Open Access
Issue
MATEC Web of Conferences
Volume 46, 2016
2nd International Seminar for Fire Safety of Facades
Article Number 01005
Number of page(s) 9
Section Standardization and Regulation
DOI https://doi.org/10.1051/matecconf/20164601005
Published online 04 May 2016
  1. ISO 9705, “Fire Tests-Full-scale Room Test for Surface Products”, ISO, 1993
  2. DIN E 4102-20 (draft), “Brandverhalten von Baustoffen und Bauteilen, Teil 20: Besonderer Nachweis für das Brandverhalten von Außenwandbekleidungen”, DIN 2009
  3. CAN/ULC-S134, “Standard Method of Fire Test of Exterior Wall Assemblies (CAN/ULC- S134-92)”, Underwriters Laboratories of Canada, Scarborough, Ontario, 1992
  4. SP FIRE 105, Issue 5, “Large scale testing of facade systems”, SP Boras Sweden, Dnr 171-79-360, 1994
  5. Ondrus, J., “Fire Hazards of Facades with Externally Applied Additional Thermal Insulation”, Report LUTVDG/TVBB-3021 Lund Institute of Technology, Sweden. 1985
  6. Ondrus, J., and Pettersson, O., “Fire Hazards of Facades with Externally Applied Additional Thermal Insulation Full Scale Experiments”, Report LUTVDG/TVBB-3025 Lund Institute of Technology, Sweden, 1986
  7. Ondrus, J., and Pettersson, O., “Fire Hazards of Window-Frames of Plastics, Aluminium and Wood Full Scale Experiments – a comparison”, Report LUTVDG/TVBB-3037 Lund Institute of Technology, Sweden, 1987
  8. Hermodsson, T. and Månsson, L., “Facades: Fire Testing of Materials and Constructions – A First Proposal for a Test Method (SP AR 1992:64)”, Swedish National Testing and Research Institute, 1992
  9. Hildebrand, C., “façade Fire Tests”, Workshop report, Institut für Baustoffe, Leipzig, Germany, 1988
  10. G. M. F. Jeffs, H. G. Klingelhöfer, F. H. Prager, and H. Rosteck, “Fire-performance of a Ventilated Facade Insulated with a B2–classified Rigid Polyurethane Foam”, Fire and Materials, 10, Issue 2, 79–89, June 1986 [CrossRef]
  11. DIN E 4102-20:2016-03 (draft): “Brandverhalten von Baustoffen und Bauteilen - Teil 20: Besonderer Nachweis für das Brandverhalten von Außenwandbekleidungen”, DIN 2016
  12. CAN/ULC-S134, “Standard Method of Fire Test of Exterior Wall Assemblies”, Underwriters Laboratories of Canada, 2013
  13. Sumathipala, K. and Kotthoff, I., “The Development of an International Fire Test Standard for Facades”, Poster, Proceedings of the Fifth International Symposium Fire Safety Science. Melbourne, 1997
  14. Babrauskas, V., “façade Fire Tests: Towards an International Test Standard”, Fire Technology, Third Quarter, pp. 219–230, 1996 [CrossRef]
  15. ISO 13785 part 2, “Reaction to fire tests for façades — Part 2: Large scale test”, ISO, 2001
  16. Hakkarainen, T. and Oksanen, T., “Fire safety assessment of wooden facades”, Fire and Materials, 26: pp. 7–27. doi: 10.1002/fam.780, 2002 [CrossRef]
  17. Hakkarainen, T., “Studies on fire safety assessment of construction products”, Doctoral thesis, VTT publication nr. 459, Espoo 2002
  18. ISO 13785 part 1, “Reaction to fire tests for façades — Part 1: Intermediate-scale test”, ISO, 2001
  19. Van Hees P., “Semi Natural Fire test for façades and curtain wall systems”, Nordtest report 1433-99, SP AR 2000:39, Borås 2000
  20. White N., Delichatsios, M., “Fire Hazards of Exterior Wall Assemblies Containing Combustible Components”, CSIRO report EP142293, CSIRO, June 2014
  21. Wade, C.A. and Clampett, J.C., “Fire Performance of Exterior Claddings”, BRANZ Report FCR 1. Building Research Association of New Zealand. Judgeford, New Zealand, 2000
  22. Wade, C.A., “Fire Performance of External Wall Claddings Under a Performance-based Building Code”, Fire and Materials, 19, pp 127–132, 1995 [CrossRef]
  23. Smolkaa, M., Messerschmidt, B., Scott, J., le Madec, B., “Semi-natural test methods to evaluate fire safety of wall claddings”, 1st International Seminar for Fire Safety of Facades, Paris, MATEC Web of Conferences Volume 9, MATEC Web of Conference, DOI: 10.1051/matecconf/20130902012, 2013
  24. Kotthoff, I., Riemsch-Speer, I., “Mechanism of fire spread on facades and the new Technical Report of EOTA Large-scale fire performance testing of external wall cladding systems”, 1st International Seminar for Fire Safety of Facades, Paris, MATEC Web of Conferences 9, DOI: 10.1051/matecconf/20130902010, 2013
