Open Access
Issue
MATEC Web Conf.
Volume 103, 2017
International Symposium on Civil and Environmental Engineering 2016 (ISCEE 2016)
Article Number 02005
Number of page(s) 10
Section Structure, Solid Mechanics and Computational Engineering
DOI https://doi.org/10.1051/matecconf/201710302005
Published online 05 April 2017
  1. A.T.Waleed, M.S.Jaafar, M.Razali, A.Kadir, A.A.A.Abang, D.N.Trikha and M.S.Najm, Development of an innovative interlocking load bearing hollow block system in Malaysia, Construction and Building Materials, 18(6), 445–454 (2004) [CrossRef] [Google Scholar]
  2. K.A.MKamar, M.Alshawi and Z.Hamid, Barriers to industrial building system (IBS): The case of Malaysia, Proc. of the 9th Int. Postgraduate Research Conference, Salford, United Kingdom, (2009) [Google Scholar]
  3. Construction Industry Development Board (CIDB), Construction industry master plan Malaysia 2006-2015, Malaysia Construction Industry Development Board, Salford, United Kingdom, (2007) [Google Scholar]
  4. ACI 318-89, Building code requirements for reinforced concrete (ACI 318-89) (Revised 1992) and Commentary-ACI 318-89 (Revised 1992), Michigan, American Concrete Institute, (1992) [Google Scholar]
  5. N.Narayanan and K.Ramamurthy, Structure and properties of aerated concrete: A review, Cement and Concrete Composites, 22, 321–329 (2000) [CrossRef] [Google Scholar]
  6. D.Aldrigde, Introduction to foamed concrete: What, why, how? Used of foamed concrete in construction, Thomas Telford, Scotland, United Kingdom, (2005) [Google Scholar]
  7. M.L.Zakaria, Bahan dan binaan, Dewan Bahasa dan Pustaka, Kuala Lumpur, Malaysia, (1978) [Google Scholar]
  8. J.M.Scanlon, Lightweight concrete, Concrete construction handbook, 4th edition, McGraw-Hill Inc, New York, United States, (1998) [Google Scholar]
  9. K.Ramamurthy, E.K.Kunhanandan Nambiar and G.A.Indu Siva Ranjani, Classification of studies on properties of foamed concrete. Cement and Concrete Composites, 31, 388–396 (2006) [CrossRef] [Google Scholar]
  10. British Cement Association, Foamed concrete composition and properties, British Cement Association, Camberley, United Kingdom, (1994) [Google Scholar]
  11. K.Aghaee and M.A.Yazdi, Waste steel wires modified structural lightweight concrete, Materials Research, 17(4), 958–966 (2014) [CrossRef] [Google Scholar]
  12. M.T.Nahhas, Flexural behavior and ductility of reinforced lightweight concrete beams with polypropylene fiber, J. of Construction Engineering and Management, 1(1), 4–10 (2013) [Google Scholar]
  13. S.Ahmed, A.I.Bukhari, I.J.Siddiqui and S.I.Qureshi, A study on properties of polypropylene fiber reinforced concrete, 31st Our World in Concrete and Strcuture, Singapore, (2006) [Google Scholar]
  14. A.Sadrmomtazi and A.Fasihi, Influence of polypropylene fibres on the performance of nano-sio2-incorporated mortar, Iranian J. of Science and Technology, Transaction Engineering, 34, 385–395 (2010) [Google Scholar]
  15. H.Awang, M.H.Ahmad and M.Z.Al-Mulali, Influence of kenaf and polypropylene fibres on mechanical and durability properties of fibre reinforced lightweight foamed concrete, Engineering Science and Technology, 10(4), 496–508 (2015) [Google Scholar]
  16. A.Elsaid, M.Dawood, R.Seracino and C.Bobko, Mechanical properties of kenaf fibre reinforced concrete, Construction and Building Materials, 25(4), 1991–2001 (2011) [CrossRef] [Google Scholar]
  17. O.AAhmad and M.Awwad, The effects of polypropylene fibers additions on compressive and tensile strengths of concrete, Int. J. of Civil and Environmental Engineering, 37(1), 1365–1372 (2015) [Google Scholar]
