Open Access
MATEC Web Conf.
Volume 149, 2018
2nd International Congress on Materials & Structural Stability (CMSS-2017)
Article Number 01037
Number of page(s) 4
Section Session 1 : Materials & Pathologies
Published online 14 February 2018
  1. Yahia A., Tanimura M., Shimoyama Y., Réological properties of highly flowable mortar containing limestone filler-effect of powder content and w/c ratio cement and concrete research, 35, 532-539,(2005). [CrossRef] [Google Scholar]
  2. Bonavetti V., Donza H., Rahhal V., Irassar E., Influence of initial curing on the properties of concrete containing limestone blended cement, Cement and Concrete Research, 30, 703-708, (2000). [CrossRef] [Google Scholar]
  3. Menendez G., Bonavetti V., Irassar EF., Strength development of ternary blended cement with limestone filler and blast-furnace slag, Cement and Concrete Composition, 25, 61–67, (2001). [Google Scholar]
  4. Zhang X., Han J., The effect of ultra-fine admixture on the rheological property of cement paste, Cement and Concrete Research, 30, 827–30, (2000). [CrossRef] [Google Scholar]
  5. Tsivilis S., Chaniotakis E., Badogiannis E., Pahoulasa G., Ilias A., A study on the parameters affecting the properties of Portland limestone cements, Cement and Concrete Composites, 21, 107–116,(1999). [CrossRef] [Google Scholar]
  6. Lin F., Meyer C., Hydration kinetics modeling of Portland cement considering the effects of curing temperature and applied pressure, Cement and Concrete Research, 39, 255–265, (2009). [CrossRef] [Google Scholar]
  7. Soroka I., Stern N., Calcareous fillers and the compressive strength of Portland cement, cement and concrete research, 6, 367-376,(1976). [CrossRef] [Google Scholar]
  8. Lothenbach B., Le Saout G., Gallucci E., Scrivener K., Influence of limestone on the hydration of Portland cements, Cement and Concrete Research, 38, 848–860,(2008). [Google Scholar]
  9. Mounanga P., Irfan M., Khokhar A., Elhachem Rana loukili A., Improvement of the early-age reactivity of fly ash and blast furnace slag cementations systems using limestone filler, Materials and structures, 44, 437 – 453,(2011). [CrossRef] [Google Scholar]
  10. Tsivilis S., Chaniotakis E., Kakali G., Batis G., An analysis of the properties of Portland limestone cements and concrete, Cement and Concrete Composites, 24, 371–378,(2002). [Google Scholar]
  11. Heikel M., El-didamony H., Morsy M.S., limestone filled pozzolanic cement, Cement and Concrete Research, 30,1827-1834, (2000). [CrossRef] [Google Scholar]
  12. Puertas F., Santos H., Palacios M., Martınez-Ramιrez S., Polycarboxylate superplasticiser admixtures: effect on hydration, microstructure and rheological behaviour in cement pastes, Advances in Cement Research, 17, No. 2, 77–89, (2005). [CrossRef] [Google Scholar]
  13. Bjornstrom J., Chandra S., Effect of superplasticizers on the rheological properties of cements, Materials and Structures / Matériaux et Constructions,36, 685-692, (2003). [CrossRef] [Google Scholar]
  14. Aiad I., Influence of time addition of superplasticizers on the rheological properties of fresh cement pastes, Cement and Concrete Research, 33, 1229 – 1234, (2003). [CrossRef] [Google Scholar]
  15. Golaszewki JG., Szwabowski J., Influence of superplasticizers on rheological behaviour of fresh cement mortars, Cement and Concrete Research, 34, 235-248,(2004). [Google Scholar]
  16. Heikal M., Morsy M.S., Aiad I, Effect of treatment temperature on the early hydration characteristics of superplasticized silica fume blended cement pastes, Cement and Concrete Research, 35, 680-687, (2005). [CrossRef] [Google Scholar]
  17. Courrazé G., Grossiord JL., Initiation à la rhéologie, Tec& Doc, (2000). [Google Scholar]
  18. Nawa T., Eguchi H., Effect of cement characteristics on the fluidity of cement paste containing an organic admixture, Proceedings of the 9th International Congress on the Chemistry of Cements, 4, 597-603, (1992). [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.