EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 165 (2018) MATEC Web Conf., 165 (2018) 22006 References
Open Access
Issue
MATEC Web Conf.
Volume 165, 2018
12th International Fatigue Congress (FATIGUE 2018)
Article Number 22006
Number of page(s) 6
Section Posters
DOI https://doi.org/10.1051/matecconf/201816522006
Published online 25 May 2018
  1. C. Yan, L. Hao, A. Hussein, and D. Raymont, Int. J. Mach. Tools Manuf., 62, 32-38 (2012) [CrossRef] [Google Scholar]
  2. P. Razvan and P. Ancuta, New Trends in 3D Printing, (InTech, 2016). [Google Scholar]
  3. M. Wong, I. Owen, C.J. Sutcliffe, and A. Puri, International Journal of Heat and Mass Transfer, 52(1), 281-288 (2009) [CrossRef] [Google Scholar]
  4. B. Vandenbroucke and J.-P. Kruth, Rapid Prototyping Journal, 13(4), 196-203 (2007) [CrossRef] [Google Scholar]
  5. M. Javaid and A. Haleem, Alexandria Journal of Medicine, (2017) [Google Scholar]
  6. P. Hanzl, M. Zetek, T. Bakša, and T. Kroupa, Procedia Engineering, 100, 1405-1413 (2015) [CrossRef] [Google Scholar]
  7. K. Guan, Z. Wang, M. Gao, X. Li, and X. Zeng, Mater. Des., 50, 581-586 (2013) [CrossRef] [Google Scholar]
  8. G. Yu, D. Gu, D. Dai, M. Xia, C. Ma, and K. Chang, Appl. Phys. A, 122(10), 891 (2016) [CrossRef] [Google Scholar]
  9. M. Gorelik, Int. J. Fatigue, 94, 168-177 (2017) [CrossRef] [Google Scholar]
  10. X. Huang, M.C. Chaturvedi, and N.L. Richards, Metall. Mater. Trans. A, 27(3), 785-790 (1996) [CrossRef] [Google Scholar]
  11. M.H. Bina, Metallurgy - Advances in Materials and Processes, (InTech, Rijeka. 2012). [Google Scholar]
  12. P. Mercelis and J.-P. Kruth, Rapid Prototyping Journal, 12(5), 254-265 (2006) [CrossRef] [Google Scholar]
  13. L. Parry, I.A. Ashcroft, and R.D. Wildman, Additive Manufacturing, 12, 1-15 (2016) [CrossRef] [Google Scholar]
  14. K. Kempen, B. Vrancken, L. Thijs, S. Buls, J. Van Humbeeck, and J.-P. Kruth. in Solid Freeform Fabrication Symposium Proceedings. 2013) [Google Scholar]
  15. J.J. Lewandowski and M. Seifi, Annu. Rev. Mater. Res, 46, 14.1-14.36 (2016) [CrossRef] [Google Scholar]
  16. V. Cain, L. Thijs, J. Van Humbeeck, B. Van Hooreweder, and R. Knutsen, Additive Manufacturing, 5, 68-76 (2015) [CrossRef] [Google Scholar]
  17. T. Vilaro, C. Colin, J.D. Bartout, L. Nazé, and M. Sennour, Mater. Sci. Eng. A, 534, 446-451 (2012) [CrossRef] [Google Scholar]
  18. E. Wycisk, A. Solbach, S. Siddique, D. Herzog, F. Walther, and C. Emmelmann, Physics Procedia, 56, 371-378 (2014) [CrossRef] [Google Scholar]
  19. T.M. Mower and M.J. Long, Mater. Sci. Eng. A, 651, 198-213 (2016) [CrossRef] [Google Scholar]
  20. A. Yadollahi, N. Shamsaei, S.M. Thompson, A. Elwany, and L. Bian, Int. J. Fatigue, (2016) [Google Scholar]
