Open Access
Issue |
MATEC Web Conf.
Volume 201, 2018
2017 The 3rd International Conference on Inventions (ICI 2017)
|
|
---|---|---|
Article Number | 01001 | |
Number of page(s) | 9 | |
Section | Invention of mechanical system | |
DOI | https://doi.org/10.1051/matecconf/201820101001 | |
Published online | 14 September 2018 |
- T.J. Ko, H.S. Kim, Mechanistic cutting force model in band sawing, Int. J. Mach. Tool. & Manu., 39, 8,118-119 (1999) [Google Scholar]
- C. Andersson, M.T Andersson, J.-E Ståhl, Bandsawing. Part I: cutting force model including effects of positional errors, tool dynamics and wear, Int. J. Mach. Tool. & Manu., 41, 227-236 (2001) [CrossRef] [Google Scholar]
- C. Andersson, J.-E S.H. Hellbergh, Bandsawing. Part II: detecting positional errors, tool dynamics and wear by cutting force measurement, Int. J. Mach. Tool. & Manu., 41, 237-253 (2001) [CrossRef] [Google Scholar]
- C. Andersson, Bandsawing. Part III: stress analysis of saw tooth microgeometry, Int. J. Mach. Tool. & Manu., 41, 255-263 (2001) [CrossRef] [Google Scholar]
- T.D. Marusich, E. Askari, Modeling Residual Stress and Workpiece Quality in Machined Surfaces, Proceedings of the 4th CIRP International Workshop on Modelling of Machining Operations, Delft, The Netherlands, 105-109 (2001) [Google Scholar]
- X. Xu, Y. Yu, Sawing performance of diamond with alloy coatings, Surf. & Coat. Tech., 198, 459-463 (2005) [CrossRef] [Google Scholar]
- R. Okai, S.J. Mitchual, K. Frimpong-Mensah, Optimization techniques for minimizing saw teeth deflection and lumber thickness variation, Prec. Eng., 30, 1, 39-46 (2006) [CrossRef] [Google Scholar]
- I.S. Buyuksagis, Effect of Cutting Mode on the Sawability of Granites Using Segmented Circular Diamond Sawblade, Int. J. Mach. Tool. & Manu., 183, 399-406 (2007) [Google Scholar]
- Sung-Hua Wu, J.-J. Junz Wang, R. S. Lee, Chip fractal geometry and loading characteristics of sinusoidal multi-cutters in hack-sawing process, Int. J. Mach. Tool. & Manu., 111, 68. Corrigendum (2016) [CrossRef] [Google Scholar]
- T. Thaler, P. Potocnik, I. Bric, E. Govekar, Chatter detection in band sawing based on discriminant analysis of sound features, Appl. Acou., 77,114-121 (2014) [CrossRef] [Google Scholar]
- T. Thaler, B. Krese, E. Govekar, Stability diagrams and chatter avoidance in horizontal band sawing, CIRP Anna.-Manu. Tech., 64, 81-84 (2015) [CrossRef] [Google Scholar]
- T.G. Kumbera, J.A. Patten, H.P. Cherukuri, C.J. Brand, T.D. Marusich, Numerical simulations of ductile machining of silicon nitride with a cutting tool of defined geometry, Int. J. Mach. Tool. & Manu., 5, 341-352 (2001) [Google Scholar]
- T.D. Marusich, J.D. Thiele, C.J. Brand, Simulation and analysis of chip breakage in turning processes, Technical Paper Presented in Caterpillar Inc, 1-10 (2001) [Google Scholar]
- W. Grzesik, M. Bartoszuk, P. Nieslony, Finite element modelling of temperature distribution in the cutting zone in turning processes with differently coated tools, J. Mate. Proc. Tech., 1204-1211 (2005) [Google Scholar]
- G. Fang, P. Zeng, Three-dimensional thermo-elastic-plastic coupled FEM simulations for metal oblique cutting processes, J. Mate. Proc. Tech., 168, 1, 42-48 (2005) [CrossRef] [Google Scholar]
- T.D. Marusich, S. Usui, S. Lankalapalli, N. Saini, L. Zamorano, A. Grevstad, Residual Stress Prediction for Part Distortion Modeling, Copyright SAE International (2006) [Google Scholar]
- T.D. Marusich, S. Usui, J. Ma, D.A. Stephenson, A. Shih, Finite Element Modeling of Drilling Processes with Solid and Indexable Tooling in Metals and Stack-ups (2007) [Google Scholar]
- M. Mohammadpour, M.R. Razfar R. Jalili Saffar, Numerical investigating the effect of machining parameters on residual stresses in orthogonal cutting, Simu. Mode. Prac. & Theo., 18, 3,378-389 (2010) [Google Scholar]
- K. Huang, W. Yang, Analytical model of temperature field in workpiece machined surface layer in orthogonal cutting, J. Mate. Proc. Tech., 229, 375-389 (2016) [CrossRef] [Google Scholar]
- B.B. Mandelbort, The fractal geometry of nature, W.H. Freeman, New York (1982) [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.