Open Access
Issue
MATEC Web Conf.
Volume 149, 2018
2nd International Congress on Materials & Structural Stability (CMSS-2017)
Article Number 01036
Number of page(s) 5
Section Session 1 : Materials & Pathologies
DOI https://doi.org/10.1051/matecconf/201814901036
Published online 14 February 2018
  1. H. Okamura, M. Ouchi, J Adv Concr Technol, 1(1):5–15 (2003) [CrossRef] [Google Scholar]
  2. D. Bonen D.S.P. Shah S. P, Prog Struct Eng Mater, 7:14–26 (2005) [CrossRef] [Google Scholar]
  3. M.E. Barrak, M. Mouret, A. Bascoul,J Cem Concr Compos. 31(1):12–21, (2009) [CrossRef] [Google Scholar]
  4. P. Nanthagopalan and M. Santhanam, Const. Build. Mater. 23(11):3443–9 (2009) [CrossRef] [Google Scholar]
  5. Bouzoubaa N and Lachemi M, “Self-compacting concrete incorporating high volumes of class F fly ash: Preliminary results”, Cement and Concrete Research, 31, 413–420 (2001) [CrossRef] [Google Scholar]
  6. M. Guendouz, F. Debieb and E. H. Kadri, 33èmes roncontres de l’AUGC, ISABTP/UPPA, Anglet, 27 au 29 Mai 2015, Bayonne, France, (2015), p. 1-8. [Google Scholar]
  7. P. Dinakar,K G. Babu and M. Santhanam, Cement & Concrete Composites, 30, 880–886 (2008) [CrossRef] [Google Scholar]
  8. L. Coppola, T. Cerulli, and D. Salvioni, 11th International Conference on Fracture ICF11, Volume 3, pp. 2226-2241 (2005) [Google Scholar]
  9. M. Guendouz, F. Debieb, O. Boukendakdji, E. H. Kadri, M. Bentchikou and H. Soualhi, J. Meter. and Env. Scien., 7(2), (2016), 227-232. [Google Scholar]
  10. A.N. Bin Ibrahim, P. Bin Ismail and M. Forde, International Atomic Energy Agency, Vienna (2002) [Google Scholar]
  11. J. Delacour and J.M. Geoffray, "Résultats et recommandations du projet national CALIBÉ : La maitrise de la qualité des bétons", Presses de l’école nationale des Ponts et Chaussées, Paris, France (2004) [Google Scholar]
  12. D. Breysse, M. Larget, Z. Sbartai, J. Lataste and J.P.Balayssac, 7th International Symposium on Non-destructive Testing in Civil Engineering, Nantes, France, 8p (2009) [Google Scholar]
  13. V.M. Malhotra and N.J. Carino, “Handbook on Nondestructive Testing of Concrete”, 2nd Edition, .ASTM International, CRC Press (1991) [Google Scholar]
  14. M. Nehdi,H.E Chabib, and A. Naggar, “Predicting Performance of Self-Compacting Concrete Mixtures Using Artificial Neural Networks”, ACI Mat. J., vol. 98, no. 5, pp. 394–401 (2001) [Google Scholar]
  15. D. Breysse and O. Abraham, "Méthodologie d’évaluation non destructive de l’état d’altération des ouvrages en béton", Presses de l’école nationale des Ponts et Chaussées, Paris, France (2005) [Google Scholar]
  16. M. Yurugi, “Application of self-compacting concrete in Japan”, Proceedings 23rd OWICS Conference, CI-Premier Ptc Ltd., Singapore, August 25– 26, pp. 29– 42 (1998) [Google Scholar]
  17. O. Petersson, Cem. Concr. Res. Inst. 54 (2), 5 pp (1998) [Google Scholar]
  18. Y. Klug and K. Holschemacher, “Comparison of the hardened properties of Self-Compacting and Normal Vibrated Concrete”, 3rd International Symposium on Self-Compacting Concrete, Reykjavik, Iceland, pp. 596-605 (2003) [Google Scholar]
  19. J. Blitz and G. Simpson, “Ultrasonic Methods of Non-Destructive Testing”, London: Chapman and Hall (1996) [Google Scholar]
  20. H.Y. Qasrawi, Cement and Concrete Research, Vol.30, pp.739-746 (2000) [CrossRef] [Google Scholar]
  21. B. Hobbs and K.M. Tchoketch, Forensic Science International, Vol.167, pp.167-172 (2007) [CrossRef] [Google Scholar]
  22. A.B. Khodja A. B, “Corrélation entre essais non destructifs et essais destructifs du béton à faible résistance", Master theses, University of Hassiba Ben Bouali, Chlef, Algeria (2010) [Google Scholar]
  23. DJ. Boukhelkhal, S. Kenai and F. Debieb, "Corrélation entre essais non destructifs et essais destructifs de la résistance du béton (Scléromètre & Ultrason)", International Symposium on Nondestructive Testing in Civil Engineering DIAGNOBETON, Toulouse, France, 6p (2014) [Google Scholar]
  24. O. Boukendakdji,E.H. Kadri, S. Kenai, Cement & Concrete Composites 34; 583–590 (2012) [CrossRef] [Google Scholar]
  25. AFGC, Association Française de Génie Civil, "Recommandations pour l’emploi des Bétons autoplaçant" (2008) [Google Scholar]
  26. NF EN 12504-4 (2005), "Essais pour béton dans les structures. Partie 4 : Détermination de la vitesse de propagation du son", AFNOR. [Google Scholar]
  27. NF EN 12390-3 (2003), "Essai pour béton durci. Partie 3 : Résistance à la compression des éprouvettes", AFNOR. [Google Scholar]
  28. M. Uysal and K. Yilmaz, Cement and Concrete Composites J., Vol. 33,(2011),pp.771-6. [CrossRef] [Google Scholar]
  29. Y. Edamatsu, T. Sugamata and M. Ouchi, “A mixdesign method for self-compacting concrete based on mortar flow and Funnel tests”. In: Proceedings of 3rd international symposium on self-compacting concrete, Reykjavik, Iceland, (2003) p. 345–55. [Google Scholar]
  30. U. Mucteba, S. Mansur, Construction and Building Materials J., Vol.25, (2011),pp. 4112–4120. [CrossRef] [Google Scholar]
  31. I. Türkmen,A. Aliöz and A.Cüneyt, Scientific Research and Essays J., Vol. 5(15), (2010),pp. 2055-2064. [Google Scholar]
  32. E. Guneyisi and M. Gesoglu, Materials and Structures J., Vol. 41, (2008), pp. 479–493. [CrossRef] [Google Scholar]
  33. K. Tharmaratnam and B.S. Tan, Cement and Concrete Res. 20: (1990). 335-345. [CrossRef] [Google Scholar]
  34. R. Demirboğa and M.R. Türkmen Karakoç, (2004), Cement Concrete Res. 34: 2329-2336. [CrossRef] [Google Scholar]
  35. Z.C. Ulucan, K. Turk and M. Karatas, Russian Journal of Nondestructive Testing, Vol. 44, N°5, (2008) pp. 367–74. [CrossRef] [Google Scholar]
  36. C.U. Zulfu, T. Kazim and K. Mehmet, Russ. J. Nondestructive Test 44, pp. 367–374, (2008). [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.