Open Access
Issue
MATEC Web Conf.
Volume 147, 2018
The Third International Conference on Sustainable Infrastructure and Built Environment (SIBE 2017)
Article Number 04010
Number of page(s) 7
Section Water and Waste Engineering and Management
DOI https://doi.org/10.1051/matecconf/201814704010
Published online 22 January 2018
  1. Sugiri. Penggunaan Terak Nikel sebagai Agregat dan Campuran Semen untuk Beton Mutu Tinggi. Thesis Program Magister, Program Studi Teknik Sipil, Institut Teknologi Bandung, (2005). [Google Scholar]
  2. Wilk, C. Solidification/Stabilization Treatment and Examples of Use at Port Facilities. (2004). https://doi.org/ 10.1061/40727(2004)92 [Google Scholar]
  3. Zhang, S. P., & Zong, L. Evaluation of Relationship between Water Absorption and Durability of Concrete Materials, (2014). https://doi.org/10.1155/2014/650373 [Google Scholar]
  4. El Akmam, M.T. Leachability of Chromium and Cadmium Heavy Metals from Nickel Slag Utilization as Concrete Floors Aggregate Constituent with Solidification Method. Final Project for Bachelor Degree, Environmental Engineering Study Program, Institut Teknologi Bandung, (2017) [Google Scholar]
  5. ASTM C128-97, Standard Test Method for Specific Gravity and Absorption of Fine Aggregate, ASTM International, West Conshohocken, PA, (1997), www.astm.org [Google Scholar]
  6. ASTM C114-07, Standard Test Methods for Chemical Analysis of Hydraulic Cement, ASTM International, West Conshohocken, PA, (2007), www.astm.org [Google Scholar]
  7. Badan Standardisasi Nasional. SNI 13-6793-2002 Metode Pengujian Kadar Air, Kadar Abu dan Bahan Organik dari Tanah Gambut dan Tanah Organik Lainnya. (2002) [Google Scholar]
  8. Badan Standardisasi Nasional. SNI 6-2464-1991 Metode Ekstraksi Logam Total. (1991) [Google Scholar]
  9. ASTM C128-97, Standard Test Method Sieve Analysis of Fine and Coarse Aggregates, ASTM International, West Conshohocken, PA, (1997), www.astm.org [Google Scholar]
  10. ASTM C191-04-a, Standard Test Method for Time of Setting of Hydraulic Cement by Vicat Needle, ASTM International, West Conshohocken, PA, (2004), www.astm.org [Google Scholar]
  11. ASTM C 642-06, Standard Test Method for Compressive Strength of Hydraulic Cement Mortars Cube Specimens, ASTM International, West Conshohocken, PA, (2007), www.astm.org [Google Scholar]
  12. ASTM C 642-06, Standard Test Method for Density, Absorption, and Voids in Hardened Concrete, ASTM International, West Conshohocken, PA, (2006), www.astm.org [Google Scholar]
  13. ASTM D 4843-88 R09, Standard Test Method for Wetting and Drying Test of Solid Waste, ASTM International, West Conshohocken, PA, (2009), www.astm.org [Google Scholar]
  14. US EPA SW-846 Test Method 1311, Toxicity Characteristic Leaching Procedur. (1992). https://www.epa.gov/hw-sw846/sw-846-test-method-1311-toxicity-characteristic-leaching-procedure [Google Scholar]
  15. ASTM D3987-12, Standard Practice for Shake Extraction of Solid Waste with Water, ASTM International, West Conshohocken, PA, (2012), www.astm.org [Google Scholar]
  16. Badan Standardisasi Nasional. SNI 03-6468-2000 Tata Cara Perencanaan Campuran Beton Berkekuatan Tinggi dengan Semen Portland dan Abu Terbang, (2000) [Google Scholar]
  17. H.Kosmatka, S., & L. wilson, M. Design and Control of Concrete Mixtures. Construction. Retrieved from http://www.cement.org/bookstore/supporting/cd100/EB001Frt.pdf. (2011) [Google Scholar]
  18. Al-Jabri, K. S., Hisada, M., Al-Oraimi, S. K., & Al-Saidy, A. H. Copper slag as sand replacement for high performance concrete. Cement and Concrete Composites, 31(7), 483–488, (2009) https://doi.org/10.1016/j.cemconcomp.2009.04.007 [CrossRef] [Google Scholar]
  19. ACI Committee 318. Guide for Concrete Floors and Slab Construction: (ACI 302.1R-96). Farmington Hills, MI: American Concrete Institute, (1995). [Google Scholar]
  20. Wu, W., Zhang,W., Ma, G. Optimum content of copper slag as a fine aggregate in high strength concrete. Journal of Material and Design, 2878-2883.(2010) [CrossRef] [Google Scholar]
  21. Pacheco-Torgal, F., Jalali, S., Labrincha, J., & John, V. Eco-efficient concrete. Cambridge: Wodhead Publishing Limited.(2013) [CrossRef] [Google Scholar]
  22. Tandon, G. Durability and Permeability of Concrete. India.(2005) [Google Scholar]
  23. Wiles, C. A review of solidification/stabilization technology. Journal of Hazardous Materials, 5-21.(1987) [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.