EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 182 (2018) MATEC Web Conf., 182 (2018) 02019 References
Open Access
Issue
MATEC Web Conf.
Volume 182, 2018
17th International Conference Diagnostics of Machines and Vehicles
Article Number 02019
Number of page(s) 9
Section Methodology and Vibroacoustics
DOI https://doi.org/10.1051/matecconf/201818202019
Published online 30 July 2018
  1. J. H. Horng, J. F. Lin, K. Y. Li, Effect of surface roughness on stell roller scuffing. Wear, 184, 203-212 (1995) [CrossRef] [Google Scholar]
  2. T. Kałaczyński, M. Łukasiewicz, J. Musiał, R. Polasik, M. Szczutkowski, N. Dluhunovych, J. Wilczarska, T. Kasprowicz: Analysis of the diagnostic potential research thermovision in the technical state of combustion engine injectors assessment, 24th International Conference Engineering Mechanics 2018, Svratka, Czech Republic, Book of full texts, Institute of Theoretical and Appiled Mechanics of the Czech Academy of Sciences, Prague, 357-360 (2018) [Google Scholar]
  3. J. Krawczyk, Tribological properties of selected structural steels (Właściwości tribologiczne wybranych stali konstrukcyjnych). Tribologia, 4, 223-233 (2010) [Google Scholar]
  4. E. Mańka, M. Słomion, M. Matuszewski, Constructional features of ropes in functional units of mining shaft hoist. Acta Mechanica et Automatica, 12, 1, 66-71 (2018) [CrossRef] [Google Scholar]
  5. M. Matuszewski, T. Mikołajczyk, D. Yu. Pimenov, M. Styp-Rekowski, Influence of structure isotropy of machined surface on the wear process. International Journal of Advanced Manufacturing Technology, 88, 9, 2477-2483 (2017) [CrossRef] [Google Scholar]
  6. M. Matuszewski, M. Styp-Rekowski, Influence of texture direction of kinematic pair elements surfaces on service operated layer transformation. Tribologia 4, 87-97 (2006) [Google Scholar]
  7. Ł. Muślewski, Evaluation Method of Transport Systems Operation Quality. Polish Journal of Environmental Studies, 18, 2A, Hard Olsztyn, Olsztyn (2009) [Google Scholar]
  8. Ł. Muślewski, M. Pająk, B. Landowski, B. Żółtowski, A method for determining the usability potential of ship steam boilers. Polish Maritime Research, 4 (92), 23, 105-111 (2016) [CrossRef] [Google Scholar]
  9. T. Burakowski, T. Wierzchoń, Metal surface engineering (Inżynieria powierzchni metali), (Publ. WNT, Warszawa, 1995) [Google Scholar]
  10. R. Górecka, Z. Polański, Metrology of the surface layer (Metrologia warstwy wierzchniej), (Publ. WNT, Warszawa 1983) [Google Scholar]
  11. A. Bustilo, D. Yu. Pimenov, M. Matuszewski, T. Mikołajczyk, Using artificial intelligence models for the prediction of surface wear based on surface isotropy levels. Robotics and Computer Integrated Manufacturing, 53, 5, 215-227 (2018) [CrossRef] [Google Scholar]
  12. M. Łukasiewicz, T. Kałaczyński, J. Musiał, J. Shalapko, Diagnostics of buggy vehicle transmission gearbox technical state based on modal vibrations. Journal of Vibroengineering, 16, 6, 3137-3145 (2014) [Google Scholar]
  13. M. Styp-Rekowski, Geometrical constructional features of special rolling bearings against their exploitational properties, Proceedings of IVth Symposium INTERTRIBO ’90, C, 93-96 (1990) [Google Scholar]
  14. M. Styp-Rekowski, E. Mańka, M. Matuszewski, M. Madej, D. Ozimina, Tribological problems in shaft hoist ropes wear process. Industrial Lubrication and Tribology, 67, 1, 47-51 (2015) [CrossRef] [Google Scholar]
  15. P. Pawlus, Surface topography: measurement, analysis, impact (Topografia powierzchni: pomiar, analiza, oddziaływanie), (Publ. Rzeszow University of Technology, Rzeszów, 2006) [Google Scholar]
  16. W. Lubimow, K. E. Oczoś, Selected issues of shaping surface irregularities in machining processes (Wybrane zagadnienia kształtowania nierówności powierzchni w procesach obróbkowych). Mechanik, 3, 81-84 (1997) [Google Scholar]
  17. B. Nowicki B., Geometric structure: surface roughness and waviness (Struktura geometryczna: chropowatość i falistość powierzchni), (Publ. WNT, Warszawa, 1991) [Google Scholar]
  18. B. G. Rosen, R. Ohlsson, J. Westberg, 1995. Interactive surface modelling, an implementation of an expert system for specification of surface roughness and topography. International Journal of Machine Tools and Manufacture, 35, 317-324 (1995) [CrossRef] [Google Scholar]
  19. D. J. Whitehouse, Process and quality control using surface finish. Proceedings 6th Symposium IMEKO Metrology for quality control in production, Vienna, 699-710 (1998) [Google Scholar]
  20. J. Raja, Field testing of machine tool diagnostic techniques using surface metrology. Annals of CIRP, 32, 503-506 (1983) [CrossRef] [Google Scholar]
  21. Y. S. Wong, A. Y. C. Nee, X. Q. Nee, X. Q. Li, C. Reisdorf, 1997. Tool condition monitoring using laser scattering. Journal of Material Processing Technology, 63, 205-210 (1997) [CrossRef] [Google Scholar]
  22. K. E. Oczoś, W. Lubimow, Determinism and randomness of surface geometric structures (Determinowość i losowość struktur geometrycznych powierzchni (SGP)). Pomiary Automatyka Kontrolna, 10, 2002, 4-6 (2002) [Google Scholar]
  23. K. E. Oczoś, W. Lubimow, Surface geometric structure (Struktura geometryczna powierzchni), (Publ. Rzeszow University of Technology, Rzeszów, 2003) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.