Open Access
Issue
MATEC Web Conf.
Volume 165, 2018
12th International Fatigue Congress (FATIGUE 2018)
Article Number 14007
Number of page(s) 6
Section High Cycle Fatigue, Fatigue at Notches
DOI https://doi.org/10.1051/matecconf/201816514007
Published online 25 May 2018
  1. Linder J, Axelsson M, Nilsson H. The influence of porosity on the fatigue life for sand and permanent mould cast aluminium. 2006; [Google Scholar]
  2. Jiang H, Bowen P, Knott JF. Fatigue performance of a cast aluminium alloy Al-7Si-Mg with surface defects. J Mater Sci. 1999;34(4):719–25. [CrossRef] [Google Scholar]
  3. Jiang SN, Xu SY. Influence of Surface Conditions on the Fatigue Behavior of A357 Aluminum Alloy. Mater Sci Forum [Internet]. 2016;850:113–9. Available from: http://www.scientific.net/MSF.850.113 [CrossRef] [Google Scholar]
  4. Serrano-Munoz I, Buffiere J-Y, Verdu C, Gaillard Y, Mu P, Nadot Y. Influence of surface and internal casting defects on the fatigue behaviour of A357-T6 cast aluminium alloy. Int J Fatigue. 2016; [Google Scholar]
  5. Yamabe J, Kobashi M. Influence of casting surfaces on fatigue strength of ductile cast iron. Fatigue Fract Eng Mater Struct. 2006;29(6):403–15. [CrossRef] [Google Scholar]
  6. Svenningsson R, Svensson H, Borgström H, Gotte A. Influence of the surface roughness on the fatigue properties in ausferritic ductile irons (ADI). MATEC Web Conf [Internet]. 2014;12:6006. Available from: http://www.scopus.com/inward/record.url?eid=2-s2.0-84903288711&partnerID=tZOtx3y1 [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.