Open Access
| Issue |
MATEC Web Conf.
Volume 165, 2018
12th International Fatigue Congress (FATIGUE 2018)
|
|
|---|---|---|
| Article Number | 04006 | |
| Number of page(s) | 8 | |
| Section | Crack Initiation Process and First Stages of Crack Propagation | |
| DOI | https://doi.org/10.1051/matecconf/201816504006 | |
| Published online | 25 May 2018 | |
- P.D. Lee, T.C. Lindley, C.W.J. Cheong, G.R. Davis, J. Elliot. Proceeding of COM, Vancouver, BC, 2003, p.457. [Google Scholar]
- S.K. Das, J.A.S. Green. Aluminum industry and climate change assessment and responses. JOM (2010), 62 (2), 27-31. [CrossRef] [Google Scholar]
- EEA/OEA Recycling Division. Aluminum recycling in Europe. European Aluminum 2007, 1, 51. [Google Scholar]
- N. Vanderess, E. Maire, A. Chabod, J-Y Buffière. Microtomographic study and finite element analysis of the porosity harmfulness in a cast aluminium alloy. Int J Fatigue (2011), 33, 1514–25. [CrossRef] [Google Scholar]
- I. Bacaicoa, M. Luetje, M. Wicke, A. Brueckner-Foit. Characterization of Casting Pores in Fe-rich Al-Si-Cu Alloys by Microtomography and Finite Element Analysis. Procedia Structural Integrity (2016) 2, 2269-2276. [CrossRef] [Google Scholar]
- L. Wang, N. Limodin, A. El Bartali, J.-F. Witz, R. Seghir, J.-Y. Buffiere, E. Charkuk. Influence of pores on crack initiation in monotonic tensile and cyclic loadings in lost foam casting A319 alloy by using 3D in-situ analysis. Mater. Sci. & Eng. A (2016), vol. 673, pp. 362-372. [CrossRef] [Google Scholar]
- I. Bacaicoa, M. Luetje, M. Wicke, A. Geisert, M. Fehlbier, A, Brueckner-Foit. Characterization of casting defects in Fe-rich Al-Si-Cu Alloys by Microtomography and Finite Element Analysis. Engng. Fract. Mech. (2017), 183, 159-169. [CrossRef] [Google Scholar]
- I. Bacaicoa, I., Luetje, M., Wicke, M., Geisert, A., Zeismann, F., Fehlbier, M., Brueckner-Foit, A. (2016). 3D Morphology of Al5FeSi inclusions in high Fe-content Al-Si-Cu Alloys. Procedia Structural Integrity, vol. 2. pp. 2269-2276. [CrossRef] [Google Scholar]
- M. Luetje, I. Bacaicoa, M. Wicke, A. Geisert, M. Fehlbier, A.Brueckner-Foit(2017). 3D characterization of fatigue damage mechanism in a cast aluminum alloy using X-ray tomography. International Journal of Fatigue, vol. 103, pp. 363-370. [CrossRef] [Google Scholar]
- I. Bacaicoa, P.K. Dwivedi, M. Luetje, F. Zesimann, A. Geisert, A. Brueckner-Foit, M. Fehlbier. Effect of non-equilibrium heat treatments on the microstructure and tensile prioperties of an Al-Si-Cu alloy. Materials Science and Engineering A (2016), vol. 673, 562-571. [CrossRef] [Google Scholar]
- P. Ashtari, H. Tezuka, T. Sato. Influence oft he Sr and Mn additions on intermetallic compound morphologies in Al-SI-Cu-Fe cast alloys. Mater. Trans. (2003), 44 (12), 2161-2174. [CrossRef] [Google Scholar]
- FEI Company. Avizo 3D Software. https://www.fei.com/software/amira-avizo (2016), 9.2. [Google Scholar]
- Z. Li, N. Limodin, A. Tandjaoui, P. Quaegebeur, P. Osmond, D. Balloy. Influence of Sr, Fe and Mn content and casting process on the microstructures and mechanical properties of AlSi7Cu3 alloy .Mater. Sci. & Eng. A. (2017), vol. 24, pp. 286-297. [CrossRef] [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.