Open Access
MATEC Web Conf.
Volume 192, 2018
The 4th International Conference on Engineering, Applied Sciences and Technology (ICEAST 2018) “Exploring Innovative Solutions for Smart Society”
Article Number 02018
Number of page(s) 4
Section Track 2: Mechanical, Mechatronics and Civil Engineering
Published online 14 August 2018
  1. P. Sarker, M. Begum, and S. Nasrin, "Fibre reinforced polymers for structural retrofitting: A review," J Civil Eng, vol. 39, no. 1, pp. 49-57, 2011. [Google Scholar]
  2. U. Tamilarasan, L. Karunamoorthy, and K. Palanikumar, "Mechanical Properties Evaluation of the Carbon Fibre Reinforced Aluminium Sandwich Composites," Materials Research, vol. 18, no. 5, pp. 1029-1037, 2015. [CrossRef] [Google Scholar]
  3. J. Wang et al., "Bond strength between carbon fiber– reinforced plastic tubes and aluminum joints for racing car suspension," Advances in Mechanical Engineering, vol. 8, no. 10, p. 1687814016674627, 2016. [Google Scholar]
  4. M. Kamruzzaman, M. Z. Jumaat, N. Ramli Sulong, and A. Islam, "A review on strengthening steel beams using FRP under fatigue," The Scientific World Journal, vol. 2014, 2014. [CrossRef] [Google Scholar]
  5. A. Shaat, D. Schnerch, A. Fam, and S. Rizkalla, "Retrofit of steel structures using fiber-reinforced polymers (FRP): State-of-the-art," in Transportation research board (TRB) annual meeting. CD-ROM (04-4063), 2004. [Google Scholar]
  6. A. Belarbi and B. Acun, "FRP systems in shear strengthening of reinforced concrete structures," Procedia Engineering, vol. 57, pp. 2-8, 2013. [CrossRef] [Google Scholar]
  7. A. Belarbi, M. Reda, P. Poudel, H. Tahsiri, M. Dawood, and B. Gencturk, "Prestressing Concrete with CFRP Composites for Sustainability and Corrosion-Free Applications," in MATEC Web of Conferences, 2018, vol. 149, p. 01010: EDP Sciences. [CrossRef] [EDP Sciences] [Google Scholar]
  8. A. S. Karzad, S. Al Toubat, M. Maalej, and P. Estephane, "Repair of reinforced concrete beams using carbon fiber reinforced polymer," in MATEC Web of Conferences, 2017, vol. 120, p. 01008: EDP Sciences. [CrossRef] [EDP Sciences] [Google Scholar]
  9. M. H. Al-Allaf, L. Weekes, L. Augusthus-Nelson, and P. Leach, "An experimental investigation into the bond-slip behaviour between CFRP composite and lightweight concrete," Construction and Building Materials, vol. 113, pp. 15-27, 2016. [CrossRef] [Google Scholar]
  10. S. E. Günaslan, A. Kara°in, and M. E. Öncü, "Properties of FRP Materials for Strengthening," International Journal of Innovative Science, Engineering & Technology, vol. 1, no. 9, 2014. [Google Scholar]
  11. S. Rizkalla and T. Hassan, "Various FRP strengthening techniques for retrofitting concrete structures," in CICE 2001 Conference proceedings, 2001. [Google Scholar]
  12. M. R. Piggott, Load bearing fibre composites, 2nd ed. Boston: Kluwer Academic Publishers, 2002, pp. xii, 475 p. [Google Scholar]
  13. C. Pellegrino, D. Tinazzi, and C. Modena, "Experimental study on bond behavior between concrete and FRP reinforcement," Journal of Composites for Construction, vol. 12, no. 2, pp. 180 189, 2008. [CrossRef] [Google Scholar]
  14. E. Sayed-Ahmed, R. Bakay, and N. Shrive, "Bond strength of FRP laminates to concrete: state-of-the-art review," Electronic Journal of structural engineering, vol. 9, no. 1, pp. 45-61, 2009. [Google Scholar]
  15. C. Arya and N. Farmer, "Design guidelines for flexural strengthening of concrete members using FRP composites," in FRPRCS-5: Fibre-reinforced plastics for reinforced concrete structures Volume 1: Proceedings of the fifth international conference on fibre-reinforced plastics for reinforced concrete structures, Cambridge, UK, 16–18 July 2001, 2001, pp. 167-176: Thomas Telford Publishing. [Google Scholar]
