Open Access
MATEC Web of Conferences
Volume 150, 2018
Malaysia Technical Universities Conference on Engineering and Technology (MUCET 2017)
Article Number 01011
Number of page(s) 6
Section Electrical & Electronic
Published online 23 February 2018
  1. Zadeh and L. A, “Fuzzy Sets,” Information and Control, vol. 8, no. 3, pp. 338–353, 1965. [Google Scholar]
  2. L. A. Zadeh and C. A. Desoer, Linear System Theory: The State Space Approach. McGraw-Hill, 1963. [Google Scholar]
  3. S. Thongchai and K. Kawamura, “Application of Fuzzy Control to a Sonar-Based Obstacle Avoidance Mobile Robot,” Proceeding of the IEEE International Conference on Control Applications, pp. 425–430, 2000. [Google Scholar]
  4. Pedro Albertos and Antonio Sala, “Fuzzy logic controllers Advantages and drawbacks,” in IEEE Transactions On Control System, pp. 833–844. [Google Scholar]
  5. E. H. Mamdani, “Application of Fuzzy Logic to Approximate Reasoning Using Linguistic Synthesis,” IEEE Transaction Computer, vol. C–26, no. 12, pp. 1–7, 1977. [Google Scholar]
  6. D. D. B. D. Rubin, G. Baselli, G. F. Inbar, and S. Cerutti, “An Adaptive Neuro-Fuzzy Method (ANFIS) for Estimating Single-Trial Movement-Related Potentials,” Biological Cybernetics, vol. 75, pp. 63–75, 2004. [Google Scholar]
  7. L. Birglen and C. M. Gosselin, “Fuzzy Enhanced Control of an Underactuated Finger Using Tactile and Position Sensors,” Proceeding IEEE International Conference on Robotics and Automation, no. April, pp. 2320–2325, 2005. [Google Scholar]
  8. J. Jantzen, “Design Of Fuzzy Controllers,” Report Department of Automation, Technical University of Denmark, vol. 864, no. 98, pp. 1–27, 1998. [Google Scholar]
  9. S. M. Hoseini, A. J. Koshkouei, and M. Farrokhi, “Chattering Free Fuzzy Sliding Mode Controllers For Robot Manipulators,” Control, 2006. [Google Scholar]
  10. F. Nagata, Y. Kusumoto, K. Hasebe, K. Saito, M. Fukumoto, and K. Watanabe, “Post Processor Using a Fuzzy Feed Rate Generator for Multi-Axis NC Machine Tools with a Rotary Unit,” Proceeding of International Conference on Control, Automation and System, pp. 438–443, 2005. [Google Scholar]
  11. J. Jalani, “Hardware-In-The-Loop Simulation (HILS) Based Design and Evaluation of an Intelligent Gantry Crane System,” International Journal of Automation Technology, Vol. 1, No. 1, Pp. 11-19, 2007. [CrossRef] [Google Scholar]
  12. A. Bicchi, “Hands for Dexterous Manipulation And Robust Grasping: A Difficult Road Toward Simplicity,” IEEE Transactions on Robotics and Automation, vol. 16, no. 6, pp. 652–662, 2000. [CrossRef] [Google Scholar]
  13. P. Melin and O. Castillo, “A Review On The Applications of Type-2 Fuzzy Logic In Classification And Pattern Recognition,” Expert System Application, vol. 40, no. 13, pp. 5413–5423, 2013. [CrossRef] [Google Scholar]
  14. T. Doersam and O. Hammerschmidt, “An Adaptive Fuzzy Control for a Three Fingered Robot Gripper,” Proceeding of Third Australian and New Zealand Conference on Intelligent Information Systems. ANZIIS, pp. 158–163, 1995. [CrossRef] [Google Scholar]
  15. L. C. Hun, J. Djuanda, W. E. Kiong, L. C. Ying, and T. C. Looi, “DSP-Based Fuzzy Logic Controller Using Memory Based Position Recognition For Robotic Arm Manipulator,” Proceeding of the 2nd International Conference on Mechatronics, pp. 323–330, 2005. [Google Scholar]
  16. J. Jalani, “Design and Implementation of Fuzzy Logic Controller for Intelligent Gantry Crane System,” Proceeding of the 2nd International Conference on Mechatronics, pp. 345–351, 2005. [Google Scholar]
  17. L. Suganthi, S. Iniyan, and A. A. Samuel, “Applications of Fuzzy Logic In Renewable Energy Systems – A Review,” Renewable and Sustainable Energy Reviews, vol. 48, pp. 585–607, 2015. [CrossRef] [Google Scholar]
  18. S. Lee, D. Kim, and G. Park, “Identification of Nonlinear Dynamic Systems via the Neuro-Fuzzy Computing and Genetic Algorithms,” Proceeding of International Conference on Control, Automation and System, pp. 1892–1896, 2005. [Google Scholar]
  19. V. V. K. Reddy and M. Sydulu, “Fuzzy and Genetic Approach for Optimal Capacitor Placement in Distribution Systems,” 2006. [Google Scholar]
  20. P. P. Bonissone, “Adaptive Neural Fuzzy Inference Systems (ANFIS): Analysis and Applications,” pp. 1–41, 2002. [Google Scholar]
  21. M. A. Ahmad, R. Mohd, T. Raja, M. S. Ramli, M. A. Zawawi, and M. H. Suid, “Composite PD and Fuzzy Logic Approach for Vibration of Elastic Joint Manipulator,” International Conference on Control, Automation and Systems, 2010. [Google Scholar]
  22. I. H. Akyuz, Z. Bingul, and S. Kizir, “Cascade Fuzzy Logic Control of A Single-Link Flexible-Joint Manipulator,” Turkish Journal of Electrical Engineering and Computer Sicence, vol. 20, no. 5, pp. 713–726, 2012. [Google Scholar]
  23. K. Groves and A. Serrani, “Modeling and Nonlinear Control of a Single-Link Flexible Joint Manipulator,” no. 3, p. 13, 2010. [Google Scholar]
  24. D. Sendrescu, “Nonlinear Identification of a Rotary Flexible Joint Experiment.” [Google Scholar]
  25. M. Rostami Kandroodi, M. Mansouri, M. Aliyari Shoorehdeli, and M. Teshnehlab, “Control of Flexible Joint Manipulator via Reduced Rule-Based Fuzzy Control with Experimental Validation,” ISRN Artificial Intelligence, vol. 2012, pp. 1–8, 2012. [CrossRef] [Google Scholar]
  26. R. A. Koshy and S. Thomas, “A Two-surface Discrete Sliding Mode Control based on Approach Angle Reaching Law,” Proceeding of the International Multiconference of Engineers and Computer Scientists, vol. 2, 2012. [Google Scholar]
  27. S. Yurkovich, S. Yurkovich, K. M. Passino, and K. M. Passino, “A Laboratory Course On Fuzzy Control,” Educatiom IEEE Transaction, vol. 42, no. 1, pp. 15–21, 1999. [CrossRef] [Google Scholar]
  28. S. Yurkovich and K. M. Passino, Fuzzy Control. Addison Wesley Longman, 1998. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.