Open Access
Issue
MATEC Web Conf.
Volume 109, 2017
2017 2nd International Conference on Materials Science and Nanotechnology (ICMSNT 2017) – 2017 2nd International Symposium on Material Science and Technology (ISMST 2017)
Article Number 01003
Number of page(s) 7
Section Chapter 1: Properties of Engineering Materials
DOI https://doi.org/10.1051/matecconf/201710901003
Published online 31 May 2017
  1. Md. S. Islam, A. Kovalcik, M. Hasan, V. K. Thakur. Natural Fiber Reinforced Polymer Composites. International Journal of Polymer Science. (2015). [Google Scholar]
  2. K.L. Pickering, M.G. Aruan Efendy, T.M. Le. A review of recent developments in natural fibre composites. Composites: Part A 83 (2016) 98–112. [CrossRef] [Google Scholar]
  3. R. Zah, R. Hischier, A.L. Leao, I. Braun. Curaua fibers in the automobile industry – A sustainability assessment. Journal of Cleaner Production. 15(2007) 1032–1040. [CrossRef] [Google Scholar]
  4. M. Nagai H. Miyairi. The Study on Charpy impact testing method of CFRP; Advanced Composite Materials: The Official Journal of the Japan Society of Composite Materials. 3 (1994) 177–190. [Google Scholar]
  5. S.N.A. Safri, M.T.H. Sultan, N. Yidris, F. Mustapha. Low Velocity and High Velocity Impact Test on Composite Materials – A review. The International Journal of Engineering and Science. 3 (2014) 50–60. [Google Scholar]
  6. C. Clemons, A. R. Sanadi. Instrumented Impact Testing of Kenaf Fiber Reinforced Polypropylene Composites: Effects of Temperature and Composition. Journal of Reinforced Plastics and Composites. (2007). [Google Scholar]
  7. F. S. da Luza, E. P. L. Juniora, L. H. L. Louroa, S. N. Monteiro. Ballistic Test of Multilayered Armor with Intermediate Epoxy Composite Reinforced with Jute Fabric. Materials Research. 18(2015). [Google Scholar]
  8. C.V. Srinivasa, K.N. Bharath. Impact and Hardness Properties of Areca Fiber-Epoxy Reinforced Composites. J. Mater. Environ. Sci. 2 (4) (2011) 351–356. [Google Scholar]
  9. A. Malhotra & F. J. Guild. Impact Damage to Composite Laminates: Effect of Impact Location. Appl Compos Mater 21 (2014) 165–177. [CrossRef] [Google Scholar]
  10. S. D. Rossoa, L. Iannuccia, P. T. Curtis. On the ballistic impact response of microbraid reinforced polymer composites. Composite Structures 137 (2016) 70–84. [CrossRef] [Google Scholar]
  11. I. Angelov, S. Wiedmer, M. Evstatiev, K. Friedrich, M. G. Pultrusion of a flax/ polypropylene yarn. Composites Part A, 38(5) (2007)1431–8. [CrossRef] [Google Scholar]
  12. K. Oksman. Mechanical properties of natural fibre mat reinforced thermoplastic. Appl Compos Mater, 7(5–6) (2000) 403–14. [CrossRef] [Google Scholar]
  13. Z. Li, X. Zhou, and C. Pei. Effect of Sisal Fiber Surface Treatment on Properties of Sisal Fiber Reinforced Polylactide Composites. International Journal of Polymer Science. 2011(2011). [Google Scholar]
  14. M. H. B. Snijder, H. L. Bos. Reinforcement of polypropylene by annual plant fibers: optimisation of the coupling agent efficiency. Compos Interfaces 7 (2) (2000) 69–79. [CrossRef] [Google Scholar]
  15. A. K. Bledzki, A. A. Mamun, M. Lucka, V. S. Gutowsk. The effects of acetylation on properties of flax fibre and its polypropylene composites. Express Polym Lett 2(6) (2006) 413–22. [CrossRef] [Google Scholar]
  16. A. Pavlovic, C. Fragassa, C. Santulli. Experimental Analysis of Mechanical Properties of Composites Reinforced by Flax and Basalt Natural Fibers. 5th Conference on Natural Fibre Composites, Rome 15-16 October 2015. [Google Scholar]
  17. M. S. Islam, K. L. Pickering, N. J. Foreman. Influence of alkali fiber treatment and fiber processing on the mechanical properties of hemp/epoxy composites. J Appl Polym Sci 119(6) (2011) 3696–707. [CrossRef] [Google Scholar]
  18. I. S. Islam, K. L. Pickering, N. J. Foreman. Influence of alkali treatment on the interfacial and physico-mechanical properties of industrial hemp fibre reinforced polylactic acid composites. Composites Part A, 41(5) (2010) 596–603. [CrossRef] [Google Scholar]
  19. B. Baghaei, M. Skrifvars, M. Salehi, T. Bashir, M. Rissanen, P. Nousiainen. Novel aligned hemp fibre reinforcement for structural biocomposites: porosity, water absorption, mechanical performances and viscoelastic behaviour. Composites Part A, 61 (2014) 1–12. [CrossRef] [Google Scholar]
