Open Access
Issue
MATEC Web Conf.
Volume 66, 2016
The 4th International Building Control Conference 2016 (IBCC 2016)
Article Number 00099
Number of page(s) 10
DOI https://doi.org/10.1051/matecconf/20166600099
Published online 13 July 2016
  1. R. Swamy, Design for sustainable development of concrete construction, Proceedings of the Fourth International Structural Engineering and Construction Conference (ISEC 4), Taylor & Francis Ltd England, 2007, pp. 47–54.
  2. C. Meyer, The greening of the concrete industry, Cement and Concrete Composites, 31 (2009) 601–605. [CrossRef]
  3. R. Roskovic, D. Bjegovic, Role of mineral additions in reducing CO 2 emission, Cement and Concrete Research, 35 (2005) 974–978. [CrossRef]
  4. P.K. Mehta, P.J. Monteiro, Concrete: microstructure, properties, and materials, McGraw-Hill New York2006.
  5. A. Ramezanianpour, M. Mahdikhani, G. Ahmadibeni, The effect of rice husk ash on mechanical properties and durability of sustainable concretes, DOI (2009).
  6. L. Federico, S. Chidiac, Waste glass as a supplementary cementitious material in concrete–critical review of treatment methods, Cement and concrete composites, 31 (2009) 606–610. [CrossRef]
  7. S. Badur, R. Chaudhary, Utilization of hazardous wastes and by-products as a green concrete material through S/S process: A review, Rev. Adv. Mater. Sci, 17 (2008) 42–61.
  8. M. Harimi, D. Harimi, V.J. Kurian, B. Nurmin, Evaluation of the Thermal Performance of Metal Roofing under Tropical Climatic Conditions, Center of Mineral and Materials, Universiti Malaysia Sabah, Malaysia, 2005.
  9. K. Miura, T. Masuda, T. Funazukuri, K. Sugawara, Y. Shirai, J.-i. Hayashi, M.I.A. Karim, F.N. Ani, H. Susanto, Efficient use of oil palm wastes as renewable resource for energy and chemicals, Kyoto University, Japan, March, DOI (2001).
  10. Global Palm Oil Conference, Colombia, 2015.
  11. U. ESCAP, ESCAP report: biomass increasingly important in Indonesia and Thailand, E-news environment and sustainable development, 7 (2007) 5.
  12. P. Shafigh, M.Z. Jumaat, H. Mahmud, Mix design and mechanical properties of oil palm shell lightweight aggregate concrete: a review, International journal of the physical sciences, 5 (2010) 2127–2134.
  13. M. Mannan, C. Ganapathy, Mix design for oil palm shell concrete, Cement and concrete research, 31 (2001) 1323–1325. [CrossRef]
  14. F.O. Okafor, Palm kernel shell as a lightweight aggregate for concrete, Cement and Concrete Research, 18 (1988) 901–910. [CrossRef]
  15. D. Okpala, Palm kernel shell as a lightweight aggregate in concrete, Building and environment, 25 (1990) 291–296. [CrossRef]
  16. H. Basri, M. Mannan, M. Zain, Concrete using waste oil palm shells as aggregate, Cement and concrete Research, 29 (1999) 619–622. [CrossRef]
  17. D. Teo, M.A. Mannan, V. Kurian, C. Ganapathy, Lightweight concrete made from oil palm shell (OPS): structural bond and durability properties, Building and Environment, 42 (2007) 2614–2621. [CrossRef]
  18. K. Gunasekaran, P. Kumar, M. Lakshmipathy, Mechanical and bond properties of coconut shell concrete, Construction and building materials, 25 (2011) 92–98. [CrossRef]
  19. M. Mannan, C. Ganapathy, Concrete from an agricultural waste-oil palm shell (OPS), Building and Environment, 39 (2004) 441–448. [CrossRef]
  20. M.A. Mannan, C. Ganapathy, Engineering properties of concrete with oil palm shell as coarse aggregate, Construction and Building Materials, 16 (2002) 29–34. [CrossRef]
  21. A. Abdullah, Basic strength properties of lightweight concrete using agricultural wastes as aggregates, Proceedings of international conference on low-cost housing for developing countries, Roorkee, India, 1984.
  22. P. Shafigh, M.Z. Jumaat, H. Mahmud, Oil palm shell as a lightweight aggregate for production high strength lightweight concrete, Construction and Building Materials, 25 (2011) 1848–1853. [CrossRef]
  23. P. Shafigh, M.Z. Jumaat, H.B. Mahmud, U.J. Alengaram, A new method of producing high strength oil palm shell lightweight concrete, Materials & Design, 32 (2011) 4839–4843. [CrossRef]
  24. P. Shafigh, H. Mahmud, M.Z. Jumaat, Effect of steel fiber on the mechanical properties of oil palm shell lightweight concrete, Materials & Design, 32 (2011) 3926–3932. [CrossRef]
  25. P. Shafigh, H.B. Mahmud, M.Z. Jumaat, Oil palm shell lightweight concrete as a ductile material, Materials & Design, 36 (2012) 650–654. [CrossRef]
  26. P. Shafigh, H.B. Mahmud, M.Z. Jumaat, M. Zargar, Agricultural wastes as aggregate in concrete mixtures–A review, Construction and Building Materials, 53 (2014) 110–117. [CrossRef]
  27. D. Teo, M. Mannan, V. Kurian, Durability of lightweight OPS concrete under different curing conditions, Materials and structures, 43 (2010) 1–13. [CrossRef]
  28. U.J. Alengaram, H. Mahmud, M.Z. Jumaat, Comparison of mechanical and bond properties of oil palm kernel shell concrete with normal weight concrete, DOI.
