EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 174 (2018) MATEC Web Conf., 174 (2018) 04012 References
Open Access
Issue
MATEC Web Conf.
Volume 174, 2018
3rd Scientific Conference Environmental Challenges in Civil Engineering (ECCE 2018)
Article Number 04012
Number of page(s) 10
Section Innovative Construction Technologies and Exploitation of Buildings and Structures (Including Industrial, Hydrotechnical, Communal, Transportation and Geotechnical), BIM in Civil Engineering, Legal and Organizational Issues of Preparation and Implementation of Construction Projects
DOI https://doi.org/10.1051/matecconf/201817404012
Published online 26 June 2018
  1. K. Staszałek, Problems large panel reinforcements before thermomodernisation, Construction Engineer 1/2013, 86-88. (in Polish), (2013) [Google Scholar]
  2. M. Wojtowicz, Fault hazard of façade sandwich panels in the buildings constructed by means of large panel technology - real problem or media hit, XXV Scientific -Technical Conference 24 - 27 May, Building failures, 533-542. (in Polish) Miedzyzdroje, (2011) [Google Scholar]
  3. W. Starosolski, Z. Dzierzewicz, Systems of constructions with large slabs in Poland in the years 1970-1985. Overview of material solutions, technology and constructional, Publishing a Wolters Kulwer business, 121-128. (in Polish) Warsaw, (2010). [Google Scholar]
  4. A. Krysiak, K. Regulska, The repair methods of technological defects of external layered cavity walls during thermo modernization in prefabricated buildings, Publisher University of Czestochowa, 116-125 (in Polish), (2012) [Google Scholar]
  5. N. Rasidi, M. D. Soehardjono, A. Zacoeb, Cracking Behavior in Precast Deck Slab Concrete Structure under Cyclic Loading, International Journal of Engineering and Technology Volume 3 No. 8, August, (2013) [Google Scholar]
  6. R. Eligehausen, W. Fuchs, T. M. Sippel (1998), Anchorage to concrete, Structural Engineering and Materials, Vol. 1(4), 392-403 [CrossRef] [Google Scholar]
  7. J. A. Bickley (1981), Pullout testing of concrete. Cast-in-place device enables concrete to be evaluated in the structure with only minor damage, Consulting Engineers. [Google Scholar]
  8. R. Ballarini, S. P. Shah, L. M. Keer (1986), Failure characteristics of shot anchor bolts embedded in a brittle material, Proceedings of the Royal Society of London A 404, 35-54. [CrossRef] [Google Scholar]
  9. M. Ghandehari, S. Krishnaswamy, S. Shah (2000), Bond-Induced Longitudinal Fracture in Reinforced Concrete, Journal of Applied Mechanics, Vol. 67, 740-748, December 2000. [CrossRef] [Google Scholar]
  10. T. A. Weigel, J. P. Mohsen, A. Burke, K. Erdmann, A. Schad, Tensile Strength of Headed Anchor Bolts in Tops of Fully Grouted Concrete Masonry Walls, TMS Journal, 61-70, December 2002. [Google Scholar]
  11. H. Sato, K. Fujikake, S. Mindess (2004), Study on dynamic pullout strength of anchors based on failure models, 13th World Conference on Earthquake Engineering Vancouver, B.C., Canada August 1-6, 2004. Paper No. 854. [Google Scholar]
  12. O. Ch. Choi (2004), Roles of Bearing Angle in Bond Action of Reinforcing Bars to Concrete, Journal of the Korea Concrete Institute, Vol. 16, No. 5, 719-724. [CrossRef] [Google Scholar]
  13. J. C. Gálvez, J. M. Benítez, M. J. Casati, B. S. Tork., D. A. Cendón (2011), Cohesivefrictional model for bond and splitting action of prestressing wire, International Journal for Numerical and Analytical Methods in Geomechanics, Vol. 35, Issue 11, 1257-1277, 10 August 2011. [CrossRef] [Google Scholar]
  14. EOTA. Technical Report 023, Assessment of post-installed rebar connections, Edition November, (2006) [Google Scholar]
  15. EOTA. Technical Report 029, Design of Bonded Anchors, Edition June, (2007) [Google Scholar]
  16. DD CEN/TS 1992-4-1:2009, Design of fastenings for use in concrete. Part 4-1:General, British Standards Institution, (2009) [Google Scholar]
  17. DD CEN/TS 1992-4-3:2009, Design of fastenings for use in concrete. Part 4-3:Anchor channels, British Standards Institution, (2009) [Google Scholar]
  18. DD CEN/TS 1992-4-5:2009, Design of fastenings for use in concrete. Part 4-5:Chemical systems, British Standards Institution, (2009) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.