  25. Önorm B 3800-5 (draft), “Fire behaviour of building materials and components – Part 5: Fire behaviour of facades – Requirements, tests and evaluations”, Austrian Standards Institute, 2003
  26. BS 8414-1, “Fire performance of external cladding systems. Part 1: Test method for non-loadbearing external cladding systems applied to the masonry face of a building”, BSI, 2015
  27. BS 8414-2, “Fire performance of external cladding systems, Part 2: Test method for non-loadbearing external cladding systems fixed to and supported by a structural steel frame”, BSI, 2015
  28. LPS 158: Issue 2.0:2010, “Requirements and tests for LPCB approval of non-loadbearing external cladding systems applied to the masonry face of a building, 2010
  29. LPS 158: Issue 1.0:2010, Requirements and tests for LPCB approval of non-loadbearing external cladding systems fixed to and supported by a structural steel frame, 2010
  30. L.E.P.I.R. 2 (Local expérimental pour incendie réel à deux niveaux), Arrêté du 10 septembre 1970 relatif à la classification des façades vitrées par rapport au danger d'incendie, Version consolidée au 16 février 2016, French test method for fire spread, downloaded from www.legifrance.gouv.fr on 20151220, 1970
  31. NFPA 285, “Standard Fire Test Method for Evaluation of Fire Propagation Characteristics of Exterior Non-Load-Bearing Wall Assemblies Containing Combustible Components”, NFPA, 2012
  32. NFPA 268, “Standard Test Method for Determining Ignitibility of Exterior Wall Assemblies Using a Radiant Heat Energy Source”, NFPA, 2012
  33. BR 135, “Fire performance of external thermal insulation for walls of multi-storey buildings, second edition”, BRE report, 2003
  34. Strömgren, M., Albrektsson, J., Johansson, A., Almgren, E., “Comparative analysis of façade regulations in the Nordic countries, 1st International Seminar for Fire Safety of Facades, MATEC Web of Conferences 9, DOI: 10.1051/matecconf/20130901003, 2013
  35. Didieux, F., “Facade fire – fire safety engineering methodology”, 1st International Seminar for Fire Safety of Facades, Paris, MATEC Web of Conferences 9, MATEC Web of Conference, DOI: 10.1051/matecconf/20130903010, 2013
  36. Mikkola, E., Hakkarainen, T., and Matala, A., “Fire safety of EPS ETICS in residential multi-storey buildings”, VTT report VTT-R-04632-13, Espoo, 2013
  37. Van Hees, P., “Validation and Verification of Fire Models for Fire Safety Engineering”, Procedia Engineering, 62, 2013, Pages 154–168, 9th Asia-Oceania Symposium on Fire Science and Technology, DOI:10.1016/j.proeng.2013.08.052, 2013 [CrossRef]
  38. Johansson, N., “Fallstudie av konstruktionsbränder (in Swedish)”, LTH report 3191, ISSN: 1402-3504 ISRN: LUTVDG/TVBB–3191—SE, Lund, 2015
  39. Règlement de sécurité contre l'incendie relatif aux établissements recevant du public Livre II: Dispositions applicables aux établissements des quatre premières catégories Titre premier: Dispositions generals, Chapitre II: Construction Instruction technique n249 Relative aux façades, http://www.sitesecurite.com/ERPIT/IT24900.htm#0, Downloaded 20151220, 2015
  40. Yoshioka, H., Ohmiya, Y., Masaki Noaki; M. And Yoshida, M., “Large-scale Facade Fire Tests Conducted Based on ISO 13785-2 with Noncombustible Facade Specimens”, Fire Science and Technology 31, No. 1, 1–22, 2012 [CrossRef]
  41. Yoshioka, H., Ohmiya, Y., Masaki Noaki; M. And Yoshida, M., “Large-scale Facade Fire Tests Conducted Based on ISO 13785-2 with Noncombustible Facade Specimens”, Fire Science and Technology 31, No. 1, 1–22, 2012 [CrossRef]
  42. Macdonald, M., “A comparison of BS 8414-1 & -2, draft DIN 4102-20, ISO 13785-1 & -2”, EN 13823 and EN ISO 11925-2”, Report number CC275194 issue 2. BRE Global Ltd. 2012
  43. Messerschmidt, B., Fellman, J., “Fire Testing of ETICS a comparative study”. Proceedings of International Conference Interflam 2013, Windsor, UK. Interscience Communications, 2013

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.