  29. B. Standard, 8110:’Structural use of concrete’, British Standards Institution, DOI (1985).
  30. D.C. Teo, M.A. Mannan, J.V. Kurian, Flexural behaviour of reinforced lightweight concrete beams made with oil palm shell (OPS), Journal of Advanced Concrete Technology, 4 (2006) 459–468. [CrossRef]
  31. E. Ahmed, H.R. Sobuz, Flexural and time-dependent performance of palm shell aggregate concrete beam, KSCE Journal of Civil Engineering, 15 (2011) 859–865. [CrossRef]
  32. M.Z. Jumaat, U.J. Alengaram, H. Mahmud, Shear strength of oil palm shell foamed concrete beams, Materials & Design, 30 (2009) 2227–2236. [CrossRef]
  33. U.J. Alengaram, M.Z. Jumaat, H. Mahmud, M.M. Fayyadh, Shear behaviour of reinforced palm kernel shell concrete beams, Construction and Building Materials, 25 (2011) 2918–2927. [CrossRef]
  34. D. Teo, M. Mannan, V. Kurian, Structural concrete using oil palm shell (OPS) as lightweight aggregate, Turkish Journal of Engineering and Environmental Sciences, 30 (2006) 251–257.
  35. W. Tangchirapat, C. Jaturapitakkul, P. Chindaprasirt, Use of palm oil fuel ash as a supplementary cementitious material for producing high-strength concrete, Construction and Building Materials, 23 (2009) 2641–2646. [CrossRef]
  36. E. Aprianti, P. Shafigh, S. Bahri, J.N. Farahani, Supplementary cementitious materials origin from agricultural wastes–A review, Construction and Building Materials, 74 (2015) 176–187. [CrossRef]
  37. H. Noorvand, A.A.A. Ali, R. Demirboga, H. Noorvand, N. Farzadnia, Physical and chemical characteristics of unground palm oil fuel ash cement mortars with nanosilica, Construction and Building Materials, 48 (2013) 1104–1113. [CrossRef]
  38. A.A. Awal, I. Shehu, Evaluation of heat of hydration of concrete containing high volume palm oil fuel ash, Fuel, 105 (2013) 728–731. [CrossRef]
  39. P. Chindaprasirt, C. Jaturapitakkul, T. Sinsiri, Effect of fly ash fineness on microstructure of blended cement paste, Construction and Building Materials, 21 (2007) 1534–1541. [CrossRef]
  40. C. Jaturapitakkul, K. Kiattikomol, W. Tangchirapat, T. Saeting, Evaluation of the sulfate resistance of concrete containing palm oil fuel ash, Construction and Building Materials, 21 (2007) 1399–1405. [CrossRef]
  41. R. Madandoust, M.M. Ranjbar, H.A. Moghadam, S.Y. Mousavi, Mechanical properties and durability assessment of rice husk ash concrete, Biosystems engineering, 110 (2011) 144–152. [CrossRef]
  42. V. Sata, C. Jaturapitakkul, K. Kiattikomol, Utilization of palm oil fuel ash in high-strength concrete, Journal of Materials in Civil Engineering, 16 (2004) 623–628. [CrossRef]
  43. V. Sata, C. Jaturapitakkul, K. Kiattikomol, Influence of pozzolan from various by-product materials on mechanical properties of high-strength concrete, Construction and Building Materials, 21 (2007) 1589–1598. [CrossRef]
  44. W. Tangchirapat, C. Jaturapitakkul, Strength, drying shrinkage, and water permeability of concrete incorporating ground palm oil fuel ash, Cement and Concrete Composites, 32 (2010) 767–774. [CrossRef]
  45. C. Astm, 618 Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for use as a Mineral Admixture in Portland Cement Concrete, American Society for Testing of Materials, Philadelphia, USA, DOI.
  46. M. Aldahdooh, N.M. Bunnori, M.M. Johari, Development of green ultra-high performance fiber reinforced concrete containing ultrafine palm oil fuel ash, Construction and Building Materials, 48 (2013) 379–389. [CrossRef]
  47. S. Bamaga, M. Hussin, M.A. Ismail, Palm oil fuel ash: promising supplementary cementing materials, KSCE Journal of Civil Engineering, 17 (2013) 1708–1713. [CrossRef]
  48. M.A. El-Gelany Ismail, Study on the properties of palm oil fiber, DOI (2009).
  49. M. Subramani, Palm oil fiber as an additive in concrete, Universiti Teknologi Malaysia, DOI (2007).
  50. H. Hashim, The effect of palm oil fiber on concrete properties, Tesis Sarjana Muda. Universiti Teknologi Malaysia, 2008.
  51. Y. Mohammadi, S. Singh, S. Kaushik, Properties of steel fibrous concrete containing mixed fibres in fresh and hardened state, Construction and Building Materials, 22 (2008) 956–965. [CrossRef]
  52. K.-N. Law, W.R.W. Daud, A. Ghazali, Morphological and chemical nature of fiber strands of oil palm empty-fruit-bunch (OPEFB), BioResources, 2 (2007) 351–362.
  53. M. Ramli, E.T. Dawood, Effects of palm fiber on the mechanical properties of lightweight concrete crushed brick, Am J Eng Appl Sci, 3 (2010) 489–493. [CrossRef]
  54. A.K. Mohanty, M. Misra, L.T. Drzal, Natural fibers, biopolymers, and biocomposites, CRC Press 2005. [CrossRef]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.