Open Access
Issue
MATEC Web of Conferences
Volume 53, 2016
International Scientific Conference Week of Science in SPbPU – Civil Engineering (SPbWOSCE-2015)
Article Number 01058
Number of page(s) 9
Section Engineering and Technology
DOI https://doi.org/10.1051/matecconf/20165301058
Published online 15 April 2016
  1. C. X.Q., C. Y.Q., and C. J.G., “Mobiles Robots - Past Present and Future,” Mobile Robots - State of the Art in Land, Sea, Air, and Collaborative Missions, C. X.Q., Ed.: InTech, 2009 [Google Scholar]
  2. G. Resconi, A. Borboni, R. Faglia, and M. Tiboni, Lecture Notes in Computer Science, 2178 LNCS, 352–368, 2001 [CrossRef] [Google Scholar]
  3. M. Antonini, A. Borboni, R. Bussola, and R. Faglia, Proceedings of 8th Biennial ASME Conference on Engineering Systems Design and Analysis ESDA2006, 2006, 1–8, 2006 [Google Scholar]
  4. A. Borboni, R. Bussola, R. Faglia, P. L. Magnani, and A. Menegolo, Journal of Mechanical Design, Transactions of the ASME, 130, 0823011–0823016, 2008 [CrossRef] [Google Scholar]
  5. F. Aggogeri, A. Borboni, and R. Faglia, Applied Mechanics and Materials, 373-375, 130–133, 2013 [CrossRef] [Google Scholar]
  6. R. Fernández, C. Salinas, H. Montes, P. G. De Santos, and M. Armada, Adaptive Mobile Robotics - Proceedings of the 15th International Conference on Climbing and Walking Robots and the Support Technologies for Mobile Machines, CLAWAR 2012, 2012, 723–730 [Google Scholar]
  7. T. M. Knasel, Robotics, 2, 149–155, 1986 [CrossRef] [Google Scholar]
  8. T. Arai, E. Pagello, and L. E. Parker, IEEE Transactions on Robotics and Automation, 18, 655–661, 2002 [CrossRef] [Google Scholar]
  9. N. Gubeljak, J. Predan, D. Kozak, J. Tuma, B. Kovacic, P. Konjatic, J. Sertic, Strojarstvo, 51 (4), 263–271 (2009) [Google Scholar]
  10. B. Stamatovic, R. Upadhyay, N. Vatin, Procedia Engineering, 117 (1), 660–667 (2015) [CrossRef] [Google Scholar]
  11. G. Taveggia, J. H. Villafañe, F. Vavassori, C. Lecchi, A. Borboni, and S. Negrini, Journal of Manipulative and Physiological Therapeutics, 37, 242–252, 2014 [CrossRef] [Google Scholar]
  12. J. Xiao, A. Sadegh, M. Elliott, A. Calle, A. Persad, and H. M. Chiu, IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM, 2005, 438–443 [Google Scholar]
  13. B. Melovic, S. Mitrovic, A. Djokaj, and N. Vatin, Procedia Engineering, 2015, 807–812 [Google Scholar]
  14. V.V Okrepilov, Standarty i Kachestvo, 3, 94–96. (2003) [Google Scholar]
  15. V.V Okrepilov, Ivanova G. Standarty i Kachestvo, 12, 62–68. (2004) [Google Scholar]
  16. N. Silva, A. Vale, and L. Baglivo, ICINCO 2013 - Proceedings of the 10th International Conference on Informatics in Control, Automation and Robotics, 2013, 48–57 [Google Scholar]
  17. P. Boucher, Robotica, 89, 2014 [Google Scholar]
  18. A. Borboni, Proc of the IEEE International Conference on Fuzzy Systems, 1, 336–339, 2001 [Google Scholar]
  19. C. Amici, A. Borboni, R. Faglia, D. Fausti, and P. L. Magnani, IEEE/RSJ International Conference on Intelligent Robots and Systems IROS, 2008, 735–740, 2008 [Google Scholar]
