EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 162 (2018) MATEC Web Conf., 162 (2018) 01005 References
Open Access
Issue
MATEC Web Conf.
Volume 162, 2018
The 3rd International Conference on Buildings, Construction and Environmental Engineering, BCEE3-2017
Article Number 01005
Number of page(s) 9
Section Geotechnical and Transportation Engineering
DOI https://doi.org/10.1051/matecconf/201816201005
Published online 07 May 2018
  1. A.F. Barazanji, Soil of Iraq, Ph.D. Thesis, State University of Ghent, Belgium, (1973) [Google Scholar]
  2. S.P. Clemence, A.O. Finbarr, J Geotech Eng Div, Proc. ASCE 107, 305-317 (1981) [Google Scholar]
  3. Z.M. Mansour, Z. Chik, M.R. Taha, J Appl Sci 8, 4434-4439 (2008) [CrossRef] [Google Scholar]
  4. E. Bock, Can J Chem 39, 1746-1751 (1961) [CrossRef] [Google Scholar]
  5. J. Herrero, J. Porta, Geoderma 96, 47-61 (2000) [CrossRef] [Google Scholar]
  6. J.H. Dudley, ASCE J Soil Mech Found Div 96, 925-947 (1970) [Google Scholar]
  7. R.N. Arutyunyan, Soil Mech Found Eng 15, 183-185, (1978) [CrossRef] [Google Scholar]
  8. S.S. Razouki, R.R. Al-Omari, I.H. Nashat, H.F. Razouki, S. Khalid, Proceedings of the symposium on gypsiferous soils and their effect on structures, NCCL, 7-33 (Baghdad, 1994) [Google Scholar]
  9. FAO, Management of gypsiferous soil, Bulletin No. 62, (Rome, Italy, 1990) [Google Scholar]
  10. I.H. Nashat, Ph.D Thesis, University of Baghdad, Baghdad, Iraq, (1990) [Google Scholar]
  11. A. Al-Mufty, Ph.D Thesis, University of Baghdad, Baghdad, Iraq, (1997) [Google Scholar]
  12. Q.A. Al-Obaidi, M.Sc. Thesis, Al-Mustansiriyah University, Baghdad, Iraq, (2003) [Google Scholar]
  13. S.S. Razouki, O.A. El-Janabi, Q J Eng Geo Hydroge 31, 87-89 (1999) [CrossRef] [Google Scholar]
  14. B.S. Albusoda, M.Sc. Thesis, University of Baghdad, Baghdad, Iraq, (1999) [Google Scholar]
  15. A. Ismail, W.J. Hilo, J App Sci 8, 4610-4616 (2008) [CrossRef] [Google Scholar]
  16. M.A. Al-Dabbas, T. Schanz, M. J. Yassen, Arab J Geosci 22, 111-119 (2010) [Google Scholar]
  17. R.N. Arutyunyan, A.V. Manukyan, Soil Mech Found Eng 19, 151-154 (1982) [CrossRef] [Google Scholar]
  18. A.H. Cooper, Eng Geol, Special Publication 15, 265-275 (1998) [Google Scholar]
  19. A.H. Cooper, Q J Eng Geo Hydroge 41, 409-424 (2008) [CrossRef] [Google Scholar]
  20. A.A. Ahmad, M.Sc. Thesis, University of Mosul, Mosul, Iraq, (1985) [Google Scholar]
  21. S.A. Aiban, H.I. Al-Abdul Wahhab, O.S.B. Al-Amoudi, H. R. Ahmed, Constr Build Mater 12, 329-340 (1998) [CrossRef] [Google Scholar]
  22. M. Hua, B. Wang, L. Chen, Y. Wang, V.M. Quynh, B. He, X. Li, Fuel 89, 1812-1817 (2010) [CrossRef] [Google Scholar]
  23. H.H. Karim, T. Schanz, A.N. Ibrahim, Proceedings of the 2nd international conference of buildings, construction and environmental engineering, American University of Beirut (BCEE2), 17-18 Oct., 2015, Geotechnical Engineering part, 95-100 (2015) [Google Scholar]
  24. ASTM D422, Particle-size analysis of soils, (ASTM International, West Conshohocken, PA, United States, 2007) [Google Scholar]