  20. I. Van de Weyenberg, J. Ivens, A. De Coster, B. Kino, E. Baetens, I. Verpoest. Influence of processing and chemical treatment of flax fibres on their composites. Compos Sci Technol 63(9) (2003) 1241–6. [CrossRef] [Google Scholar]
  21. M. Sain, P. Suhara, S. Law, A. Bouilloux. Interface modification and mechanical properties of natural fiber-polyolefin composite products. J Reinf Plast Compos 24(2) (2005) 121–30. [CrossRef] [Google Scholar]
  22. M. K. Guptaa, R. K. Srivastava. Properties of sisal fibre reinforced epoxy composite. Indian Journal of Fibre & Textile Research. 41(2016), 235–241. [Google Scholar]
  23. J. B. Zhong, J. Lv, C. Wei. Mechanical properties of sisal fibre reinforced ureaformaldehyde resin composites. eXPRESS Polymer Letters. 1(10) (2007) 681–687. [CrossRef] [Google Scholar]
  24. G. Keledi, A. Sudár, Ch. Burgstaller, K. Renner, J. Móczó, B. Pukánszky. Tensile and impact properties of three-component PP/wood/elastomer composites. eXPRESS Polymer Letters 6(3) (2012) 224–236. [CrossRef] [Google Scholar]
  25. B. M. de Araújo, E. P. Lima, L. H. L. Louro, S. N. Monteiro. Ballistic Performance of Sisal Fibre Reinforced Epoxy Composite in Multilayered Armor. 21º CBECIMAT - Congresso Brasileiro de Engenharia e Ciência dos Materiais 09 a 13 de Novembro de 2014, Cuiabá, MT, Brasil. [Google Scholar]
  26. A. da S. FerreiraI, F. P. D. LopesI, S. N. MonteiroI, K. G. Satyanarayana. Charpy impact resistance of alkali treated curaua reinforced polyester composites. Revista Matéria, 15(2) (2010), 131–137. [Google Scholar]
  27. H. J. Li, M. M. Sain. High stiffness natural fiber-reinforced hybrid polypropylene composites. Polym Plast Technol Eng., 42(5) (2003):853–62. [CrossRef] [Google Scholar]
  28. A. Thumm, A. R. Dickson. The influence of fibre length and damage on the mechanical performance of polypropylene/wood pulp composites. Composites: Part A, 46 (2013) 45–52. [CrossRef] [Google Scholar]
  29. A. R. Dickson, D. Even, J. M. Warnes, A. Fernyhough. The effect of reprocessing on the mechanical properties of polypropylene reinforced with wood pulp, flax or glass fibre. Composites: Part A, 61 (2014) 258–267. [CrossRef] [Google Scholar]
  30. E. Elbadry, H. Hamada. Impact Properties of Natural Jute Fabric/Jute Mat Fiber Reinforced Polymer Matrix Hybrid Composites. Journal of Mechanics Engineering and Automatio, 2 (2012) 381–388. [Google Scholar]
  31. A. Gopinatha, M. S. Kumar, A. Elayaperumal. Experimental Investigations on Mechanical Properties of Jute Fiber Reinforced Composites with Polyester and Epoxy Resin Matrices. 12th Global congress on manufacturing and management, GCMM 2014. [Google Scholar]
  32. R. Naveenkumar, V. Sharun, B. Dhanasakkaravarthi, P. T. I. Rajakumar. Comparative study on jute and Kenaf fiber composite material. Int. Journal of Applied Sciences and Engineering Research, 4(2), 2015. [EDP Sciences] [Google Scholar]
  33. Hufenbach, W., et al. Charpy impact tests on composite structures – An experimental and numerical investigation. Composites Science and Technology, 68 (2008), 2391–2400. [CrossRef] [Google Scholar]
  34. Ujihashi, Sadayuki. An intelligent method to determine the mechanical properties of composites under impact loading. Composite Structures, (1993) 149–163. [CrossRef] [Google Scholar]
  35. Meola, Carosena, Carlomagno, M. Giovanni. Impact damage in GFRP: New insights with infrared thermography. Composites: Part A (2010), 1839–1847. [CrossRef] [Google Scholar]
  36. H. Ghasemnejad, V. R. Soroush, P. J. Mason. To improve impact damage response of single and multi-delaminated FRP composites using natural Flax yarn. Materials and Design, (2012) 865–873. [CrossRef] [Google Scholar]
  37. H. Ghasemnejad, A. S. M. Furquan, P. J. Mason. Charpy impact damage behaviour of single and multi-delaminated hybrid composite beam structures. Materials and Design, (2010) 3653–3660 [CrossRef] [Google Scholar]
  38. C. Scarponi, C. S. Pizzinelli, S. Sanchez-Saez, and E. Barbero. Impact load behaviour of Resin Transfer Moulding (RTM) hemp fibre composite laminates. Journal of Biobased Materials and Bioenergy, 3(3) (2009), 298–310. [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.