Open Access
| Issue |
MATEC Web Conf.
Volume 131, 2017
UTP-UMP Symposium on Energy Systems 2017 (SES 2017)
|
|
|---|---|---|
| Article Number | 03010 | |
| Number of page(s) | 6 | |
| Section | Energy management and conservation | |
| DOI | https://doi.org/10.1051/matecconf/201713103010 | |
| Published online | 25 October 2017 | |
- M. M. Nemat-Alla, M. H. Ata, M. R. Bayoumi, and W. Khair-Eldeen, “Powder metallurgical fabrication and microstructural investigations of aluminum/steel functionally graded material,” Materials Sciences and Applications, vol. 2, p. 1708, 2011. [CrossRef] [Google Scholar]
- J. Groves and H. Wadley, “Functionally graded materials synthesis via low vacuum directed vapor deposition,” Composites Part B: Engineering, vol. 28, pp. 57–69, 1997. [CrossRef] [Google Scholar]
- Y. Watanabe, Y. Inaguma, H. Sato, and E. Miura-Fujiwara, “A novel fabrication method for functionally graded materials under centrifugal force: the centrifugal mixed-powder method,” Materials, vol. 2, pp. 2510–2525, 2009. [CrossRef] [Google Scholar]
- B. Kieback, A. Neubrand, and H. Riedel, “Processing techniques for functionally graded materials,” Materials Science and Engineering: A, vol. 362, pp. 81–106, 2003. [CrossRef] [Google Scholar]
- X. Lin and T. Yue, “Phase formation and microstructure evolution in laser rapid forming of graded SS316L/Rene88DT alloy,” Materials Science and Engineering: A, vol. 402, pp. 294–306, 2005. [CrossRef] [Google Scholar]
- D. W. Hutmacher, M. Sittinger, and M. V. Risbud, “Scaffold-based tissue engineering: rationale for computer-aided design and solid free-form fabrication systems,” TRENDS in Biotechnology, vol. 22, pp. 354–362, 2004. [Google Scholar]
- Y. T. Pei and J. T. M. De Hosson, “Functionally graded materials produced by laser cladding,” Acta materialia, vol. 48, pp. 2617–2624, 2000. [CrossRef] [Google Scholar]
- M. Ivosevic, R. Knight, S. Kalidindi, G. Palmese, and J. Sutter, “Solid particle erosion resistance of thermally sprayed functionally graded coatings for polymer matrix composites,” Surface and Coatings Technology, vol. 200, pp. 5145–5151, 2006. [CrossRef] [Google Scholar]
- K. A. Mumtaz and N. Hopkinson, “Laser melting functionally graded composition of Waspaloy® and Zirconia powders,” Journal of materials science, vol. 42, pp. 7647–7656, 2007. [CrossRef] [Google Scholar]
- M. Erdal, S. Dag, Y. Jande, and C. Tekin, “Manufacturing of functionally graded porous products by selective laser sintering,” in Materials Science Forum, 2010, pp. 253-258. [Google Scholar]
- M. M. Gasik, “Functionally graded materials: bulk processing techniques,” International Journal of Materials and Product Technology, vol. 39, pp. 20–29, 2010. [CrossRef] [Google Scholar]
- M. A. Boboulos, CAD-CAM & rapid prototyping application evaluation: Bookboon, 2010. [Google Scholar]
- W. Pompe, H. Worch, M. Epple, W. Friess, M. Gelinsky, P. Greil, et al., “Functionally graded materials for biomedical applications,” Materials Science and Engineering: A, vol. 362, pp. 40–60, 2003. [CrossRef] [Google Scholar]
- F. Watari, A. Yokoyama, M. Omori, T. Hirai, H. Kondo, M. Uo, et al., “Biocompatibility of materials and development to functionally graded implant for bio-medical application,” Composites Science and Technology, vol. 64, pp. 893–908, 2004. [CrossRef] [Google Scholar]
- L. Marin, “Numerical solution of the Cauchy problem for steady-state heat transfer in two-dimensional functionally graded materials,” International Journal of Solids and Structures, vol. 42, pp. 4338–4351, 2005. [CrossRef] [Google Scholar]
- M. Malinina, T. Sammi, and M. M. Gasik, “Corrosion resistance of homogeneous and FGM coatings,” in Materials Science Forum, 2005, pp. 305-310. [Google Scholar]
- H.-S. Shen, Functionally graded materials: nonlinear analysis of plates and shells: CRC press, 2016. [Google Scholar]
- R. Javaheri and M. Eslami, “Thermal buckling of functionally graded plates based on higher order theory,” Journal of thermal stresses, vol. 25, pp. 603–625, 2002. [CrossRef] [EDP Sciences] [Google Scholar]
- Y.-L. Chung and W.-T. Chen, “Bending behavior of FGM-coated and FGM-undercoated plates with two simply supported opposite edges and two free edges,” Composite Structures, vol. 81, pp. 157–167, 2007. [CrossRef] [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.