Open Access
MATEC Web of Conferences
Volume 11, 2014
International Congress on Materials & Structural Stability
Article Number 01032
Number of page(s) 8
Section Materials & Pathologies
Published online 28 April 2014
  1. Abd.El-Aziz, H., “Physico-Chemical Studies of Alkali Acivated Slag Pastes”, Master Theses, Zagazig University, Zagazig, Egypt,2010.
  2. Alomo, A.; Blanco-Varela, M. T.; Puertasa, F.; Vazquez, T.; Grutzeck, M.W., (1999) “Chemical Stability of Cementitious Materials Based on Metakaolin”, Cem. Concr. Res., 29(7); 997–1004. [CrossRef]
  3. ASTM C109M-07, “Standard Test Method for Compressive Strength of Hydraulic Cement Mortars”, 2007.
  4. Bakharev, T.(2005) “Resistance of geopolymer materials to acid attack”, Cement and Concrete Research, 35(4), 658–670. [CrossRef]
  5. Bakharev, T.; Sanjayan, J. G.; Cheng, J. B., (2003) “Resistance of alkali-activated slag concrete to acid attack. Cement and Concrete Research, 33(10); 1607–1611. [CrossRef]
  6. Bakharev, T., (2006) “Thermal behaviour of geopolymers prepared using class F fly ash and elevated temperature curing”, Cement and Concrete Research, 36(6);1134–1147. [CrossRef]
  7. Barbosa, V.F.F.; MacKenzie, K.J.D., (2003) “Synthesis and thermal behaviour of potassium sialate geopolymers”, Mater. Lett., 57,1477–1482. [CrossRef]
  8. Davidovits J.(1997) “Geopolymers: Inorganic Polymeric New Materials”, J. Therm. Anal., 37, 1633–1656. [CrossRef]
  9. Davidovits, J., “High-Alkali Cements for 21st Century Concretes”. Paper presented at the V. Mohan Malhotra Symposium on Concrete Technology: Past, Present and Future, University of California, Berkeley, 1994a.
  10. Davidovits, J., “Properties of geopolymer cements, Proceedings First International Conference on Alkaline Cements and Concretes, 1, SRIBM, Kiev, Ukraine, 131–149,1994b.
  11. Davidovits, J.; Davidovits, M.; Davidovits, N., “Process for obtaining a geopolymeric aluminosilicate and products thus obtained”, US Patent (5,342,595), 1994.
  12. Douglas, E; Bilodeau, A; Brandstetr, J.; Malhotra, V.M., (1992) “Properties and durability of alkali-activated slag concrete”, ACI Mater J., 89(5), 101–8.
  13. Duxson, P.; Fernández-Jiménez, A.; Provis, J.L.; Lukey, G.C.; Palomo, A.; van Deventer, J.S.J., (2007) “Geopolymer technology: the current state of the art”, J. Mater. Sci. 42, 2917–2933. [CrossRef]
  14. El-Sayed, H.A; Abo El-Enein, S.A.; Khater, H.M.; Hasanein, S.A., (2011) “Resistance of Alkali Activated Water Cooled Slag Geopolymer to Sulfate Attack”, Ceramics – Silikáty, 55 (2), 153–160.
  15. Glukhovsky, V.D., “High strength slag alkaline cements”. In: Proceedings of the 7th international congress on the chemistry of cement, Paris; 1980.
  16. Glukhovsky, V.D., (1980) “High strength slag alkaline cements”, In: Proceedings of the 7th international congress on the chemistry of cement, Paris.
  17. Gourley, J. T.; Johnson, G. B., “Developments in Geopolymer Precast Concrete”. Paper presented at the International Workshop on Geopolymers and Geopolymer Concrete, Perth, Australia, 2005.
  18. Heikal, M.; Radwan, M.M.; Morsy, M.S., (2004) “Influence of Curing Temperature on the Physicomechanical, characteristics of Calcium Aluminate Cement with Air –Cooled Slag or Water-Cooled Slag”, Ceramics – Silikáty, 48 (4), 185–196.
  19. Khale, D.; Chaudhary, R., (2007) “Mechanism of geopolymerization and factors influencing its development: a review”, J. Mater. Sci., 42, 729–746. [CrossRef]
  20. Kong, Daniel L.Y.; Sanjayan Jay G. (2008) “Damage behavior of geopolymer composites exposed to elevated temperatures”, Cement & Concrete Composites, 30, 986–991. [CrossRef]
  21. Krivenko, P.V.; Kovalchuk, G.Yu., (2002) “Heat-resistant fly ash based geocements”, Proceedings of the Int. Conf. Geopolymer 28th–29th October 2002, Melbourne, Australia, 2002.
  22. Lyon, R.E.; Balaguru, P.N.; Foden, A.; Sorathia, U.; Davidovits, J.; Davidovits, M., “Fire response of geopolymer structural composites”, Proceedings of 1st Int. Conf. Fiber Composites in Infrastructure (ICCI’96), Tuscon, Jan. 15–17, 1996, Dept. Civ. Eng., Univ. of Arizonapp, 972–981,1996.
  23. Osborne, G.J., “The sulfate resistance of Portland and blast furnace slag cement concretes”. In: Proceeding of second international conference on the durability of concrete, SP-126 Montreal, Canada, 1047–71, 1991.
  24. Pal, S.C.; Mukherjee, A.; Pathak, S.R., (2002) “Corrosion behaviour of reinforcement in slag concrete”, ACI Mater J., 99(6); 521–7.
  25. Palomo, A.; Grutzeck, M.W.; Blanco-Varela, M.T., (1999) “Alkali activated fly ashes: a cement for the future”, Cem. Concr. Res., 29, 1323–1329. [CrossRef]
  26. Saikia, N.; Usami, A.; Kato, S.; Kojima, T., (2004) “Hydration behavior of ecocement in presence of metakaolin”, resource progressing journal, 51(1), 35–41. [CrossRef]
  27. Song, S.; Jennings, H.M., (1999) “Pore solution chemistry of alkali-activated ground granulated blast-furnace slag”, Cem. Concr. Res., 29, 159–170. [CrossRef]
  28. Song, X. J.; Marosszeky; Brungs, M.; Munn, R., “Durability of fly ash-based Geopolymer concrete against sulphuric acid attack”. Paper presented at the10 DBMC International Conference on Durability of Building Materials and Components, Lyon, France, 2005.
  29. Talling, B. Brandstetr J. “Present state and future of alkali activated slag concretes”. In: Proceedings of the third international conference on fly ash, silica fume, slag and natural Pozzolans in concrete, Trondheim, SP114-72, 1519–46, 1989.
  30. Van Vlack, H., ( 1964 ) “Physical Ceramics for Engineers”, Addison-Wesley, London, 94–102, 1964.
  31. Wang, S.-D.; Pu, X.C.; Scrivener, K.L.; Pratt, P.L., (1995) “Alkali activated slag cement and concrete: a review of properties and problems”, Adv. Cem.Res. 7 (27), 93–102. [CrossRef]
  32. Wenying, G.; Guolin, W.; Jianda, W.; Ziyun, W.; Suhong, Y., (2008) “Preparation and Performance of Geopolymers”, Journal of Wuhan University of Technology-Mater. Sci. Ed., 23(3), 326–330. [CrossRef]
  33. Wickström, U.; Hadziselimovic, E., (1996) “Equivalent concrete layer thickness of a fire protection insulation layer”, Fire Saf. J., 26, 295–302. [CrossRef]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.