Open Access
Issue
MATEC Web Conf.
Volume 165, 2018
12th International Fatigue Congress (FATIGUE 2018)
Article Number 02008
Number of page(s) 9
Section Additive Manufacturing
DOI https://doi.org/10.1051/matecconf/201816502008
Published online 25 May 2018
  1. S. Leuders, T. Lieneke, S. Lammers, T. Tröster et T. Niendorf, J. Mater. Res., vol. 29, pp. 1911-1919, 7 2014. [CrossRef] [Google Scholar]
  2. G. Kasperovich et J. Hausmann, J. Mater. Process. Technol., vol. 220, pp. 202-214, 6 2015. [CrossRef] [Google Scholar]
  3. P. Edwards et M. Ramulu, Mater. Sci. Eng., A, vol. 598, pp. 327-337, 3 2014. [CrossRef] [Google Scholar]
  4. W. Xu, S. Sun, J. Elambasseril, Q. Liu, M. Brandt et M. Qian, JOM, vol. 67, pp. 668-673, 1 2015. [CrossRef] [Google Scholar]
  5. H. Gong, K. Rafi, H. Gu, G. D. J. Ram, T. Starr et B. Stucker, Mater. Des., vol. 86, pp. 545-554, 12 2015. [CrossRef] [Google Scholar]
  6. L. Bian, S. M. Thompson et N. Shamsaei, JOM, vol. 67, pp. 629-638, 2 2015. [CrossRef] [Google Scholar]
  7. H. K. Rafi, T. L. Starr et B. E. Stucker, The Int. J. Adv. Manuf. Technol., vol. 69, pp. 1299-1309, 6 2013. [CrossRef] [Google Scholar]
  8. L. Facchini, E. Magalini, P. Robotti, A. Molinari, S. Höges et K. Wissenbach, RAPID PROTOTYPING J, vol. 16, pp. 450-459, 10 2010. [CrossRef] [Google Scholar]
  9. S. Leuders, S. Meiners, L. Wu, A. Taube, T. Tröster et T. Niendorf, J. Mater. Process. Technol., vol. 248, pp. 130-142, 2017. [CrossRef] [Google Scholar]
  10. A. Fatemi, R. Molaei, S. Sharifimehr, N. Phan et N. Shamsaei, Int. J. Fatigue, vol. 100, pp. 347-366, 7 2017. [CrossRef] [Google Scholar]
  11. A. Fatemi, R. Molaei, S. Sharifimehr, N. Shamsaei et N. Phan, Int. J. Fatigue, vol. 99, pp. 187-201, 6 2017. [CrossRef] [Google Scholar]
  12. J. Günther, D. Krewerth, T. Lippmann, S. Leuders, T. Tröster, A. Weidner, H. Biermann et T. Niendorf, Int. J. Fatigue, vol. 94, pp. 236-245, 1 2017. [CrossRef] [Google Scholar]
  13. D. Greitemeier, F. Palm, F. Syassen et T. Melz, Int. J. Fatigue, vol. 94, pp. 211-217, 1 2017. [CrossRef] [Google Scholar]
  14. S. Beretta et S. Romano, Int. J. Fatigue, vol. 94, pp. 178-191, 1 2017. [CrossRef] [Google Scholar]
  15. L. Thijs, F. Verhaeghe, T. Craeghs, J. V. Humbeeck et J.-P. Kruth, Acta Mater., vol. 58, pp. 3303- 3312, 5 2010. [CrossRef] [Google Scholar]
  16. Y. Murakami, Elsevier, 2002. [Google Scholar]
  17. G. Kasperovich, J. Haubrich, J. Gussone et G. Requena, Mater. Des., vol. 105, pp. 160-170, 9 2016. [CrossRef] [Google Scholar]
  18. C. E. Stromeyer, Proceedings of the Royal Society of London A: Mathematical, Physical and Engineering Sciences, vol. 90, pp. 411-425, 1914. [CrossRef] [Google Scholar]
  19. K. S. Chan, M. Koike, R. L. Mason et T. Okabe, Metall. Mater. Trans. A, vol. 44, pp. 1010-1022, 10 2012. [CrossRef] [Google Scholar]
  20. R. Li, J. Liu, Y. Shi, L. Wang et W. Jiang, Int. J. Adv. Manuf. Technol., vol. 59, pp. 1025-1035, 8 2011. [CrossRef] [Google Scholar]
  21. R. Konecna, G. Nicoletto, S. Fintova et M. Frkan, Procedia Struct. Integrity, vol. 7, pp. 92-100, 2017. [CrossRef] [Google Scholar]
  22. M. Benedetti, E. Torresani, M. Leoni, V. Fontanari, M. Bandini, C. Pederzolli et C. Potrich, J. Mech. Behav. Biomed. Mater., vol. 71, pp. 295-306, 7 2017. [CrossRef] [Google Scholar]
  23. A. Townsend, N. Senin, L. Blunt, R. K. Leach et J. S. Taylor, Precis. Eng., vol. 46, pp. 34-47, 10 2016. [CrossRef] [Google Scholar]
  24. I. Koutiri, E. Pessard, P. Peyre, O. Amlou et T. D. Terris, J. Mater. Process. Technol., vol. 255, pp. 536- 546, 2018. [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.