  18. Parveen and A. Sharma, Structural behaviour of fibrous concrete using polypropylene fibres, Int. J. of Modern Engineering Research, 3(3), 1279–1282 (2013) [Google Scholar]
  19. K.Ramujee, Strength properties of polypropylene fiber reinforced concrete, Int. J. of Inovative Research in Science, Engineering and Technology, 2(8), 3409–3413 (2013) [Google Scholar]
  20. C.Han, Y.Hwang, S.Ynag and N.Gowripalan. Performance of spalling resistance of high performance concrete with polypropylene fiber contents and lateral confinement, Cement Concrete Research, 35, 1747–1753 (2005) [CrossRef] [Google Scholar]
  21. M.Zeiml, D.Leithner, R.Lackner and A.H.Mang, How do polypropylene fibers improve the spalling behavior of in-situ concrete?, Cement and Concrete Research, 36, 929–942 (2006) [CrossRef] [Google Scholar]
  22. N.Banthia and R.Gupta, Influence of polypropylene fiber geometry on plastic shrinkage cracking in concrete, Cement Concrete Research, 36, 1263–1267 (2006) [CrossRef] [Google Scholar]
  23. P.Nagarkar, S.Tambe and D.G.Pazare, Study of fibre reinforced concrete, Proc. of Int. Symposium of fibre reinforced concrete, Madras, India, (1987) [Google Scholar]
  24. N.Mohamad, A.I.Khalil, A.A.A.Samad and W.I.Goh, Structural behaviour of precast lightweight foam concrete sandwich panel with double shear truss connectors under flexural load, ISRN Civil Engineering, 2014, 1–7 (2014) [CrossRef] [Google Scholar]
  25. N.K.Mustaffa, M.S.Hamidah and H.G.Kwak, Finite element analysis on prediction structural behaviour of reinforced foamed concrete slab, Proc. of the 10th Int. Conf. on Concrete Engineering and Technology, Shah Alam, Malaysia, (2009) [Google Scholar]
  26. Y.H.Mugahed Amran, S.M.R.Rashid, F.Hejazi, N.A.Safiee and A.A.Abang Ali, Structural behavior of laterally loaded precast foamed concrete sandwich panel, Int. J. of Civil, Environmental, Structural Construction and Architectural Engineering, 10(3), 265–272 (2016) [Google Scholar]
  27. A.Benayoune, A.A.Abang Ali, A.A.Abdul Samad and D.N.Trikha, Flexural analysis of composite one-and two-way sandwich slabs with truss-shaped connectors, J. The Institution of Engineers Malaysia, 68(1), 53–60, (2007) [Google Scholar]
  28. M.Joshani, S.S.R.Koloor and R.Abdullah, Damage mechanic model for fracture process of steel concrete composite slabs, Applied Mechanics and Materials, 165, 339–345 (2012) [CrossRef] [Google Scholar]
  29. S.N.Mokhatar and R.Abdullah, Computational analysis of reinforced concrete slabs subjected to impact loads, Int. J. of Integrated Engineering, 4(2), 70–76 (2012) [Google Scholar]
  30. C.M.Newberry, J.M.Hoemann, B.T.Bewick and J.S.Davidson, Simulation of prestressed concrete sandwich panels subjected to blast loads, 2010 Structure Congress, Orlamdo, Florida, (2010) [Google Scholar]
  31. C.Soranakom, B.Mobasher and X.Destrée, Numerical simulation of FRC round panel tests and full-scale elevated slabs, American Concrete Institute, 248, 31–40 (2007) [Google Scholar]
  32. R.Abdullah, V.P.Paton-Cole, W.Samuel Easterling, Quasi-static analysis of composite slab, Malaysian J. of Civil Engineering, 19(2), 1–13 (2007) [CrossRef] [Google Scholar]
  33. ASTM Standard E72-80, Standard test methods of conducting strength tests of panels for building construction, ASTM International, West Conshohocken, Pennsylvania, (2005) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.