Open Access
MATEC Web Conf.
Volume 66, 2016
The 4th International Building Control Conference 2016 (IBCC 2016)
Article Number 00115
Number of page(s) 8
Published online 13 July 2016
  1. Y. Wang,Z. Fu-Yun, J. Kuckelkorn, D. Liu, J. Liu, Z. Jun-Liang. Classroom energy efficiency and air environment with displacement natural ventilation in a passive public school building. Energ. Buildings. 70:258-70 (2014) [CrossRef]
  2. L.C. Haw, O. Saadatian, M.Y. Sulaiman, S. Mat, K. Sopian. Empirical study of a wind-induced natural ventilation tower under hot and humid climatic conditions. Energ. Buildings. 52:28-38 (2012) [CrossRef]
  3. S.C. Wilson, R.N. Palmatier, L.A. Andriychuk, J.M. Martin, C.A. Jumper, H.W. Holder, et al. Mold contamination and air handling units. J. Occup. Env. Hyg. 4:483-91 (2007) [CrossRef]
  4. H. Qian, Y. Li, P.V. Nielsen, X. Huang. Spatial distribution of infection risk of SARS transmission in a hospital ward. Build. Environ. 44:1651–8 (2009) [CrossRef]
  5. Y. Li, X. Huang, I. Yu, T. Wong, H. Qian. Role of air distribution in SARS transmission during the largest nosocomial outbreak in Hong Kong. Indoor Air. 15:83-95 (2005) [CrossRef]
  6. J. Walker, P. Hoffman, A. Bennett, M. Vos, M. Thomas, N. Tomlinson. Hospital and community acquired infection and the built environment–design and testing of infection control rooms. J. Hosp. Infect. 65:43-9 (2007) [CrossRef]
  7. R. Tomasi, M. Krajčík, A. Simone, B.W. Olesen. Experimental evaluation of air distribution in mechanically ventilated residential rooms: Thermal comfort and ventilation effectiveness. Energ. Buildings. 60:28-37 (2013) [CrossRef]
  8. X. Lü. Modelling of heat and moisture transfer in buildings: II. Applications to indoor thermal and moisture control. Energ. Buildings. 34:1045–54 (2002) [CrossRef]
  9. H.J. Moon, S.H. Ryu, J.T. Kim. The effect of moisture transportation on energy efficiency and IAQ in residential buildings. Energ. Buildings. 75:439-46 (2014) [CrossRef]
  10. Y. Wang, Y. Liu, D. Wang, J. Liu. Effect of the night ventilation rate on the indoor environment and air-conditioning load while considering wall inner surface moisture transfer. Energ. Buildings. 80:366-74 (2014) [CrossRef]
  11. G. Cao, P.V. Nielsen, R.L. Jensen, P. Heiselberg, L. Liu, J. Heikkinen. Protected zone ventilation and reduced personal exposure to airborne cross-infection. Indoor Air. (2014)
  12. N. Mao, D. Pan, M. Chan, S. Deng. Performance evaluation of an air conditioning system with different heights of supply outlet applied to a sleeping environment. Energ. Buildings. 77:281-91 (2014) [CrossRef]
  13. J. von Grabe, P. Svoboda, A. Bäumler. Window ventilation efficiency in the case of buoyancy ventilation. Energ. Buildings. 72:203-11 (2014) [CrossRef]
  14. G. Cao, K. Sirén, S. Kilpeläinen. Modelling and experimental study of performance of the protected occupied zone ventilation. Energ. Buildings. 68:515-31 (2014) [CrossRef]
  15. M.K. Kim, H. Leibundgut, J.-H. Choi. Energy and exergy analyses of advanced decentralized ventilation system compared with centralized cooling and air ventilation systems in the hot and humid climate. Energ. Buildings. 79:212-22 (2014) [CrossRef]
  16. G. Cao, H. Awbi, R. Yao, Y. Fan, K. Sirén, R. Kosonen, et al. A review of the performance of different ventilation and airflow distribution systems in buildings. Build. Environ. 73:171-86 (2014) [CrossRef]
  17. E. Mundt, H.M. Mathisen, P.V. Nielsen, A. Moser (Eds.). Ventilation effectiveness(Vol. 2). Finland: REHVA (2004)
  18. C. Brouns, B. Waters, A. Infiltration. A guide to contaminant removal effectiveness: Air Infiltration and Ventilation Centre; (1991)
  19. M.W. Liddament, A. Infiltration. A Review and Bibliography of Ventilation Effectiveness: Definitions, Measurement, Design and Calculation: Air Infiltration and Ventilation Centre; (1987)
