Issue |
MATEC Web Conf.
Volume 400, 2024
5th International Conference on Sustainable Practices and Innovations in Civil Engineering (SPICE 2024)
|
|
---|---|---|
Article Number | 02011 | |
Number of page(s) | 15 | |
Section | Geotechnical and Environmental Engineering | |
DOI | https://doi.org/10.1051/matecconf/202440002011 | |
Published online | 03 July 2024 |
Generating Spatial Distribution and Forecasting the Rainfall by Suitable ML Models-A Case Study of Aiyar River Basin, Tiruchirappalli District
1 Assistant Professor, Sri Sivasubramaniya Nadar (SSN) College of Engineering, Kalavakkam - 603110, Tamilnadu, India.
2 Scientist, KSCSTE National Transportation Planning and Research Centre (NATPAC), Thiruvananthapuram 695 011, Kerala, India.
* Corresponding author surendarnatrajan86@gmail.com, surendarn@ssn.edu.in
Email: jegancivil@gmail.com
Rainfall plays a prominent role in managing of water resources. The accurate prediction of rainfall is the greatest challenge in the field of hydrologic studies. The prediction of rainfall is necessary to overcome natural disasters like flood and drought. The inaccurate prediction of rainfall causes either dry or overflow in water storage structures. In this study different types of Machine Learning (ML) and deep learning techniques are adopted to predict rainfall pattern of Aiyar river basin, in Tiruchirappalli district. The comparative study of these ML models is done to identify the best ML model for the study area. The comparison was done for different scenarios and time intervals. The rainfall data from years 1987 to 2023 is used for predicting the daily rainfall in the basin. The rainfall data from years 1987 to 2007 is used for testing and the remaining years data is used for training the data set. The Theisen polygon method is used to average and weighted the rainfall data in the basin. The ML models and deep learning techniques used in this study are Linear model, Support Vector Machine (SVM) and Long Short-Term Memory (LSTM) models. The rainfall was predicted for different time scenario by using different ML algorithms like Autocorrelation method. The accuracy of the predicted model results was tested with RMSE, MASE and R square values. The result shows coefficient between 0.5 to 0.9 within the limit from the daily rainfall values. From the overall model comparison, it is observed that the SVM model accuracy is high compared to the other models involved in this study. It is concluded that two different methods ML and deep learning methods have been applied with same data in which SVM ML techniques gives better results in this study area. In future the predicted rainfall data of this study can be used for accurate flood forecasting and modelling of Aiyar basin.
Key words: Rainfall Prediction / Arc-GIS / ML Techniques / SVR / Aiyar basin
© The Authors, published by EDP Sciences, 2024
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.