Nanocomposites for new Functionalities in Multiscale Composites

Ruggero Volponi; Felice De Nicola; Paola Spena

doi:10.1051/matecconf/201818801027

All issues

Volume 188 (2018)

MATEC Web Conf., 188 (2018) 01027

References

Open Access

Issue		MATEC Web Conf. Volume 188, 2018 5^th International Conference of Engineering Against Failure (ICEAF-V 2018)


Article Number		01027
Number of page(s)		10
Section		Composite Materials: Characterization, Mechanical Behavior and Modeling, Advanced Manufacturing Techniques, Multifunctionality
DOI		https://doi.org/10.1051/matecconf/201818801027
Published online		07 August 2018

Wichmann, M. H. G.; Buschhorn, S. T., Gehrmann, J., & Schulte, K. (2009). Phys. Rev. B, Vol. 80, (December 2009), 245437, ISSN 1098-0121 [CrossRef] [Google Scholar]
Iosif D.; Rosca, Suong V., Hoa. (2009) Carbon, Vol.47, Issue.8, (July2009), pp. 1958-1968, ISSN 0008-6223 [CrossRef] [Google Scholar]
R. Volponi • P. Spena • F. De Nicola • A. Grilli ECCM16-16TH EUROPEAN CONFERENCE ON COMPOSITE MATERIALS, Seville, Spain, 22-26 June 2014 [Google Scholar]
L. Guadagno, U. Vietri, M. Raimondo L. Vertuccio, G. Barra, B. De Vivo, P. Lamberti, G. Spinelli, V. Tucci, F. De Nicola R. Volponi, S. Russo Composites Part B Engineering 05/2015; 80 [Google Scholar]
L. L. P. T. M. T. P. P. J. H. Doris W.Y. Wong Composites Part A: Applied Science and Manufacturing, pp. Pages 759-767, Volume 41, Issue 6, (June 2010). [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.

[1] Wichmann, M. H. G.; Buschhorn, S. T., Gehrmann, J., & Schulte, K. (2009). Phys. Rev. B, Vol. 80, (December 2009), 245437, ISSN 1098-0121 [CrossRef] [Google Scholar]

[2] Iosif D.; Rosca, Suong V., Hoa. (2009) Carbon, Vol.47, Issue.8, (July2009), pp. 1958-1968, ISSN 0008-6223 [CrossRef] [Google Scholar]

[3] R. Volponi • P. Spena • F. De Nicola • A. Grilli ECCM16-16TH EUROPEAN CONFERENCE ON COMPOSITE MATERIALS, Seville, Spain, 22-26 June 2014 [Google Scholar]

[4] L. Guadagno, U. Vietri, M. Raimondo L. Vertuccio, G. Barra, B. De Vivo, P. Lamberti, G. Spinelli, V. Tucci, F. De Nicola R. Volponi, S. Russo Composites Part B Engineering 05/2015; 80 [Google Scholar]

[5] L. L. P. T. M. T. P. P. J. H. Doris W.Y. Wong Composites Part A: Applied Science and Manufacturing, pp. Pages 759-767, Volume 41, Issue 6, (June 2010). [CrossRef] [Google Scholar]