Open Access
MATEC Web of Conferences
Volume 34, 2015
2015 2nd International Conference on Mechatronics and Mechanical Engineering (ICMME 2015)
Article Number 01006
Number of page(s) 5
Section Materials science and engineering
Published online 11 December 2015
  1. D. Rakwal and E. Bamberg, Cleaning Slicing and Kerf Analysis of Germanium Wafers Machined by Wire Electrical Discharge Machining, J. Mater. Process. Technol. 8, 3740–3751(2009) [CrossRef] [Google Scholar]
  2. K. H. Ho, S.T. Newman, S. Rahimifard, R.D. Allen. State of the art in wire electrical discharge machining (WEDM). International Journal of Machine Tools & Manufacture. 44,1247–1259(2004) [Google Scholar]
  3. Guo XZ, Yang H, Zhang LJ, Zhu XY. Sintering behavior, microstructure and mechanical properties of silicon carbide ceramics containing different nano-TiN additive. Ceram Int 2010; 36,161–5(2010) [CrossRef] [Google Scholar]
  4. Simba BG, Santos C, Bondioli MJ, Strecker K, Lima ES, Prado da Silva MH. Strength improvement of LPS-SiC ceramics by oxidation treatment. Int J Refract Met Hard Mater 2010; 28,484–8(2010) [CrossRef] [Google Scholar]
  5. Margiotta JC, Zhang DJ, Nagle DC. Microstructural evolution during silicon carbide (SiC) formation by liquid silicon infiltration using optical microscopy. Int J Refract Met Hard Mater 2010;28,191–7(2010) [CrossRef] [Google Scholar]
  6. Strecker K, Ribeiro S, Oberacker R, Hoffmann MJ. Influence of microstructural variation on fracture toughness of LPS-SiC ceramics. Int J Refract Met Hard Mater 2004;22,169–75(2004) [CrossRef] [Google Scholar]
  7. Yang XH, Zhang YM, Han JC. High speed lapping of SiC ceramic material with fixed abrasive. Key Eng Mater 336–338,1458–60(2007) [CrossRef] [Google Scholar]
  8. Shumyacher VM, Dushko OV, Pushkarev DO. Predicting the grinding efficiency of hard ceramics in terms of surface brittleness. Russ Eng Res 2009;29,623–4(2009) [CrossRef] [Google Scholar]
  9. Agarwal S, Rao PV. Experimental investigation of surface/subsurface damage formation and material removal mechanisms in SiC grinding. Int J Mach Tools Manuf 2008;48,698–710(2009) [Google Scholar]
  10. Lee, B. T., Yoon, Y. J. and Lee, K. H., Microstructural characterization of electroconductive Si3N4–TiN Composites. Mater. Lett., 47, 71–76(2001) [CrossRef] [Google Scholar]
  11. Lian Gao, Jingguo Lia, Takafumi Kusunoseb, Koichi Niiharab. Preparation and properties of TiN–Si3N4 composites. Journal of the European Ceramic Society. 2004,24,381–386(2004) [CrossRef] [Google Scholar]
  12. Biing Hwa Yan, Hsien Chung Tsai, Fuang Yuan Huang, Long Chorng Lee. Examination of wire electrical discharge machining of Al2O3p/6061Al composites. International Journal of Machine Tools & Manufacture, 45, 251–259 (2005) [Google Scholar]
  13. Ahmet Hasçalýk, Ulas Çaydas. Experimental study of wire electrical discharge machining of AISI D5 tool steel, Journal of Materials Processing Technology, 148, 362–367(2004) [CrossRef] [Google Scholar]
  14. N.P. Hung, L.J. Yang, K.W. Leong, Electrical discharge machining of cast metal matrix composites, Journal of Materials Processing Technology 44, 229–236 (1994) [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.