Open Access
Issue
MATEC Web Conf.
Volume 103, 2017
International Symposium on Civil and Environmental Engineering 2016 (ISCEE 2016)
Article Number 01019
Number of page(s) 8
Section Sustainable and Advanced Construction Materials
DOI https://doi.org/10.1051/matecconf/201710301019
Published online 05 April 2017
  1. J.X Sun, Fractional extraction and structural characterization of sugarcane bagasse hemicelluloses, Carbohydrate Polymers, 56, 195–204, (2004) [CrossRef] [Google Scholar]
  2. B.C. Suddell and W.J. Evans, The increasing use and application of natural fibre composite materials within the automotive industry, Proc. of the Seventh Int. Conf. on Woodfiber-Plastic Composites,Forest Products Socety, Madison, WI, USA, (2003) [Google Scholar]
  3. K.C.P. Faria, R.F. Gurgel and J.N.F. Holanda, Recycling of sugarcane bagasse ash waste in the production of clay bricks, J. of Environmental Management, 101, 7–12, (2003) [CrossRef] [Google Scholar]
  4. J. B. Khedari, New lightweight construction materials with low thermal conductivity. Cement and Concrete Composites, 23, 65–70 (2002). [CrossRef] [Google Scholar]
  5. P.A. Turgut and H.M. Algin, Limestone dust and wood sawdust as brick material, Building and Environment, 42(9), 3399–3403, (2007) [CrossRef] [Google Scholar]
  6. J.Y. Tock, C.L. Lai, K.T. Lee, K.T Tan and S. Bhatia, Banana biomass as potential renewable energy resource: A Malaysian case study, Renewable and sustainable energy reviews, 14(2), 798–805, (2010) [CrossRef] [Google Scholar]
  7. H.P.S. Abdul Khalil, M. Siti Alwani and A.K. Mohd Omar, Chemical composition, anatomy, lignin distribution and cell wall structure of Malaysian plant waste fibers, Bio Resources, 17, 220–232, (2006) [Google Scholar]
  8. A. Pappu, M. Saxena, S. R. Asolekar. Solid wastes generation in India and their recycling potential in building materials, Build Environ, 42, 2311–2320 (2007) [CrossRef] [Google Scholar]
  9. M.V. Madurwar, R.V. Ralegaonkar and S.A. Mandavgane, Application of agro-waste for sustainable construction materials: A review, Construction and Building Materials, 38, 872–878, (2013) [CrossRef] [Google Scholar]
  10. T. Rauber, Natural fibre specialist, (2007), Retrieved on April 20, 2016 from Bcomp: http://www.bcomp.ch/10-0-natural-fibres.html [Google Scholar]
  11. M. M. Uddin, Effect of banana fibers on the compressive and flexural, Buildings, 5, 282–296, (2015) [Google Scholar]
  12. ASTM Designation C109/C109M-07, Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens), ASTM International, (2008) [Google Scholar]
  13. W.Y. Li, A.X. Jin, C.F. Liu, R.C. Sun, A.P. Zhang and J.F. Kennedy, Homogeneous modification of cellulose with succine anhydride in ionic liquid using 4-dimethylaminopyridine as a catalyst, Carbohydrate Polymers, 78(3), 389–395, (2009) [CrossRef] [Google Scholar]
  14. A.K. Pietak, Atomic force microscopy characterization of the surface wettability of natural fibers, Applied surface sciences, 253(7), 3627–3635, (2007) [CrossRef] [Google Scholar]
  15. H.J. Savastano, P.G. Warden and R.S.P. Coutts, Performance of low-cost vegetable fibrecement composites under weathering, Proceedings of CIIB World building congress, Wellington, New-Zealand, (2001) [Google Scholar]
  16. H.J. Savastano, P.G. Warden and R.S.P Coutts, Mechanically pulp sisal as reinforcement in cementitious matrices, Cem Concr Compos, 25, 585–92, (2003) [CrossRef] [Google Scholar]
  17. E. Aminudin, M.F.M. Din, M.W. Hussin, A.H. Abdullah, K. Iwao and Y. Ichikawa, Properties of agro-Industrial aerated concrete as potential thermal insulation for building, MATEC Web of Conf., 1–9, (2016) [Google Scholar]
  18. S.M.S. Mohsin, M.F. Manaf, N.N. Sarbini and K. Muthusamy, Behaviour of reinforced concrete beams with kenaf and steel hybrid fibre, ARPN J. of Engineering and Applied Sciences, 11, 5385–5390 (2016) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.