Open Access
| Issue |
MATEC Web Conf.
Volume 188, 2018
5th International Conference of Engineering Against Failure (ICEAF-V 2018)
|
|
|---|---|---|
| Article Number | 03019 | |
| Number of page(s) | 10 | |
| Section | Metallic Materials II: Damage Accumulation, Structural Integrity, Advanced Manufacturing Techniques | |
| DOI | https://doi.org/10.1051/matecconf/201818803019 | |
| Published online | 07 August 2018 | |
- E. Ptochos, G. Labeas, J. Sand. Struct. Mater. 14 (2012) [Google Scholar]
- R. Gümrük, R. Mines, Int. J. Mech. Sc. 68 (2013) [Google Scholar]
- G. Labeas, M. Sunaric, V. Ptochos, Engineering Against Fracture, S. Pantelakis and C. Rodopoulos (Springer, Netherlands, 2009) [Google Scholar]
- Y. Shen, S. Mckown, S. Tsopanos, C. Sutcliffe, R. Mines, W. Cantwell, J. Sandw. Struct. Mater. 12 (2009) [Google Scholar]
- R. Mines, S. Tsopanos, Y. Shen, R. Hasan, S. McKown, Int. J. Impact Eng. 60 (2013) [Google Scholar]
- J. Liu, F. Lu, D. Fang, H. Zhao, Int. J. Protect. Struct. 2 (2011) [Google Scholar]
- G. Labeas, E. Ptochos, Plast. Rubber Comp. 42 (2013) [Google Scholar]
- M.G. Rashed, M, Ashraf, R.A.W. Mines, P. J. Hazell, Mater. & Design 95 (2016) [Google Scholar]
- C. Yan, L. Hao, A. Hussein, S. Bubb, P. Young, D. Raymont, J. Mater. Proc. Techn. 214 (2014) [Google Scholar]
- I. Gibson, D. Rosen, B. Stucker, Additive manufacturing technologies (Springer, New York, 2010). [CrossRef] [Google Scholar]
- J. Kruth, M. Leu, T. Nakagawa, CIRP Annals-Manuf. Techn. 47 (1998) [Google Scholar]
- S. Mellor, L. Hao, D. Zhang, Int. J. Prod. Econ. 149 (2014) [Google Scholar]
- S. Park, D. Rosen, S. Choi, D. Duty, Addit. Manufact. 1-4 (2014) [Google Scholar]
- C. Yan, L. Hao, A. Hussein, D. Raymont, Int. J. Mach. Tools Manuf. 62 (2012) [Google Scholar]
- A. Hussein, L. Hao, C. Yan, R. Everson, Mater. Des. 52 (2013) [Google Scholar]
- A. Foroozmehr, M. Badrossamay, F. Foroozmehr, S. Golabi, Mater. Des. 89 (2016) [Google Scholar]
- N. E. Hodge, R. M. Ferencz and J. M. Solberg, Comput. Mech. 54 (2014) [Google Scholar]
- J.-R. Zhuang, Y.-T. Lee, W.-H. Hsieh, A.-S. Yang, Optics & Laser Techn. 103 (2018) [CrossRef] [Google Scholar]
- I. A. Roberts, Investigation of residual stresses in the laser melting of metal powders in additive layer manufacturing, Thesis submitted in partial fulfilment of the requirements of the University of Wolverhampton for the degree of Doctor of Philosophy (2012) [Google Scholar]
- K. C. Mills, Recommended Values of Thermophysical Properties for Selected Commercial Alloys, (Woodhead Publishing, Cambridge, 2002) [CrossRef] [Google Scholar]
- G. N. Labeas and M. M. Sunaric, Strain 46 (2010) [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.