  20. A. Novoselac, J. Srebric. Comparison of air exchange efficiency and contaminant removal effectiveness as IAQ indices. ASHRAE Trans. 109:339-49 (2003)
  21. G. Gan. Evaluation of room air distribution systems using computational fluid dynamics. Energ. Buildings. 23:83-93 (1995) [CrossRef]
  22. D.R. Irwin, C.J. Simonson, K.Y. Saw, R.W. Besant. Contaminant and heat removal effectiveness and air-to-air heat/energy recovery for a contaminated air space. ASHRAE Trans. 104:433-47 (1998)
  23. R.H. Mohammed. Numerical Investigation of Displacement Ventilation Effectiveness. Int. J. Mech. Aero. Ind. Mech. Eng. 8(2014)
  24. M.A. Aziz, I.A.M. Gad, E.S.F.A. Mohammed, R.H. Mohammed. Experimental and numerical study of influence of air ceiling diffusers on room air flow characteristics. Energ. Buildings. 55:738-46 (2012) [CrossRef]
  25. M. Ali, M.O. Oladokun, S.B. Osman, N. Samsuddin, H.A. Hamzah. CFD Investigation of Indoor Hygrothermal and Airflow Profile in Academic Research Storage Room: Effect of LMA on Thermohygric Balance and Mould Growth. Paper presented at the The International Conference on Computational Fluid Dynamics in Research and Industry (CFDRI 2015), Kuala Lumpur, Malaysia. (2015)
  26. ASHRAE. ANSI/ASHRAE standard 55-2013: Thermal environmental conditions for human occupancy. Edition ed.: American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc.; (2013)
  27. R. Sulaiman, H.L. Schellen, J.L. Hensen. Pilot study on Indoor Climate Investigation and Computer Simulation in Historical Museum Building: Amerongen Castle, the Netherlands. J. Des. Built. Environ. 7:75-94 (2010)
  28. M. La Gennusa, G. Rizzo, G. Scaccianoce, F. Nicoletti. Control of indoor environments in heritage buildings: experimental measurements in an old Italian museum and proposal of a methodology. J. Cult. Herit. 6:147-55 (2005) [CrossRef]
  29. H. Janssen, J.E. Christensen. Hygrothermal optimisation of museum storage spaces. Energ. Buildings. 56:169-78 (2013) [CrossRef]
  30. S. Jelena. Ventilation performance prediction. In: J. Hensen, LambertsR., (Eds.). Building performance simulation for design and operation: Taylor & Francis; (2011)
  31. M.O. Oladokun. Mould Growth Prediction in Tropical Climate Buildings by Hygrothermal Differentials[Dissertation]. Unpublished: International Islamic University Malaysia; (2015)
  32. W. Vincent, J. Weir. Statistics in Kinesiology. 4th ed: Human Kinetics; (2012)
  33. T. van Hooff, B. Blocken. On the effect of wind direction and urban surroundings on natural ventilation of a large semi-enclosed stadium. Comput. Fluids. 39:1146–55 (2010) [CrossRef]
  34. Standards Malaysia. MS 1525:2014 Energy Efficiency and use of Renewable Energy for Non-Residential Buildings - Code of Practice (Second Revision). Edition ed. Putrajaya Malaysia: Department of Standards Malaysia; (2014)
  35. ASHRAE. ANSI/ASHRAE/ASHE Standard 170-2013: Ventilation Standard For Health Care Facilities. Edition ed. Atlanta: American Society of Heating, Refrigerating and Air-Conditioning Engineers.; (2013)
  36. C. Sekhar. Thermal Comfort in Air‐conditioned Buildings in Hot and Humid Climates – why are we not getting it right? Indoor Air. (2015)
  37. ASHRAE. ANSI/ASHRAE standard 62.1-2013: ventilation for acceptable indoor air quality: American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc.; (2013)
  38. Z. Lin, T.T. Chow, C.F. Tsang, K.F. Fong, L.S. Chan. Stratum ventilation – A potential solution to elevated indoor temperatures. Build. Environ. 44:2256–69 (2009) [CrossRef]
  39. L. Tian, Z. Lin, Q. Wang. Experimental investigation of thermal and ventilation performances of stratum ventilation. Build. Environ. 46:1309–20 (2011) [CrossRef]
  40. G. He, X. Yang, J. Srebric. Removal of contaminants released from room surfaces by displacement and mixing ventilation: modeling and validation. Indoor Air. 15:367-80 (2005) [CrossRef]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.