  21. D. Greitemeier, F. Palm, F. Syassen, and T. Melz, Int. J. Fatigue, 94, 211-217 (2017) [CrossRef] [Google Scholar]
  22. G. Kasperovich and J. Hausmann, J. Mater. Process. Technol., 220, 202-214 (2015) [CrossRef] [Google Scholar]
  23. V. Popovich, E. Borisov, A. Popovich, V.S. Sufiiarov, D. Masaylo, and L. Alzina, Mater. Des., 131, 12-22 (2017) [CrossRef] [Google Scholar]
  24. Y. Bai, Y. Yang, D. Wang, and M. Zhang, Mater. Sci. Eng. A, (2017) [Google Scholar]
  25. M.M. Dewidar, K.A. Khalil, and J. Lim, Transactions of Nonferrous Metals Society of China, 17(3), 468-473 (2007) [CrossRef] [Google Scholar]
  26. A. Riemer, S. Leuders, M. Thöne, H. Richard, T. Tröster, and T. Niendorf, Eng. Fract. Mech., 120, 15-25 (2014) [CrossRef] [Google Scholar]
  27. S. Leuders, T. Lieneke, S. Lammers, T. Tröster, and T. Niendorf, J. Mater. Res., 29(17), 1911-1919 (2014) [CrossRef] [Google Scholar]
  28. P.J. da Silva Bartolo, A.C.S. de Lemos, A.M.H. Pereira, A.J.D.S. Mateus, C. Ramos, C. Dos Santos, D. Oliveira, E. Pinto, F. Craveiro, and H.M.C. da Rocha Terreiro. in Proceedings of the 6th International Conference on Advanced Research in Virtual and Rapid Prototyping. (Portugal, 2013) [Google Scholar]
  29. Y. Zhong, L. Liu, S. Wikman, D. Cui, and Z. Shen, J. Nucl. Mater., 470, 170-178 (2016) [CrossRef] [Google Scholar]
  30. M. Zhang, C.-N. Sun, X. Zhang, P.C. Goh, J. Wei, D. Hardacre, and H. Li, Mater. Sci. Eng. A, 703, 251-261 (2017) [CrossRef] [Google Scholar]
  31. B. Zhang, Y. Li, and Q. Bai, Chinese Journal of Mechanical Engineering, 30(3), 515-527 (2017) [CrossRef] [Google Scholar]
  32. K. Saeidi, X. Gao, Y. Zhong, and Z.J. Shen, Mater. Sci. Eng. A, 625, 221-229 (2015) [CrossRef] [Google Scholar]
  33. A. Vinckier and A. Dhooge, J. Heat. Treat., 1(1), 72-80 (1979) [CrossRef] [Google Scholar]
  34. R. Skelton, I. Goodall, G. Webster, and M. Spindler, Int. J. Press. Vessels Pip., 80(7), 441-451 (2003) [CrossRef] [Google Scholar]
  35. L. Liu, Q. Ding, Y. Zhong, J. Zou, J. Wu, Y.-L. Chiu, J. Li, Z. Zhang, Q. Yu, and Z. Shen, Mater. Today, (2017) [Google Scholar]
  36. P.J. Withers and H.K.D.H. Bhadeshia, Mater. Sci. Technol., 17(4), 366-375 (2001) [CrossRef] [Google Scholar]
  37. A.R.A. Dezfoli, W.-S. Hwang, W.-C. Huang, and T.-W. Tsai, Scientific Reports, 7, 41527 (2017) [CrossRef] [Google Scholar]
  38. Y. Liu, Y. Yang, and D. Wang, Int. J. Adv. Manuf. Technol., 87(1-4), 647-656 (2016) [CrossRef] [Google Scholar]
  39. H. Zhao and T. DebRoy, Welding Journal, 80(8), 204-210 (2001) [Google Scholar]
  40. M. Zhang, C.-N. Sun, X. Zhang, P.C. Goh, J. Wei, H. Li, and D. Hardacre, JOM, 70(3), 390–395 (2018) [CrossRef] [Google Scholar]
  41. P. Lukáš and L. Kunz, Int. J. Fatigue, 11(1), 55-58 (1989) [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.