Open Access
MATEC Web Conf.
Volume 197, 2018
The 3rd Annual Applied Science and Engineering Conference (AASEC 2018)
Article Number 08007
Number of page(s) 5
Section Mechanical Engineering
Published online 12 September 2018
  1. C. Luca, “Modeling and optimization of biomass gasification systems,” no. May, (2009) [Google Scholar]
  2. R. Alipour Moghadam, S. Yusup, W. Azlina, S. Nehzati, and A. Tavasoli, “Investigation on syngas production via biomass conversion through the integration of pyrolysis and air-steam gasification processes,” Energy Convers. Manag., vol. 87, pp. 670-675, (2014) [CrossRef] [Google Scholar]
  3. R. A. Moghadam, S. Yusup, Y. Uemura, B. L. F. Chin, H. L. Lam, and A. Al Shoaibi, “Syngas production from palm kernel shell and polyethylene waste blend in fluidized bed catalytic steam co-gasification process,” Energy, vol. 75, pp. 40-44, (2014) [CrossRef] [Google Scholar]
  4. T. M. Ismail and M. A. El-Salam, “Parametric studies on biomass gasification process on updraft gasifier high temperature air gasification,” Appl. Therm. Eng., vol. 112, pp. 1460-1473, (2017) [CrossRef] [Google Scholar]
  5. T. Golden, B. Reed, and A. Das, Handbook of Biomass Downdraft Gasifier Engine Systems, no. March. (1988) [Google Scholar]
  6. Z. S. Liu, C. L. Lin, T. J. Chang, and W. C. Weng, “Waste-gasification efficiency of a two-stage fluidized-bed gasification system,” Waste Manag., vol. 48, pp. 250-256, (2016) [CrossRef] [Google Scholar]
  7. L. Ding et al., “Development of an ultra-small biomass gasification and power generation system: Part 2. Gasification characteristics of carbonized pellets/briquettes in a pilot-scale updraft fixed bed gasifier,” Fuel, vol. 220, no. January, pp. 210-219, (2018) [CrossRef] [Google Scholar]
  8. D. T. Pedroso, E. B. Machín, J. L. Silveira, and Y. Nemoto, “Experimental study of bottom feed updraft gasifier,” Renew. Energy, vol. 57, pp. 311-316, (2013) [CrossRef] [Google Scholar]
  9. T. M. Ismail and M. A. El-Salam, “Numerical and experimental studies on updraft gasifier HTAG,” Renew. Energy, vol. 78, pp. 484-497, (2015) [CrossRef] [Google Scholar]
  10. H. Saputro et al., “The CFD Simulation of Cyclone Separator without and with the Counter-cone in the Gasification Process,” IOP Conf. Ser. Mater. Sci. Eng., (2018) [Google Scholar]
  11. L. Wang, C. L. Weller, D. D. Jones, and M. A. Hanna, “Contemporary issues in thermal gasification of biomass and its application to electricity and fuel production,” Biomass and Bioenergy, vol. 32, no. 7, pp. 573-581, (2008) [CrossRef] [Google Scholar]
  12. A. Saravanakumar, T. M. Haridasan, T. B. Reed, and R. K. Bai, “Experimental investigation and modelling study of long stick wood gasification in a top lit updraft fixed bed gasifier,” Fuel, vol. 86, no. 17-18, pp. 2846-2856, (2007) [CrossRef] [Google Scholar]
  13. [A. T. Mustafa, “Experimental Study of Air Flow Rate Effect On Humidification Parameters With Preheating And Dehumidification Process Changing,” J. Eng. Appl. Sci., vol. 6, no. 9, pp. 63-68, (2011) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.