  20. A. S. Tubaileh, International Journal of Advanced Manufacturing Technology, 74, 1521–1537, 2014 [CrossRef] [Google Scholar]
  21. A. Yazici, International Journal of Advanced Robotic Systems, 10, 2013 [CrossRef] [Google Scholar]
  22. C. Amici, A. Borboni, P. L. Magnani, and D. Pomi, Proceedings of EUCOMES 2008 - The 2nd European Conference on Mechanism Science, 2008, 479–485, 2009 [Google Scholar]
  23. D. Coman and A. Ionescu, Boundary Value Problems, 2013, 2013 [CrossRef] [Google Scholar]
  24. C. Amici, A. Borboni, and R. Faglia, Advances in Mechanical Engineering, 2, 1–9, 2010 [CrossRef] [Google Scholar]
  25. J. Jezný, Applied Mechanics and Materials 611, 107–114, 2014 [CrossRef] [Google Scholar]
  26. A. Borboni, F. Aggogeri, and R. Faglia, ASME 2014 12th Biennial Conference on Engineering Systems Design and Analysis ESDA 2014, 3, 1–10, 2014 [Google Scholar]
  27. J. Plaskonka, 2012 17th International Conference on Methods and Models in Automation and Robotics, MMAR 2012, 2012, 617–620a [CrossRef] [Google Scholar]
  28. A. Borboni, S. Pandini, D. Cambiaghi, M. Lancini, R. Adamini, R. Faglia, et al., ASME 2014 12th Biennial Conference on Engineering Systems Design and Analysis, ESDA 2014, 3, 1–6, 2014 [Google Scholar]
  29. A. Rodic and G. Mester, Acta Polytechnica Hungarica, 10, 113–133, 2013 [Google Scholar]
  30. L. Ding, Haibogao, YuankaiLi, GuangjunLiu, and ZongquanDeng, Mechanism and Machine Theory, 86, 235–264, 2015 [CrossRef] [Google Scholar]
  31. C. Amici, A. Borboni, P. L. Magnani, and D. Pomi, Proceedings of EUCOMES 2008 - The 2nd European Conference on Mechanism Science, 2008, 487–493, 2009 [Google Scholar]
  32. T. T. Tsung and N. Hoai, Key Engineering Materials 625, 683–688, 2015 [CrossRef] [Google Scholar]
  33. M. Tiboni, A. Borboni, M. Mor, and D. Pomi, Proceedings of the Institution of Mechanical Engineers. Part I: Journal of Systems and Control Engineering, 225, 443–451, 2011 [CrossRef] [Google Scholar]
  34. M. Brunner, T. Fiolka, D. Schulz, and C. M. Schlick, Robotics and Autonomous Systems, 63, 89–107, 2014 [CrossRef] [Google Scholar]
  35. H. Xu, X. Liu, Z. Zhang, and H. Fu, Jiqiren/Robot, 35, 208–217, 2013 [Google Scholar]
  36. A. Borboni, D. De Santis, and R. Faglia, Proceedings of 8th Biennial ASME Conference on Engineering Systems Design and Analysis ESDA2006, 2006, 1–8, 2006 [Google Scholar]
  37. A. Akbarimajd and N. Sotoudeh, Advanced Robotics, 28, 105–117, 2014 [CrossRef] [Google Scholar]
  38. A. Borboni and R. Faglia, Journal of Applied Mechanics Transactions ASME, 80, 1–7, 2013 [CrossRef] [Google Scholar]
  39. J. Al-Azzeh, S. F. Yatsun, A. A. Cherepanov, I. V. Lupehina, and V. S. Dichenko, Research Journal of Applied Sciences, 9, 597–602, 2014 [Google Scholar]
  40. A. Borboni, M. Lancini, and R. Faglia, ASME 2014 12th Biennial Conference on Engineering Systems Design and Analysis ESDA 2014, 2, 1–7, 2014 [Google Scholar]
  41. G. Zhong, Y. Kobayashi, T. Emaru, and Y. Hoshino, JVC/Journal of Vibration and Control, 20, 3–23, 2014 [CrossRef] [Google Scholar]
  42. A. Borboni and M. Lancini, Journal of Vibration and Acoustics, Transactions of the ASME, 137, 1–9, 2015 [CrossRef] [Google Scholar]
