Open Access
Issue
MATEC Web Conf.
Volume 149, 2018
2nd International Congress on Materials & Structural Stability (CMSS-2017)
Article Number 01088
Number of page(s) 5
Section Session 1 : Materials & Pathologies
DOI https://doi.org/10.1051/matecconf/201814901088
Published online 14 February 2018
  1. W.C. Feist and D.N.S. Hon, Chemistry of Weathering and Protection (American Chemical Society, 1984)
  2. M.K. Yalinkilic, R. Ilhan, Y. Imamura, M. Takahashi, Z. Demirci, A.C. Yalinkilic and H. Peker, J. Wood Sci. 45, 502 (1999) [CrossRef]
  3. J. Zhang and P.D. Kamdem, Weathering of copper-amine treated wood (IRG, Kona, Hawaii, 2000)
  4. B. George, E. Suttie, A. Merlin and X. Deglise, Polymer Degradation and Stability 88, 268 (2005) [CrossRef]
  5. J. Zhang, P. Kamdem, A. Temiz, Applied Surface Science 256, 842 (2009) [CrossRef]
  6. V. Jirous-Rajkovic and H. Turkulin, Drvna Industrija 53, 9 (2002)
  7. V. Jirous-Rajkovic, A. Bogner and D. Radovan, Surface Coat International Part B - Coat Trans 87, 15 (2004) [CrossRef]
  8. E. Scrinzi, S. Rossi, F. Deflorian and C. Zanella, Prog. Org. Coat. 72, 81 (2011) [CrossRef]
  9. G. Grüll, M. Truskaller, L. Podgorski, S. Bollmus and F. Tscherne, Eur. J. Wood Prod. 69, 443 (2011) [CrossRef]
  10. T. Turkoglu, E. Baysal, I. Kureli, H. Toker and M. E. Ergun, Wood research 60, 833 (2015)
  11. P.R.Kerber, D.M. Stangerlin, E. Pariz, R.R. de Melo, A.P. de Souza and L. Calegari, Nativa, Sinop, 4, 303 (2016) [CrossRef]
  12. A. Temiz, U.C. Yildiz, I. Aydin, M. Eikenes, G. Alfredsen, G. Colakoglu, Applied Surface Science 250, 35 (2005) [CrossRef]
  13. S. Zahri, C. Belloncle, F. Charrier, P. Pardon, S. Quideau and B. Charrier, Applied Surface Science 253, 4985 (2007) [CrossRef]
  14. N. Çakıcıer, S. Korkut, D.S. Korkut, A. Kurtoğlu and A. Sönmez, International Journal of the Physical Sciences 6, 1929 (2011)
  15. E. Baysal, E.D. Tomak, M. Ozbeyc and E. Altinc, Coloration Technology 130, 140 (2013) [CrossRef]
  16. R.F. Teles, A.F. da Costa. Colorimetric evaluation of three tropical woods after accelerated weathering (45th IRG, St George, Utah, USA, 2014)
  17. T. Krystofiak, B. Lis, M. Muszyńska, S. Proszyk, Drewno, 59, 127 (2016)
  18. E. Baysal, E.D. Tomak, E. Topaloglu, E. Pesman, Maderas. Ciencia y tecnología 18, 253 (2016)
  19. M. Yalcin, H. Pelit, C. Akcay and N. Cakicier, Coloration Technology 133, 334 (2017) [CrossRef]
  20. N. Gierlinger, D. Jacques, M. Grabner, R. Wimmer, M. Schwanninger, P. Rozenberg and L.E. Pâques, Trees 18,102 (2004) [CrossRef]
  21. A.J.V. Zanuncio, J.P. Motta, T.A. DA Silveira, E.S. Farias and P.F. Trugilho, BioResources 9, 293 (2014)
  22. A.J.V. Zanuncio, A.G. Carvalho, M.T. de Souza, C.M. Jardim, A. de C.O. Carneiro, J.L. Colodette, Maderas Ciencia y tecnología 17, 857 (2015)
  23. N. Ayadi, F. Lejeune, F. Charrier, B. Charrier and A. Merlin, Holz als Roh-und Werkstoff 61, 221 (2003)
  24. P; Bekhta and P. Niemz, Holzforschung 57, 539 (2003) [CrossRef]
  25. A.L. Piedade S.M. Pincelli, L.F. de Moura, J.O. Brito, Maderas. Ciencia y tecnología, 14, 239 (2012) [CrossRef]
  26. P.H.G. de Cademartori, E. Schneid, D.A. Gatto, D.M. Stangerlin and R. Beltrame. Maderas Ciencia y tecnología 15, 57 (2013)
  27. Z. Demirci, A. Sönmez and M. Budakç, BioResources 8,1852 (2013) [CrossRef]
  28. E. Baysal, T. Turkoglu, E. Gavcar, H. Toker, A. Gunduz, M. Kucuktuvek, H. Peker and D. K. Bayraktar, Wood research 62, 737 (2017)
  29. A. Sonmez, M. Budakci and M. Bayram, Scientific Research and Essay 4, 1432 (2009)
  30. J. Gérard, D. Guibal, S. Paradis, M. Vernay, J. Beauchêne, L. Brancheriau and A. Thibaut, (Tropix 7 Version 7.5.1 CIRAD 2011). https://doi.org/10.18167/74726f706978

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.