Open Access
MATEC Web of Conferences
Volume 34, 2015
2015 2nd International Conference on Mechatronics and Mechanical Engineering (ICMME 2015)
Article Number 01005
Number of page(s) 5
Section Materials science and engineering
Published online 11 December 2015
  1. Anon, USA advanced ceramics demand, Materials Technology 20, 168(2005)
  2. S.W. Yao, H. Wang, S.L. Wang, The study and application of the special ceramics, Industrial Heating 35, 1–4(2006)
  3. J.H. Du, Y.H. Liu, X.P. Li, C.Y. Miao, N.G. Hong, Z.M. Xiao, The grinding technology of engineering ceramics, Materials for Mechanical Engineering 29, 1–6 (2005)
  4. N. Mohri, Y.T. Fukuzawa, T. Sata, Some considerations to machining characteristics of insulating ceramics—towards practical use in industry, Annals of the CIRP 51, 161–164 (2002) [CrossRef]
  5. S. Agarwal, P. Venkateswara Rao, A new surface roughness prediction model for ceramic grinding, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 219, 811–821(2005) [CrossRef]
  6. X.P. Li, Y.H. Liu, R.J. Ji, L.L. Yu, Non-traditional machining technique for insulating engineering ceramics, Electromachining & Mould 40, 6–9(2006)
  7. A.V. Gopal, P.V. Rao, Modeling of grinding of silicon carbide with diamond wheels, Mineral Processing and Extractive Metallurgy Review 23, 51–63(2002) [CrossRef]
  8. Y.H. LiuÃ, R.J. Ji, X.P. Li, L.L. Yu, H.F. Zhang, Q.Y. Li, Effect of machining fluid on the process performance of electric discharge milling of insulating Al2O3 ceramic, International Journal of Machine Tools & Manufacture 48, 1030–1035 (2008) [CrossRef]
  9. Y.F. Guo, J.C. Bai, G.Q. Deng, Z.S. Lu, High-speed wire electrical discharge machining (HS-WEDM) phenomena of insulating Si3N4 ceramics with assisting electrode, Key Engineering Materials 339, 281–285 (2007) [CrossRef]
  10. Y.H. Liu, Z.X. Jia, J.C. Liu, Study on hole machining of non-conducting ceramics by gas-filled electrodischarge and electrochemical compound machining, Journal of Materials Processing Technology 69, 198–202(1997) [CrossRef]
  11. Y. Fukuzawa, H. Gotoh, N. Mohri, T. Tani, Line swept surface generation on insulating ceramics by wire electrical discharge machining, Journal of the Australasian Ceramic Society 4, 17–21 (2005)
  12. B. Bhattacharyya, B.N. Doloi, Experimental investigations into electrochemical discharge machining (ECDM) of non-conductive ceramic materials, Journal of Materials Processing Technology 95, 145–154(1999) [CrossRef]
  13. Y.F. Guo, J.C. Bai, H.S. Liu, J.C. Liu, N. Mohri, Y. Fukuzawa, The study of the process of machining insulating ceramics by electrical discharge grilling, Electromachining & Mould 40, 54–64(2006)
  14. Y.T. Tani, N. Mohri, A. Muttamara, Micro hole electrical discharge machining on insulating ceramics with pipe electrode, International Journal of Electrical Machining 8, 57–61 (2003)
  15. T. Tani, Y. Fukuzawa, K. Furutani, N. Mohri, Machining process of insulating ceramics by electrical discharge machining, Journal of the Japan Society for Precision Engineering 63, 1310–1314(1997) [CrossRef]
  16. B. T. Lee, Y. J. Yoon and K. H. Lee, Microstructural characterization of electroconductive Si3N4–TiN Composites. Mater. Lett., 47, 71–76(2001) [CrossRef]
  17. Lian Gao, Jingguo Lia, Takafumi Kusunoseb, Koichi Niiharab. Preparation and properties of TiN–Si3N4 composites. Journal of the European Ceramic Society. 24:381–3(2004) [CrossRef]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.