Open Access
| Issue |
MATEC Web Conf.
Volume 185, 2018
2018 The 3rd International Conference on Precision Machinery and Manufacturing Technology (ICPMMT 2018)
|
|
|---|---|---|
| Article Number | 00002 | |
| Number of page(s) | 11 | |
| DOI | https://doi.org/10.1051/matecconf/201818500002 | |
| Published online | 31 July 2018 | |
- S. N. Shah, S. Kobayashi, Rigid-plastic analysis in cold heading by the matrix method, Proc. 15th International Conference on Machine Tool Design Research, 603-608 (1974) [Google Scholar]
- G.W. Vickers, A. Plumtree, R. Sowerby, J.L. Duncan, Simulation of the heading process, J. Engineering Materials and Technology, 126-135 (1975) [CrossRef] [Google Scholar]
- C. MacCormack, J. Monaghan, A finite element analysis of cold-forging dies using two-and three-dimensional models, J. of Materials Processing Technology, 118, 286-292 (2001) [CrossRef] [Google Scholar]
- N. Asnafi, On tool stresses in cold heading of fasteners, Engineering Failure Analysis. 6, 321-335 (1999) [CrossRef] [Google Scholar]
- M.C. Sun, G.Y Tzou., L.A. Zheng, Processing animation simulation and FEM analysis of multi-stage cold forging of stainless automotive battery fastener, Indian Journal of Engineering & Materials Sciences, 20, 219-224 (2013). [Google Scholar]
- C.W. Shih, G.Y. Tzou, K.H. Chang, FEM simulation and experimental verification on multi-stage forming of flange sleeve, Journal of Chinese Society Mechanical Engineers, 35, 243-250 (2014) [Google Scholar]
- U. Engel and R. Eckstein, Microforming—from basic research to its realization, J. of Materials Processing Technology, 125-126, 35-44 (2002) [Google Scholar]
- C.J. Wang, D.B. Shan, J. Zhou, B. Guo, L.N. Sun, Size effects of the cavity dimension on the microforming ability during coining process, J. of Materials Processing Technology, 187-188, 256-259 (2007) [Google Scholar]
- J. T. Gau, C. Ptincipe, J. Wang, An experimental study on size effects on flow stress and formability of aluminum and brass for microforming, Journal of Materials Processing Technology, 184, 42-46 (2007) [CrossRef] [Google Scholar]
- U. Engel, Tribology in micro forming, Wear, 260, 265-273 (2006) [Google Scholar]
- D.C. Chen, G.Y. Tzou, Y.J. Li, Robust design on equal channel angle extrusion of Ti-6Al-4V using Taguchi method, International Journal of Material Science, 5, 1 (2015), doi:10.12783/ijmsci.2015.0501 [CrossRef] [Google Scholar]
- G.Y. Tzou, U.C. Chai, S.H. Lin, D.C. Chen, Optimal parameters design and analysis of multi-stage forging of a micro/meso copper fastener, Advances in Energy Science and Equipment Engineering, II, 1307-1310 (2016) [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.