Open Access
MATEC Web Conf.
Volume 160, 2018
International Conference on Electrical Engineering, Control and Robotics (EECR 2018)
Article Number 01009
Number of page(s) 6
Section Electronic and Electrical Engineering
Published online 09 April 2018
  1. Seppo Hanninen, and Matti Lehtonen. “Characteristics of earth faults in electrical distribution networks with high impedance earthing.” Electric Power Systems Research 44.3 (1998): 155-161. [CrossRef] [Google Scholar]
  2. Druml, Gernot, Andreas Kugi, and Olaf Seifert. “A new directional transient relay for high ohmic earth faults.” CIRED 17th International Conference on Electricity Distribution, Barcelona, Spain. 2003. [Google Scholar]
  3. Seppo Hanninen. Single phase earth faults in high impedance grounded networks: characteristics, indication and location. VTT Technical Research Centre of Finland, 2001. [Google Scholar]
  4. Seppo Hanninen, and Matti Lehtonen. “Earth fault distance computation with fundamental frequency signals based on measurements in substation supply bay.” VTT TIEDOTTEITA (2002). [Google Scholar]
  5. Soon-Ryul Nam, et al. “Ground-fault location algorithm for ungrounded radial distribution systems.“Electrical Engineering 89.6 (2007): 503-508. [CrossRef] [Google Scholar]
  6. Hanninen, S., et al. “Comparison of wavelet and differential equation algorithms in earth fault distance computation.” Proceedings of Conference on Power System Computation, Norway. 1999. [Google Scholar]
  7. Igel, M., H-J. Koglin, and P. Schegner. “New algorithms for earthfault distance protection in insulated and compensated networks.” European Transactions on Electrical Power 1.5 (1991): 253-259. [CrossRef] [Google Scholar]
  8. Ke Jia, David Thomas, and Mark Sumner. “A new single-ended fault-location scheme for utilization in an integrated power system.” Power Delivery, IEEE Transactions on 28.1 (2013): 38-46. [CrossRef] [Google Scholar]
  9. Imriš, Peter. Transient based earth fault location in 110 kV subtransmission networks. Helsinki University of Technology, 2006. [Google Scholar]
  10. Zhang, Fan, et al. “New Algorithm Based on Traveling Wave for Location of Single Phase to Ground Fault in Tree Type Distribution Network.” Zhongguo Dianji Gongcheng Xuebao(Proceedings of the Chinese Society of Electrical Engineering). Vol. 27. No. 28. 2007. [Google Scholar]
  11. YU, Sheng-nan, Hai BAO, and Yi-han YANG. “Practicalization of Fault Location in Distribution Lines [J].” Proceedings of the CSEE 28 (2008): 016. [Google Scholar]
  12. Borghetti, Alberto, et al. “On the use of continuous-wavelet transform for fault location in distribution power systems.” International Journal of Electrical Power & Energy Systems 28.9 (2006): 608-617. [CrossRef] [Google Scholar]
  13. Ye, Lei, et al. “An improved fault-location method for distribution system using wavelets and support vector regression.” International Journal of Electrical Power & Energy Systems 55 (2014): 467-472. [CrossRef] [Google Scholar]
  14. ZHANG, Li, et al. “Distribution Network Fault Location Based on the Zero Sequence Current and Magnetic Field Detection Spot.” Automation of Electric Power Systems 14 (2008): 017. [Google Scholar]
  15. ZHANG, Li, et al. “Method of mobile phase-comparison for fault location of distribution network.” Proceedings of the CSEE 7 (2009): 015. [Google Scholar]
  16. Nam, Soon-Ryul, et al. “Single line-to-ground fault location based on unsynchronized phasors in automated ungrounded distribution systems.“Electric Power Systems Research 86 (2012): 151-157. [CrossRef] [Google Scholar]
  17. Li, Zhang, et al. “Online fault location of neutral point ungrounded distribution network based on zero-sequence power direction.” Automation of Electric Power Systems 32.17 (2008): 79-82. [Google Scholar]
  18. LI, Meng-qiu, et al. “A new approach on detecting the single-to ground fault location on power system with neutral unearthed [J].” Proceedings of the Csee 10 (2001) [Google Scholar]
  19. Yang Yihan, et al. “Research on fault location online for neutral point ungrounded system” Journal of North China Electric University, 35.6 (2008): 1-6. [Google Scholar]
  20. Wang, Yumei, Hao Guo, and Shengda Hui. “Fault Location Approach for Resonant Grounded System Based on Remnant Current Increment Method.“Automation of Electric Power Systems 2 (2011): 015. [Google Scholar]
  21. Sun, Bo, et al. “Single phase to ground fault section location based on transient signals in non-solidly earthed network.” Autom Electr Power Syst 32.3 (2008): 52-55. [Google Scholar]
  22. Elkalashy, Nagy I., et al. “DWT-based detection and transient power direction-based location of high-impedance faults due to leaning trees in unearthed MV networks.” Power Delivery, IEEE Transactions on 23.1 (2008): 94-101. [CrossRef] [Google Scholar]
  23. Ma, Shicong, et al. “An earth fault locating method in feeder automation system by examining correlation of transient zero mode currents.” Autom Electric Power Syst 32.7 (2008): 48-52. [Google Scholar]
  24. Sun, Bo, et al. “Earth fault location based on transient phase current in non-solidly earthed network.” Power System Protection and Control 40.18 (2012): 69-74. [Google Scholar]
  25. Linli, ZHANG., et al. “Transient Fault Locating Method Based on Line Voltage and Zero-mode Current in Non-solidly Earthed Network.” Proceedings of CSEE 32.013 (2012): I0015-I0015. [Google Scholar]
  26. Xue Yongduan, et al. “Small-current grounding fault location based on transient signals of distribution automation system” Electric Power Automation Equipment, 33.12(2013) [Google Scholar]
  27. Yi Guiye, Yang Xuechang, Wu Zhensheng. “Transfer function algorithm for locating ground faults in power distribution networks” J Tsinghua Univ(Sci & Tech), 2000, 40(7): 31-34. [Google Scholar]
  28. Hanninen, S., and M. Lehtonen. “Earth fault distance computation with artificial neural network trained by neutral voltage transients.” Power Engineering Society Summer Meeting, 2001. Vol. 2. IEEE, 2001. [Google Scholar]
  29. Chunju, Fan, et al. “Application of wavelet fuzzy neural network in locating single line to ground fault (SLG) in distribution lines.” International Journal of Electrical Power & Energy Systems 29.6 (2007): 497-503. [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.