Of Aqueous Alumina Paste For Freeze-Form Extrusion Fabrication. International Journal of Modern Physics B 23(06n07): 1861–1866. [CrossRef] [Google Scholar]
  10. Oakes, T., P. Kulkarni, R. G Landers and M. Leu., (2009). Development of extrusion-on-demand for ceramic Freeze-form Extrusion Fabrication. [Google Scholar]
  11. Liu, H., J. Liu, M. C. Leu, R. Landers and T. Huang (2013). Factors influencing paste extrusion pressure and liquid content of extrudate in freeze-form extrusion fabrication. The International Journal of Advanced Manufacturing Technology 67(1): 899–906. [CrossRef] [Google Scholar]
  12. Hong, S., C. Sanchez, H. Du and N. Kim., (2015). Fabrication of 3D Printed Metal Structures by Use of High-Viscosity Cu Paste and a Screw Extruder. Journal of Electronic Materials 44(3): 836–841. [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.