Open Access
MATEC Web Conf.
Volume 114, 2017
2017 International Conference on Mechanical, Material and Aerospace Engineering (2MAE 2017)
Article Number 04005
Number of page(s) 6
Section Chapter 4: Interdisciplinary
Published online 10 July 2017
  1. Eaton M, Keogh PS and Edge KA. The Modelling, prediction, and experimental evaluation of gear pump meshing pressures with particular reference to aero-engine fuel pumps. Proc IMechE Part I: J Systems and Control Engineering. 220,396-404,(2006). [Google Scholar]
  2. Shu W, Sakurai H. and Aditya K. The Optimal Design in External Gear Pumps and Motors. IEEE/ASME Transactions on Mechatronics 16, 945-952,(2011). [CrossRef] [Google Scholar]
  3. Lee G S, Jung SY and Bae JH. Design of rotor for internal gear pump using cycloid and circular-arc curves. Journal of Mechanical Design. 1-12, 134(1),(2012).. [Google Scholar]
  4. Del campo D, Castilla R, Raush GA, et al. Numerical analysis of external gear pumps including cavitation. ASME J Fluids Eng. 1-9, 134,(2012). [CrossRef] [Google Scholar]
  5. Neyrat S, Orand N and Jonquet D. Modeling and analysis of an automatic transmission internal gear oil pump with cavitation. SAE 2005 Noise and Vibration Conference and Exhibition,16-19, (2005). [Google Scholar]
  6. Andrea Vacca, Richard Klop and Monika Ivantysynova. A numerical approach for the evaluation of the effects of air release and vapour cavitation on effective flow rate of axial piston machines. International journal of fluid power,33-45, 11(1),(2010). [CrossRef] [Google Scholar]
  7. Abbot, Philip A., Walsh, James. And Halas, Richard. Cavitation noise investigation of a pump-turbine. Waterpower ‘91: A New View of Hydro Resources. 2031-2040,(1991). [Google Scholar]
  8. Heath R A. Theoretical analysis of cavitation conditions in gear pumps. Internal Report B60, 080, Lucas Aerospace Ltd, Birmingham, 1977. [Google Scholar]
  9. Yang Zhou, Shuanghui Hao and Minghui Hao. A two-dimensional numerical analysis of a circular-arc gear pump operating at high pressures and high speeds. Proc IMechE Part E: J Process Mechanical Engineering,1-12,(2015). (online). [Google Scholar]
  10. Yang Zhou, Shuanghui Hao and Minghui Hao. Design and performance analysis of a circular-arc gear pump operating at high pressure and high speed. Proc IMechE Part C: J Mechanical Engineering Science. 189-20. 230,(2016). [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.