Open Access
Issue
MATEC Web Conf.
Volume 153, 2018
The 4th International Conference on Mechatronics and Mechanical Engineering (ICMME 2017)
Article Number 01004
Number of page(s) 7
Section Novel Materials and Properties
DOI https://doi.org/10.1051/matecconf/201815301004
Published online 26 February 2018
  1. Andrew Parrish, Masoud RaisRohani, Ali Najafi, Int. J. Crashworthiness, 17(3) (2012) 259-281. [CrossRef] [Google Scholar]
  2. Pollock TM, Science, 328(5981) (2010) 986-987. [CrossRef] [PubMed] [Google Scholar]
  3. Murray J, King D, Nature, 481(7382) (2012) 433. [CrossRef] [PubMed] [Google Scholar]
  4. W Altenhof, A Raczy, M Laframboise, et al., Int. J. Impact Eng., 30(2) (2004) 117-142. [CrossRef] [Google Scholar]
  5. Xiaoming Chen, Shen-Rong Wu, David A Wagner, et al., Int. J. Crashworthiness, 7(4) (2002) 429-440. [Google Scholar]
  6. Dørum C, Hopperstad O S, Langseth M, et al., SAE Technical Paper, 2005-01-0724, 2005. [Google Scholar]
  7. Dørum C, Hopperstad O S, Lademo O G, et al., Comput. Struct., 85(1) (2007) 89-101. [CrossRef] [Google Scholar]
  8. A Parrish, M RaisRohani, A Najafi, //52nd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference<BR> 19th, 4-7 April 2011, Denver, Colorado. [Google Scholar]
  9. Feng Zhu, Clifford C. Chou, King H. Yang, et al., Int. J. Crashworthiness, 17(5) (2012) 540-552. [CrossRef] [Google Scholar]
  10. DH Liu, HP Yu, CF Li, Mater. Sci. Eng. A, 551 (2012) 280-287. [CrossRef] [Google Scholar]
  11. Y Tian, L Huang, H Ma, et al., Mater. Design(1980-2015), 54 (2014) 587-597. [CrossRef] [Google Scholar]
  12. N Dusunceli, OU Colak, C Filiz, Mater. Design, 31(3) (2010) 1250-1255. [CrossRef] [Google Scholar]
  13. Y Zhang, G Sun, X Xu, et al., Comp. Mater. Sci., 74 (2013) 65-74. [CrossRef] [Google Scholar]
  14. M Anghileri, EC Chirwa, L Lanzi, et al., Compos. Struct., 68(1) (2005) 65-74. [CrossRef] [Google Scholar]
  15. M Sedighi, M Khandaei, H Shokrollahi, Mater. Sci. Eng. A, 527(15) (2010) 3521-3528. [CrossRef] [Google Scholar]
  16. DG Tari, MJ Worswick, J. Mater. Process Tech., 221 (2015) 40-55. [CrossRef] [Google Scholar]
  17. N Peixinho, ACM Pinho, P. I. Mech. Eng. D-J. Aut., 220(9) (2006) 1191-1198. [CrossRef] [Google Scholar]
  18. F Feng, S Huang, Z Meng, et al., Mater. Sci. Eng. A, 594 (2014) 334-343. [CrossRef] [Google Scholar]
  19. J Xiao, D W Shu, Met. Mater. Int., 21(5) (2015) 832- 831. [CrossRef] [Google Scholar]
  20. Johnson G R, Cook W H, A constitutive model and data for metals subjected to large strains, high strain rates and high temperature (The Netherlands Publishers, Hague: 1983: 541-547). [Google Scholar]
  21. Johnson GR, Cook WH, Eng. Fract. Mech., 21(1) (1985) 31-48. [CrossRef] [Google Scholar]
  22. G. R. Johnson, W. H. Cook, //Proceeding of 7th International Symposium on Ballistics. The Hague, 21(1983):541-547. [Google Scholar]
  23. M. T. Tucker, M. F. Horstemeyer, P. M. Gullett, et al., Scr. Metall., 60(3) (2009) 182-185. [CrossRef] [Google Scholar]
  24. G. Wan, B. L. Wu, Y. D. Zhang, et al., Mat. Sci. Eng. A, 527(12) (2010) 2915-2924. [CrossRef] [Google Scholar]
  25. I. R. Ahmad, D. W. Shu, //Applied Mechanics and Materials. Trans Tech Publications, 2012, 151: 726-730. [Google Scholar]
  26. Standard Test Methods for Tension Testing of Metallic Materials. [Google Scholar]
  27. Standard Test Methods of Compression Testing of Metallic Materials at Room Temperature. [Google Scholar]
  28. W. N. Sharpe Jr., Springer Handbook of Experimental Solid Mechanics(Springer, 2008). [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.