Open Access
MATEC Web Conf.
Volume 128, 2017
2017 International Conference on Electronic Information Technology and Computer Engineering (EITCE 2017)
Article Number 05012
Number of page(s) 5
Section Electromechanical Technologies
Published online 25 October 2017
  1. Anthony T.C., Goh et al. (1995). “Estimation of lateral wall movements in braced excavations using neural networks.” Can. Geotech. J., 32, 1059–1064 [EDP Sciences] [Google Scholar]
  2. Arslan, A., and Ince, R. (1996). “Neural network-based design of edge-supported reinforced concrete slabs.” Structural Engineering Review, 8(4), 329–335 [Google Scholar]
  3. Ashraf M., Elazouni et al. (1997). “Estimating resource requirements at conceptual stage using neural networks.” Journal of Computing in Civil Engineering, 11(4) [Google Scholar]
  4. Chen, S., and Shan, K. (1992). “Neural networks in dynamic analysis of bridges.” Proc., 8th Annual Conference of Computing in Civil Engineering, ASCE, 1058–1065 [Google Scholar]
  5. Drysdale, R.G., and Hamid, A.A. (1984). “Tension failure criteria for plain concrete masonry.” Journal of Structural Engineering, ASCE, 110(2), 228–244 [CrossRef] [Google Scholar]
  6. Flood, I. and Kartam N. (1994). “Neural networks in civil engineering. I: Principles and understanding. II: Systems and application”. Journal of Computing in Civil Engineering, 8(2) [Google Scholar]
  7. Garrett, J.H., Jr., Ghaboussi, J., Wu, X., and Ranjithan, S. (1992). “Neural networks and their application to civil engineering.” Expert systems in civil engineering-Knowledge representation, R. H. Allen, ed., Expert Systems Committee of ASCE, New York [Google Scholar]
  8. Ghaboussi, J., Garrett, J.H., Jr., and Wu, X. (1991). “Knowledge-based modeling of material behavior with neural networks.” J. Eng. Mech., 117(1), 132–153 [CrossRef] [Google Scholar]
  9. Haykin, S. (1994). “Neural networks: a comprehensive foundation.” New York, Macmillan [Google Scholar]
  10. Hsu, D.S., Yeh, I.C., and Lian, W.T. (1993). “Artificial neural damage detection of existing structure.” Proc., 3rd ROC and Japan Seminar on Natural Hazards Mitigation, Tainan, 423–436 [Google Scholar]
  11. Larry, M. et al. (1997). “Finite-element mesh generation using self-organizing neural networks.” Microcomputers in Civil Engineering, 12, 233–250 [CrossRef] [Google Scholar]
  12. Liu, L.P., Tang, D.X., and Zhai, X.M. (2006). “Failure criteria for grouted concrete block masonry under biaxial compression.” Advances in Structural Engineering, 9(2), 229–239 [CrossRef] [Google Scholar]
  13. Mathew, A., Kumar, B., Sinha, B.P., and Pedreschi, R.F. (1999). “Analysis of masonry panel under biaxial bending using ANNs and CBR.” Journal of Computing in Civil Engineering, 170–177 [CrossRef] [Google Scholar]
  14. Mukherjee, A. et al. (1996). “Prediction of buckling load of columns using artificial neural networks.” Journal of Structural Engineering, 122(11) [Google Scholar]
  15. Rafiq, M.Y., Bugmann, G., and Easterbrook, D.J. (1998). “Artificial neural networks for modelling some of the activities of the conceptual stage of the design process.” ASCE Computing Congress, 1998 [Google Scholar]
  16. Sarkar, P. (2000). “A brief history of cellular automata.” ACM Comput. Surveys, 32(1), 80–107 [CrossRef] [Google Scholar]
  17. Smith, M. (1994). “Neural networks for statistical modeling.” Van Nostrand Reinhold, NY, 235 [Google Scholar]
  18. Maerivoet, S., and Moor, B.D. (2005). “Cellular automata models of road traffic.” Physics Reports, 419, 1–64 [CrossRef] [MathSciNet] [Google Scholar]
  19. Tsai, C.H., and Hsu, D.S. (1997). “Reinforced concrete structural damage diagnosis by using artificial neural network.” Proc., Intelligent Information System, IEEE Computer Society, Los Alamitos, Calif., 149–155 [Google Scholar]
  20. Tsai, C.H., and Hsu, D.S. (2002). “Diagnosis of reinforced concrete structural damage base on displacement time history using the back-propagation neural network technique.” Journal of Computing in Civil Engineering, 16(1), 49–58 [CrossRef] [Google Scholar]
  21. Von Neumann, J. (1966). Theory of Self Reproducing Automata, Burks, A., ed., University of Illinois Press, Champaign, Ill. 305–317 [Google Scholar]
  22. Zhou, G.C. (2002). “Application of stiffness/strength corrector and cellular automata in predicting response of laterally loaded masonry panels.” Ph.D. thesis, University of Plymouth, U.K [Google Scholar]
  23. Zhou, G.C., Rafiq, M.Y., Bugmann, G.C., and Easterbrook, D.J. (2006). “Cellular automata model for predicting the cracking pattern of laterally loaded masonry wall panels.” Journal of Computing in Civil Engineering, 20(6), 400–409 [CrossRef] [Google Scholar]
  24. Zhou, G.C., Rafiq, M.Y., Easterbrook, D.J. and Bugmann, G.C. (2003). “Application of cellular automata in modeling laterally loaded masonry panel boundary effects.” Masonry Int., 16(3), 104–114 [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.