Open Access
MATEC Web Conf.
Volume 119, 2017
The Fifth International Multi-Conference on Engineering and Technology Innovation 2016 (IMETI 2016)
Article Number 01009
Number of page(s) 12
Published online 04 August 2017
  1. P.K. Mehta and P.J. Monteiro, Concrete: microstructure, properties, and materials, fourth edition (McGraw-Hill Education, New York, 2014) [Google Scholar]
  2. S. Mindess, J.F. Young, and D. Darwin, Concrete, second edition (Pearson, London, 2002) [Google Scholar]
  3. A.M. Neville, Properties of concrete, fifth edition (Prentice Hall, San Francisco, USA, 2012) [Google Scholar]
  4. A. M. Hossack and M.D.A. Thomas, Cem. Concr. Res., 73, 136 (2015) [CrossRef] [Google Scholar]
  5. M.L. Nehdi, A.R. Suleiman, and A.M. Soliman, Cem. Concr. Res., 64, 42 (2014) [CrossRef] [Google Scholar]
  6. C. Yu, W. Sun, and K. Scrivener, Cem. Concr. Res., 43, 105 (2013) [CrossRef] [Google Scholar]
  7. Z. Makhloufi, S. Aggoun, B. Benabed, E. H. Kadri, and M. Bederina, Cem. Concr. Compos., 65, 186 (2016) [CrossRef] [Google Scholar]
  8. ACI Committee 318, Building code requirements for structural concrete (ACI 318 - 11 ) and commentary (ACI, Farmington Hills, MI, 2011) [Google Scholar]
  9. F. Mittermayr, M. Rezvani, A. Baldermann, S. Hainer, P. Breitenbücher, J. Juhart, C.A. Graubner, and T. Proske, Cem. Concr. Compos., 55, 364 (2015) [CrossRef] [Google Scholar]
  10. A. Skaropoulou, K. Sotiriadis, G. Kakali, and S. Tsivilis, Cem. Concr. Compos., 37, 267 (2013) [CrossRef] [Google Scholar]
  11. L. Jiang and D. Niu, Concr. Build. Mater., 117, 88 (2016) [CrossRef] [Google Scholar]
  12. S. Mirvalad and M. Nokken, Constr. Build. Mater., 84, 19 (2015) [CrossRef] [Google Scholar]
  13. N. Ghafoori, M. Najimi, H. Diawara, and M.S. Islam, Constr. Build. Mater., 78, 85 (2015) [CrossRef] [Google Scholar]
  14. I. Sirisawat, W. Saengsoy, L. Baingam, P. Krammart, and S. Tangtermsirikul, Constr. Build. Mater., 64, 39 (2014) [Google Scholar]
  15. A. Merida and F. Kharchi, Procedia Eng., 114, 832 (2015) [CrossRef] [Google Scholar]
  16. United Nations Framework Convention on Climate Change, Paris Climate Change Conference, Nov. (2015) [Google Scholar]
  17. A.P. Gurgun, R. Komurlu, and D. Arditi, Procedia Eng., 118, 1145 (2015) [CrossRef] [Google Scholar]
  18. A.M. Rashad, Int. J. Sustain. Built Environ., 4, 278 (2015) [Google Scholar]
  19. H. Dekkiche and A. Taileb, Procedia Eng., 145, 844 (2016) [CrossRef] [Google Scholar]
  20. C.L. Champagne and C.B. Aktas, Procedia Eng., 145, 380 (2016) [CrossRef] [Google Scholar]
  21. F. Asdrubali, G. Baldinelli, F. Bianchi, and S. Sambuco, Build. Environ., 86, 98 (2015) [CrossRef] [Google Scholar]
  22. Architecture and Building Research Institute, Ministry of the Interior, Green building evaluation manual-basic version (Architecture and Building Research Institute, Taipei, Taiwan, 2015) [Google Scholar]
  23. M.L. Marceau, M.A. Nisbet, and M.G. VanGeem, Life cycle inventory of Portland cement A R&D Serial No. 2095b (Portland Cement Association, Skokie, IL, 2005) [Google Scholar]
  24. M.A. Nisbet, M.L. Marceau, and M.G. VanGeem, Environmental life cycle inventory of Portland cement concrete, PCA R&D Serial No. 2137a (Portland Cement Association, Skokie, IL, 2002) [Google Scholar]
  25. M.L. Marceau, M.A. Nisbet, and M.G. VanGeem, Life cycle inventory of Portland cement concrete, PCA R&D Serial No. 3007 (Portland Cement Association, Skokie, IL, 2007) [Google Scholar]
  26. L. Acquaye, A. Chini, and M. Danso-Amoako, Green options for high temperature cured concrete through the use of fly ash and blast furnace slag (33rd Conference on Our World in Concrete & Structures, Singapore, August 25-27, 2008) [Google Scholar]
  27. K. Scrivener, Chem. World. March, 62 (2008) [Google Scholar]
  28. M.E. Haque, Int. J. Waste Resour., 3, 22 (2013) [CrossRef] [Google Scholar]
  29. Y. Wei, Q. Wang, G. Ying, Z. Luo, and Y. Ninomiya, Characteristics and utilization of fly ash from coal-fired power plant in China (2015 World of Coal Ash Conference, Nasvhille, TN, May 5-7, 2015) [Google Scholar]
  30. C. Meyer, Cem. Concr. Compos., 31, 601 (2009) [CrossRef] [Google Scholar]
  31. M. Nili and A.M. Salehi, Constr. Build. Mater., 24, 2108 (2010) [CrossRef] [Google Scholar]
  32. N. Cobîrzan, A.A. Balog, and E. Moşonyi, Procedia Technol., 19, 506 (2015) [CrossRef] [Google Scholar]
  33. K.W. Cheng, The study on the engineering properties of densify concrete with high volume slag content (Master Thesis, Department of Construction Engineering, National Taiwan University of Science and Technology, Taipei Taiwan, ROC, 2002) [Google Scholar]
  34. Y.Y. Chen, B.L.A. Tuan, and C.L. Hwang, Constr. Build. Mater., 47, 340 (2013) [Google Scholar]
  35. Y.Y. Chen, C.C. Wu, and K.W. Cheng, J. Archit., 91, 21 (2015) [Google Scholar]
  36. ACI Committee 211, Standard practice for selecting proportions for normal, heavyweight, and mass concrete (Reapproved 2009) (ACI, Farmington Hills, MI, 1991) [Google Scholar]
  37. E.A. Whitehurst, Soniscope tests concrete structures (Portland Cement Association, Chicago, 1951) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.