Open Access
MATEC Web Conf.
Volume 120, 2017
International Conference on Advances in Sustainable Construction Materials & Civil Engineering Systems (ASCMCES-17)
Article Number 04003
Number of page(s) 13
Section Fiber Reinforced Construction Materials
Published online 09 August 2017
  1. M. A. Mansur, K. C. G. Ong, & P. Paramasivam., Shear strength of fibrous concrete beams without stirrups. Journal of Structural Engineering, 112(9), 2066–2079, (1986). [CrossRef] [Google Scholar]
  2. A.K. Sharma., Shear strength of steel fiber reinforced concrete beams. In ACI Journal Proceedings, Vol. 83, No. 4. (1986). [Google Scholar]
  3. R. Narayanan, & I. Y. S. Darwish, (1987)., Use of steel fibers as shear reinforcement. ACI Structural Journal, Vol. 84(3). [Google Scholar]
  4. S. A. Ashour, G. S. Hasanain, & F. F. Wafa., Shear behavior of high-strength fiber reinforced concrete beams. ACI Structural Journal, Vol. 89(2), (1992). [Google Scholar]
  5. V. C. Li, R. Ward, & A. M. Hmaza, (1992). Steel and synthetic fibers as shear reinforcement. ACI Materials Journal, Vol. 89(5), (1992). [Google Scholar]
  6. K. H. Tan, K. Murugappan, & P. Paramasivam., Shear behavior of steel fiber reinforced concrete beams. Structural Journal, Vol. 90(1), 3–11, (1993). [Google Scholar]
  7. M. Imam, L. Vandewalle, F. Mortelmans, & D. Van Gemert., Shear domain of fibre-reinforced high-strength concrete beams. Engineering structures, Vol. 19(9), 738–747, (1997). [CrossRef] [Google Scholar]
  8. Y. K. Kwak, M. O. Eberhard, W. S. Kim, & J. Kim., Shear strength of steel fiber-reinforced concrete beams without stirrups. ACI Structural Journal, Vol. 99(4), (2002). [Google Scholar]
  9. S. H. Cho, & Y. I. Kim., Effects of steel fibers on short beams loaded in shear. Structural journal, vol. 100(6), 765–774, (2003). [Google Scholar]
  10. C. Cucchiara, L. La Mendola, & M. Papia., Effectiveness of stirrups and steel fibres as shear reinforcement. Cement and Concrete Composites, vol. 26(7), 777–786, (2004). [CrossRef] [Google Scholar]
  11. D. R. Sahoo, & N. Kumar., Monotonic behavior of large-scale SFRC beams without stirrups. Engineering Structures, vol. 92, 46–54, (2015). [CrossRef] [Google Scholar]
  12. D. R. Sahoo, S. Bhagat, & T. C. V. Reddy., Experimental study on shear-span to effective-depth ratio of steel fiber reinforced concrete T-beams. Materials and Structures, vol. 49(9), 3815–3830, (2016). [CrossRef] [Google Scholar]
  13. ACI 318-08, Building code requirements for structural concrete (ACI 318-08) and commentary, American Concrete Institute, Farmington Hills, MI, (2008) [Google Scholar]
  14. R. Park, & T. Paulay., Reinforced concrete structures. John Wiley & Sons, (1975). [CrossRef] [Google Scholar]
  15. J. G. MacGregor, J. K. Wight, S. Teng, & P. Irawan., Reinforced concrete: mechanics and design (Vol. 3). Upper Saddle River, NJ: Prentice Hall, (1997). [Google Scholar]
  16. G. Winter, & A. Nilson., Design of concrete structure, 9th ed., McGraw Hill, New York, (1986). [Google Scholar]
  17. M. Khuntia, B. Stojadinovic, & S. C. Goel., Shear strength of normal and high-strength fiber reinforced concrete beams without stirrups. Structural Journal, Vol 96(2), 282–289, (1999). [Google Scholar]
  18. L. Vandewalle., Design method for steel fiber reinforced concrete proposed by RILEM TC 162-TDF. In P. Rossi, & G. Chanvillard (Eds.), Fifth International RILEM Symposium on Fibre-Reinforced Concrete (FRC) (pp. 51–64). RILEM Publications SARL, (2000). [Google Scholar]
  19. L. Vandewalle., RILEM TC162-TDF: Test and Design methods for Steel Fibre Reinforced Concrete: Bending test (final recommendation). Materials and Structures, vol. 35, 579–582, (2002). [Google Scholar]
  20. M.P. Collins, E. C. Bentz, E. G. Sherwood, & J. K. Wight., Where is Shear Reinforcement Required? Review of Research Results and Design Procedures. ACI structural journal, vol. 106(4), 556–559, (2009). [Google Scholar]
  21. J. C. Walraven., Aggregate interlock: a theoretical and experimental analysis (Doctoral dissertation, TU Delft, Delft University of Technology), (1980). [Google Scholar]
  22. J. C. Walraven, & H. W. Reinhardt., Theory and experiments on the mechanical behaviour of cracks in plain and reinforced concrete subjected to shear loading. HERON, vol. 26 (1A), (1981). [Google Scholar]
  23. J. C. Walraven, Fundamental analysis of aggregate interlock. Journal of the Structural Division, ASCE, vol. 107(11), 2245–2270, (1981). [Google Scholar]
  24. K. V. Subramaniam, J. Popovics, and S. P. Shah., Testing Concrete in torsion: Instability analysis and Experiments, Journal of Engineering Mechanics, American Society of Civil Engineers (ASCE), vol. 124 (11), pp. 1258–1268, (1998). [CrossRef] [Google Scholar]
  25. IS 1786, High strength deformed steel bars and wires for concrete reinforcement, Bureau of Indian Standards. New Delhi, (2008). [Google Scholar]
  26. ASTM, C. 1609/C 1609M-06. Standard Test Method for Flexural Performance of Fiber–Reinforced Concrete (Using Beam with Third-Point Loading), ASTM International, USA, (2006). [Google Scholar]
  27. M. A. Sutton, W. J. Wolters, W. H. Peters, W. F. Ranson, & S. R. McNeill., Determination of displacements using an improved digital correlation method. Image and vision computing, vol. 1(3), 133–139. (1983). [CrossRef] [Google Scholar]
  28. M. A. Sutton, S. R. McNeill, J. Jang, & M. Babai., Effects of subpixel image restoration on digital correlation error estimates. Journal of Optical Engineering, vol. 27(10), 870–877, (1988). [CrossRef] [Google Scholar]
  29. C. Carloni, & K. V. Subramaniam., Direct determination of cohesive stress transfer during debonding of FRP from concrete. Composite Structures, vol. 93(1), 184–192, (2010). [CrossRef] [Google Scholar]
  30. K. C. Reddy, and K. V. Subramaniam, “Crack Propagation and Post cracking Behavior of Macrosynthetic Fiber Reinforced Concrete,” accepted for publication in Magazine of Concrete Research, (2017). [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.