  43. I. A. Gravagne, I. D. Walker, and C. D. Rahn, Proceedings of the ASME Design Engineering Technical Conference, 2001, 1943–1952 [Google Scholar]
  44. A. Borboni, D. De Santis, and R. Faglia, ASME 2010 10th Biennial Conference on Engineering Systems Design and Analysis ESDA2010, 2, 99–106, 2010 [CrossRef] [Google Scholar]
  45. T. Chanthasopeephan, A. Jarakorn, P. Polchankajorn, and T. Maneewarn, Robotics and Autonomous Systems, 62, 38–45, 2014 [CrossRef] [Google Scholar]
  46. J. Frémy, F. Ferland, M. Lauria, and F. Michaud, Robotics and Autonomous Systems, 62, 579–590, 2014 [CrossRef] [Google Scholar]
  47. A. Borboni and D. De Santis, Meccanica, 49, 1327–1336, 2014 [Google Scholar]
  48. A. Borboni, R. Faglia, and M. Mor, ASME 2014 12th Biennial Conference on Engineering Systems Design and Analysis ESDA 2014, 1, 1–10, 2014 [Google Scholar]
  49. S. Nam, J. Oh, G. Lee, J. Kim, and T. Seo, Journal of Mechanical Science and Technology, 28, 5175–5187, 2014 [CrossRef] [Google Scholar]
  50. J. Moravec and P. Pošík, Evolutionary Intelligence, 6, 171–191, 2014 [CrossRef] [Google Scholar]
  51. F. Aggogeri, A. Borboni, A. Merlo, and N. Pellegrini, Advanced Materials Research, 590, 252–257, 2012 [CrossRef] [Google Scholar]
  52. A. Borboni, F. Aggogeri, N. Pellegrini, and R. Faglia, Advanced Materials Research, 590, 399–404, 2012 [CrossRef] [Google Scholar]
  53. F. Aggogeri, A. Borboni, R. Faglia, A. Merlo, and S. De Cristofaro, Applied Mechanics and Materials, 336-338, 1170–1173, 2013 [CrossRef] [Google Scholar]
  54. A. Borboni and R. Faglia, Procedia Engineering, 2014, 1378–1381 [CrossRef] [Google Scholar]
  55. W. K. Tey, C. F. Yeong, Y. L. Seow, E. L. M. Su, and S. H. Tang, Applied Mechanics and Materials 607, 791–794, 2014 [CrossRef] [Google Scholar]
  56. D. Zhang, L. Mao, X. N. Tang, Z. B. Li, and J. P. Chen, Applied Mechanics and Materials 347-350, 143–147, 2013 [CrossRef] [Google Scholar]
  57. A. Borboni, F. Aggogeri, and R. Faglia, International Journal of Advanced Robotic Systems, 10, 1–10, 2013 [CrossRef] [Google Scholar]
  58. A. Borboni, F. Aggogeri, N. Pellegrini, and R. Faglia, Advanced Materials Research, 590, 405–410, 2012 [CrossRef] [Google Scholar]
  59. A. Borboni, R. Faglia, and M. Palpacelli, MESA 2014 - 10th IEEE/ASME International Conference on Mechatronic and Embedded Systems and Applications, 1, 1–7, 2014 [CrossRef] [Google Scholar]
  60. V. I. Guzeev and D. Y. Pimenov, Russian Engineering Research, 31, 989–993, 2011 [CrossRef] [Google Scholar]
  61. D. Y. Pimenov, Journal of Friction and Wear, 34, 290–293, 2013 [CrossRef] [Google Scholar]
  62. D. Y. Pimenov, Journal of Friction and Wear, 34, 156–159, 2013 [CrossRef] [Google Scholar]
  63. D. Y. Pimenov, Journal of Friction and Wear, 35, 250–254, 2014 [CrossRef] [Google Scholar]
  64. D. Y. Pimenov, V. I. Guzeev, and A. A. Koshin, Russian Engineering Research, 31, 1151–1155, 2011 [CrossRef] [Google Scholar]
  65. D. Y. Pimenov, V. I. Guzeev, and A. A. Koshin, Russian Engineering Research, 31, 1105–1109, 2011 [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.