  25. BS 1377:6B, Method of test for soils for civil engineering purposes, Chemical and electro-chemical tests, (British Standard Institution, London, UK, 1990) [Google Scholar]
  26. BS 1377:2A, Method of test for soils for civil engineering purposes, (British Standard Institution, London, UK, 1990) [Google Scholar]
  27. BS 1377:3, Method of test for soils for civil engineering purposes, Chemical and electro-chemical tests, (British Standard Institution, London, UK, 1990) [Google Scholar]
  28. ASTM D2216, Laboratory determination of water (moisture) content of soil and rock by mass, (ASTM International, West Conshohocken, PA, United States, 2010) [Google Scholar]
  29. ASTM D3080, Standard test method for direct shear test of soils under consolidated drained conditions, (ASTM International, West Conshohocken, PA, United States, 1998) [Google Scholar]
  30. ASTM D2435-04, Standard test methods for one-dimensional consolidation properties of soils using incremental loading, (ASTM International, West Conshohocken, PA, United States, 2004) [Google Scholar]
  31. ASTM D5333-03, Standard test method for measurement of collapse potential of soils, (ASTM International, West Conshohocken, PA, United States, 2003) [Google Scholar]
  32. S. Houston, W. Houston, C. Zapata, C. Lawrence, Geotech Geol Eng 19, 333-355 (2001) [Google Scholar]
  33. I. Jefferson, C. Rogers, ICE manual of geotechnical engineering, Vol. 1 of ICE manuals (ICE Publishing, London, UK, 2012) [Google Scholar]
  34. Q.A.J. Al-Obaidi, Ph.D Dissertation, Faculty of Civil and Environmental Engineering, Ruhr-Universität Bochum, Bochum, (2014) [Google Scholar]
  35. S.N.M. Seleam, M.Sc. Thesis, University of Technology, Baghdad, Iraq (1988) [Google Scholar]
  36. J.A. Al-Nouri, F.F. Al-Qaissy, Symposium on recent advances in geotechnical engineering, 8-14, Singapore, (1990) [Google Scholar]
  37. V.P Petrukhin, E.A. Arkelyan, Soil Mech Found Eng 21, 23-25 (1985) [Google Scholar]
  38. Y.M. Al-Badran, M.Sc. Thesis, University of Baghdad, Baghdad, Iraq, (2001) [Google Scholar]
  39. J.E. Jennings, K. Knight, Proceeding 4th international conference on soil mechanics and foundation engineering, 1, 316-319 (1957) [Google Scholar]
  40. K. Knight, Proc. of 3rd regional conference of Africa on soil mechanics and foundation engineering, 1, 127-130 (1963) [Google Scholar]
  41. E. Lawton, R. Fragaszy, J. Hardcastle, J Geotech Eng 115, 1252-1267 (ASCE, 1989) [Google Scholar]
  42. Z. Lin, S. Wang, Eng Geo 25, 271-282, (1988) [CrossRef] [Google Scholar]
  43. A. Al-Mufty, International conference on geotechnical engineering-Beirut, (2004) [Google Scholar]
  44. M. Fattah, Y. Al-Shakarchi, H. Al-Numani, Eng Tech J 26, 1461-1485 (2008) [Google Scholar]
  45. J. Jennings, K. Knight, Proc. 6th African conf. soil mechanics and foundation engineering, Durban, 99-105 (1975) [Google Scholar]
  46. ASTM D6836, Standard test methods for determination of the soil water characteristic curve for desorption using a hanging column, pressure extractor, chilled mirror hygrometer, and/or centrifuge, (ASTM International, West Conshohocken, PA, United States, 2008) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.