Open Access
| Issue |
MATEC Web Conf.
Volume 104, 2017
2017 2nd International Conference on Mechanical, Manufacturing, Modeling and Mechatronics (IC4M 2017) – 2017 2nd International Conference on Design, Engineering and Science (ICDES 2017)
|
|
|---|---|---|
| Article Number | 02017 | |
| Number of page(s) | 7 | |
| Section | Chapter 2: Engineering Simulation, Modeling and Mechatronics | |
| DOI | https://doi.org/10.1051/matecconf/201710402017 | |
| Published online | 14 April 2017 | |
- R. M. Jones, Mechanics of composite materials. 2nd edn. Taylor & Francis, Inc.,Philadelphia (1999). [Google Scholar]
- A. K. Kaw, Mechanics of composite materials. 2nd edn. Taylor & Francis Group (2006). [Google Scholar]
- J.Y. Sheikh-Ahmad, Machining of polymer composites. Springer science. doi:10.1016/j.nuclphysa.2015.02.011(2009). [CrossRef] [Google Scholar]
- J. Liu, D. Zhang, L. Qin, and L. Yan, Feasibility study of the rotary ultrasonic elliptical machining of carbon fiber reinforced plastics (CFRP). Int J Mach Tool Manuf., 53, 141–150 (2012). [Google Scholar]
- D. Geng, D. Zhang, Y. Xu, F. He, D. Liu, and Z. Duan, Rotary ultrasonic elliptical machining for side milling of CFRP: Tool performance and surface integrity. Ultrasonics, 59, 128–137(2015). [CrossRef] [Google Scholar]
- Z. J. Pei, P. M. Ferreira, and M. Haselkorn, Rotary ultrasonic drilling and milling of ceramics. The design for manufacturability and manufacture of ceramic components symposium, Am cera Soc., 96 th Annual meeting (1994). [Google Scholar]
- Z. J. Pei, and P. M Ferreira, An experimental investigation of rotary ultrasonic face milling. Int J Mach Tool Manuf., 39, 1327–1344(1999). [CrossRef] [Google Scholar]
- D. J. Feng, F. L. Zhao, Z. G. Xu, and D. M. Guo, Mathematic model of material removal rate for ultrasonic milling. China Mech Eng., 17(13), 1399–1403(2006). [Google Scholar]
- C. Zhang, J. Zhang, and P. Feng, Mathematical model for cutting force in rotary ultrasonic face milling of brittle materials. Int J Adv Manuf Technol., 69,161–170 (2013). [CrossRef] [Google Scholar]
- C. Zhang, S. Yuan, M. Amin, and F. Fan, Development of cutting force model based on brittle fracture for C/SiC using rotary ultrasonic facing milling. Int J Adv Manuf Technol., doi: 10.1007/s00170-015-7894-4(2015). [Google Scholar]
- D. B. Marshall, B. R. Lawn, and A. G. Evans, Elastic/plastic indentation damage in ceramics: the lateral crack system. J Am Cera Soc., 65 (11), 561–566 (1982). [CrossRef] [Google Scholar]
- B. R. Lawn, A. G. Evans, and D. B. Marshall, Elastic/plastic indentation damage in ceramics: the median/radial crack system. J Am Cera Soc., 63 (9–10), 574–581(1980). [CrossRef] [Google Scholar]
- J. A. Collins, Failure of materials in mechanical design. Wiley, New York (1981). [Google Scholar]
- www.inlandcraft.com/uguides/lapidary_grit_chart.pdf. Accessed 15 September 2016. [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.