  16. F. Externally Bonded, "Reinforcement for RC Structures," fib Bulletin, no. 14, pp. 51-58, 2001. [Google Scholar]
  17. M. A. Issa, M. Rahman, and R. Alrousan, "Prediction of Ultimate Load at the CFRP-Concrete Interface under Pure Shear Mode," International Journal of Composite Materials, vol. 6, no. 6, pp. 183-195, 2016. [Google Scholar]
  18. R. Seracino, M. Raizal Saifulnaz, and D. Oehlers, "Generic debonding resistance of EB and NSM plateto-concrete joints," Journal of Composites for Construction, vol. 11, no. 1, pp. 62-70, 2007. [CrossRef] [Google Scholar]
  19. A. Serbescu, M. Guadagnini, and K. Pilakoutas, "Standardised double-shear test for determining bond of FRP to concrete and corresponding model development," Composites Part B: Engineering, vol. 55, pp. 277-297, 2013. [CrossRef] [Google Scholar]
  20. C. Tuakta and O. Büyüköztürk, "Conceptual model for prediction of FRP-concrete bond strength under moisture cycles," Journal of Composites for Construction, vol. 15, no. 5, pp. 743-756, 2011. [CrossRef] [Google Scholar]
  21. J. A. Abdalla, R. Hawileh, and A. Al-Tamimi, "Prediction of FRP-concrete ultimate bond strength using Artificial Neural Network," in Modeling, Simulation and Applied Optimization (ICMSAO), 2011 4th International Conference on, 2011, pp. 1-4: IEEE. [Google Scholar]
  22. J. Dai, T. Ueda, and Y. Sato, "Development of the nonlinear bond stress–slip model of fiber reinforced plastics sheet–concrete interfaces with a simple method," Journal of Composites for Construction, vol. 9, no. 1, pp. 52-62, 2005. [CrossRef] [Google Scholar]
  23. J. L. Huang, P. Y. Huang, Z. W. Li, and X. H. Zheng, "Prediction of bond strength of FRP-concrete based on multiple linear regression method," in Advanced Materials Research, 2011, vol. 163, pp. 3623-3628: Trans Tech Publ. [Google Scholar]
  24. G. S. Tong and S. S. Chen, "Prediction Bond Strength between FRP and Concrete Interface by LEFM Method," in Advanced Materials Research, 2014, vol. 988, pp. 195-200: Trans Tech Publ. [CrossRef] [Google Scholar]
  25. N. C. Concha and E. P. Dadios, "Optimization of the rheological properties of self compacting concrete using neural network and genetic algorithm," in Humanoid, Nanotechnology, Information Technology, Communication and Control, Environment and Management (HNICEM), 2015 International Conference on, 2015, pp. 1-6: IEEE. [Google Scholar]
  26. N. C. Concha, "Rheological Optimization of Self Compacting Concrete with Sodium Lignosulfate Based Accelerant Using Hybrid Neural Network-Genetic Algorithm," in Materials Science Forum, 2016, vol. 866, pp. 9-13: Trans Tech Publ. [CrossRef] [Google Scholar]
  27. J. P. M. Rinchon, N. C. Concha, and M. G. V. Calilung, "Reinforced concrete ultimate bond strength model using hybrid neural network-genetic algorithm," in Humanoid, Nanotechnology, Information Technology, Communication and Control, Environment and Management (HNICEM), 2017 IEEE 9th International Conference on, 2017, pp. 1-6: IEEE. [Google Scholar]
  28. J. P. M. Rinchon, "Strength Durability-Based Design Mix of Self-Compacting Concrete with Cementitious Blend using Hybrid Neural Network-Genetic Algorithm," IPTEK Proceedings Series, no. 6, 2017. [Google Scholar]
  29. P. Asteris, K. Kolovos, M. Douvika, and K. Roinos, "Prediction of self-compacting concrete strength using artificial neural networks," European Journal of Environmental and Civil Engineering, vol. 20, no. sup1, pp. s102-s122, 2016. [CrossRef] [Google Scholar]
  30. D. E. Goldberg, "Genetic algorithms in search, optimization and machine learning ’addison-wesley, 1989," Reading, MA, 1989. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.