Open Access
Issue
MATEC Web Conf.
Volume 153, 2018
The 4th International Conference on Mechatronics and Mechanical Engineering (ICMME 2017)
Article Number 01001
Number of page(s) 6
Section Novel Materials and Properties
DOI https://doi.org/10.1051/matecconf/201815301001
Published online 26 February 2018
  1. Agrawal, L., Yadav, R., & Sexena, A. Effect of Magnesium Content on the Mechanical Properties of Al-Zn-Mg Alloys. Int. J. of Em. Tech., 3, 137-140 (2012) [Google Scholar]
  2. He, Z., Su, X., Peng, H., Liu, Y., Wu, C., & Wang, J. 600 °C Isothermal Section of the Al-Cr-Zn Ternary Phase Diagram. J. Alloys and Compounds., 649, 1239-1245 (2015). [CrossRef] [Google Scholar]
  3. Prabhukhot, A. Effect of Heat Treatment on Hardness and Corrosion Behavior of 6082-T6 Aluminium Alloy in Artificial Sea Water. Int. J. of Materials Science and Engineering., 3, 287-294 (2015). [Google Scholar]
  4. Eivani, A. R., Zhou, J., & Duszczyk, J. Recent Trends in Processing and Degradation of Aluminium Alloys. Rijeka: InTech. (2011). [Google Scholar]
  5. Rooy, E. L. Aluminium Alloy Castings: Properties, Processes, and Applications. Detroit: ASM International Committee. (2004). [Google Scholar]
  6. Lee, Y. S., & Kim, W. K. Recrystallization behavior of cold rolled Al-Zn-Mg-Cu fabricated by twin roll casting. Trans. Nonferrous Met. Soc. China., 24, 2226-2231 (2014). [CrossRef] [Google Scholar]
  7. Kurnia, R., & Sofyan, B.T., Effect of Cold Rolling and Annealing Temperature on The Recrystallization and Mechanical Properties of Al-4.7Zn-1.8Mg (wt. %) Alloy Fabricated by Squeeze Casting. Proc. Int.Conf. QiR., 1-6 (2017). [Google Scholar]
  8. Rambabu, P., Prasad, N., Kutumbarao, V. & Wanhill, R. ed., Aluminium Alloys for Aerospace Applications. In: Aerospace Materials and Material Technologies, 1st ed. Indian Institute of Metals Series, 36 (2017). [Google Scholar]
  9. Zhang, L., Eskin, D., Miroux, A. & Katgerman, L. Role of Solute and Transition Metals in Grain Refinement of Aluminium Alloys Under Ultrasonic Melt Treatment. TMS (The Minerals, Metals & Materials Society), 1389-1394 (2012). [Google Scholar]
  10. Kumar, A., Sharma, G., & Sasikumar, A. Effect of Cr on grain refinement and mechanical properties of Al-Si-Mg alloys. Applied Mechanics and Materials., 789-790, 95-99 (2015). [CrossRef] [Google Scholar]
  11. Lee, Y. S., & Kim, W. K. Recrystallization behavior of cold rolled Al-Zn-Mg-Cu fabricated by twin roll casting. Trans. Nonferrous Met. Soc. China., 24, 2226-2231 (2014). [CrossRef] [Google Scholar]
  12. He, Z., Su, X., Peng, H., Liu, Y., Wu, C., & Wang, J. 600 °C Isothermal Section of the Al-Cr-Zn Ternary Phase Diagram. J. of Alloys and Comp., 649, 1239-1245 (2015). [CrossRef] [Google Scholar]
  13. Liu, J., Yao, P., Zhao, N., Shi, C., Li, H., Li, X., Xi, D., & Yang, S. Effect of minor Sc and Zr on recrystallization behavior and mechanical properties of novel Al-Zn-Mg-Cu alloys. J. Alloys and Compounds., 657, 717-725 (2016). [CrossRef] [Google Scholar]
  14. Sidor, J.J., Decroos, K., Petrov R.H., & Kestens L.A.I. Particle Stimulated Nucleation in Severely Deformed Aluminium Alloys. Materials Science Forum., 706-709, 389-394 (2012). [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.