Design Right Once for Additive Manufacturing

Open Access

Issue		MATEC Web Conf. Volume 188, 2018 5^th International Conference of Engineering Against Failure (ICEAF-V 2018)


Article Number		03020
Number of page(s)		8
Section		Metallic Materials II: Damage Accumulation, Structural Integrity, Advanced Manufacturing Techniques
DOI		https://doi.org/10.1051/matecconf/201818803020
Published online		07 August 2018

T. Wohlers, T. Caffrey, Manuf. Eng. (2016), pp. 45-52. [Google Scholar]
EOS GmbH, “https://www.eos.info/additive-minds” [Google Scholar]
Autodesk, “https://www.autodesk.com/solutions/additive-manufacturing.” [Google Scholar]
MSC_Software, “http://www.mscsoftware.com/application/additivemanufacturing” [Google Scholar]
ANSYS, “https://www.ansys.com/products/structures/additive-manufacturing” [Google Scholar]
MSC_Software, “https://www.simufact.com/simufact-additive.html” [Google Scholar]
P. J. Waterman, Printable. Des. AM (2017), pp. 1-3. [Google Scholar]
EOS GmbH, “https://www.eos.info/systems_solutions/plastic /systems_equipment/formiga_p_110.” [Google Scholar]
EOS GmbH, “https://www.eos.info/systems_solutions/metal /systems_equipment/eosint_m280.” [Google Scholar]
U. New, D. Rules, “Design for Additive Manufacturing Uncover New Design Rules” (2016). [Google Scholar]
S. Hällgren, L. Pejryd, J. Ekengren, Procedia CIRP. 50, 246-251 (2016). [CrossRef] [Google Scholar]
M. Mani, P. Witherell, J. Jee, ASME 2017 Int. Des. Eng. Tech. Conf. Comput. Inf. Eng. Conf. 65, 77-82 (2017). [Google Scholar]
T. R. Kannan, Digit. Eng. (2018), p. 58. [Google Scholar]
E. Komi, Research Report VTT-R-03159-16” (2016),, doi:10.1007/978-1-4419-1120-9. [Google Scholar]
J. Kranz, D. Herzog, C. Emmelmann, J. Laser Appl. 27, S14001 (2015). [Google Scholar]
EPMA, “Introduction to Additive Manufacturing Technology” (2013). [Google Scholar]
M. T. Samperi, Development of Design Guidelines for Metal Additive Manufacturing and Process Selection, 89 (2014). [Google Scholar]
EOS GmbH, “Additive Manufacturing (AM) Basic Design Rules for Additive Manufacturing.” [Google Scholar]
H. Esa, in German-American Frontiers of Engineering Symposium (2013), pp. 14-19. [Google Scholar]
P. Jee, H., Lu, Y., & Witherell, Design Rules With Modularity for Additive Manufacturing. Solid Free. Fabr. Symp., 1450-1462 (2015). [Google Scholar]
J. Sonegard, M. Warholm, thesis, Chalmers University of Technology (2017). [Google Scholar]
T. Design, G. For, A. Manufacturing, Printing by the rules, 13-16 (2016). [Google Scholar]
W. Tao, M. C. Leu, Int. Symp. Flex. Autom., 1-3 (2016). [Google Scholar]
A. Yadollahi, N. Shamsaei, Int. J. Fatigue. 98, 14-31 (2017). [CrossRef] [Google Scholar]
D. Brackett, I. Ashcroft, R. Hague, Proc 22nd Annu. Int. Solid Free. Fabr. Symp., 348-362 (2011). [Google Scholar]
O. Al-Ketan, R. K. Abu Al-Rub, R. Rowshan, J. Mater. Res. 33, 343-359 (2018). [CrossRef] [Google Scholar]
A. J. Kulangara, C. S. P. Rao, P. Subhash Chandra Bose, Mater. Today Proc. 5, 5068-5073 (2018). [CrossRef] [Google Scholar]
Jun Wu; Niels Aage; Ruediger Westermann; Ole Sigmund, IEEE Trans. Vis. Comput. Graph. PP, 1-13 (2017). [Google Scholar]
A. Panesar, M. Abdi, D. Hickman, I. Ashcroft, Addit. Manuf. 19, 81-94 (2018). [CrossRef] [Google Scholar]
A. Y. Hussein, thesis (2013). [Google Scholar]
3D MicroPrint GmbH, “Complex 3D lattice structures-Micro Laser Sintering enables maximum functionality by minimum material use.” [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.