| Issue |
MATEC Web Conf.
Volume 380, 2023
4th International Symposium on Mechanics, Structures and Materials Science (MSMS 2023)
|
|
|---|---|---|
| Article Number | 01009 | |
| Number of page(s) | 3 | |
| DOI | https://doi.org/10.1051/matecconf/202338001009 | |
| Published online | 01 May 2023 | |
Design of a NC machine tool for machining that is easy to change cutting tools
Anhui Technical College Of Mechanical and Electrical Engineering, Wuhu, Anhui, China
A CNC machine tool for machining designed to facilitate the replacement of cutting tools includes a workbench, a motor and a hydraulic cylinder. The inner bearing of the workbench is connected with a rotating rod, the outer key of the rotating rod is connected with a half gear, and the output end of the motor is connected with the lower end of the rotating rod. The CNC machine tool for machining, which is convenient for replacing cutting tools, realizes the linkage between the cutting tool body and the adjusting gear by using the tooth block, and drives the adjusting rod to move by using the rotation of the screw rod to adjust the position between the pawl and the ratchet teeth. The rotation of the adjusting gear is limited by using the pawl and the ratchet teeth, so as to lock the cutting tool body and quickly disassemble and install the cutting tool body.
Key words: CNC machine / cutting tools / machining / replacement.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.